Códigos ASME para la industria Oil & Gas

René Becerra Matías

Códigos ASME para la industria Oil & Gas

Conocer las similitudes y diferencias entre las versiones del código ASME para cañerías a presión.

2

Códigos ASME para la industria Oil & Gas

ESTA PRESENTACION DEBE CONSIDERARSE COMO UNA REFERENCIA QUE NO SUSTITUYE A LAS VERSIONES ORIGINALES Y VIGENTES DE LAS NORMAS INDICADAS. SU PROPÓSITO ES EXPONER ALGUNOS DE LOS ASPECTOS QUE SE CONSIDERAN RELEVANTES PERO NO CONTIENE NECESARIAMENTE TODA LA INFORMACIÓN PARA ATENDER NECESIDADES ESPECÍFICAS.

3

• Diferenciar fecha de publicación de fecha efectiva. • Respuestas a interpretaciones. • Erratas efectivas desde su publicación.

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Intro

4

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Intro

5

• Códigos ANSI. • Límites de ASME con la industria. • Responsabilidad sólo por las interpretaciones.

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Intro

6

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Intro

7

• Each of the codes refers to a piping system. • While the specific definition of a piping system may vary from codebook

to codebook, this simplified definition treats a piping system according to the following:

A piping system is a set of components including pipe, pipe fittings, flanges, bolting, gaskets, relief devices, and the pressure-retaining parts included in any stress analysis. It also includes the hangers, supports, and other equipment necessary to prevent overstressing of the pressure retaining parts. It does not include the structure and equipment and foundations, except as they may affect the stress analysis. • This definition comes mainly from the B31.7 1969 edition. It captures

the gist of the many separate definitions each book might offer as well as the reason for the codes. That reason is to define the design and fabrication of a system that offers a reasonable expectation of being safe when operated as intended.

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Sistemas de Cañerías

8

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Sistemas de Cañerías

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

9

PROCESS PIPING

• Chapter I Scope and Definitions

• Chapter II Design • Chapter III Materials • Chapter IV Standards for

Piping Components • Chapter V Fabrication,

Assembly and Erection • Chapter VI Inspection,

Examination and Testing • Chapter VII Non Metallic

Piping and Piping Lined With Non Metals

A300 General Statements • Chapter VIII Piping for

Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure

Piping K300 General Statements • Chapter X High Purity

Piping U300 General Statements

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional

Requirements • Chapter V Construction,

Welding, and Assembly • Chapter VI Inspection

and Testing • Chapter VII Operation

and Maintenance Procedures

• Chapter VIII Corrosion Control

• Chapter IX Offshore Liquid Pipeline Systems

A400 General Statements • Chapter X Carbon Dioxide

Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline

Systems C400 General Statements

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions • Chapter I Materials and

Equipment • Chapter II Welding • Chapter III Piping System

Components and Fabrication Details

• Chapter IV Design, Installation, and Testing

• Chapter V Operating and Maintenance Procedures

• Chapter VI Corrosion Control

• Chapter VII Intentionally Left Blank

• Chapter VIII Offshore Gas Transmission

A800 Offshore Gas Transmission • Chapter IX Sour Gas

Service B800 Sour Gas Service

10

PROCESS PIPING

• Appendices • A Allowable Stresses and Quality

Factors for Metallic Piping and Bolting Materials

• B Stress Tables and Allowable Pressure Tables for Nonmetals

• C Physical Properties of Piping Materials

• D Flexibility and Stress Intensification Factors

• E Reference Standards • F Precautionary Considerations • G Safeguarding • H Sample Calculations for Branch

Reinforcement • J Nomenclature • K Allowable Stresses for High Pressure

Piping • L Aluminum Alloy Pipe Flanges • M Guide to Classifying Fluid Services • N Application of ASME B31.3

Internationally • P Alternative Rules for Evaluating

Stress Range • Q Quality System Program • S Piping System Stress Analysis

Examples • V Allowable Variations in Elevated

Temperature Service • X Metallic Bellows Expansion Joints • Z Preparation of Technical Inquiries

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing 10.- Integrity

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Mandatory Appendix • I Referenced Standards Nonmandatory

Appendices • A Submittal of Technical Inquiries to

the B31 Pressure Piping Committee • B Publications That Do Not Appear in

the Code or Mandatory

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• Appendices • Mandatory Appendix A References • Mandatory Appendix B Numbers and

Subjects of Standards and Specifications That Appear in Mandatory Appendix A

• Nonmandatory Appendix C Publications That Do Not Appear in the Code or Mandatory Appendix A

• Mandatory Appendix D Specified Minimum Yield Strength for Steel Pipe Commonly Used in Piping Systems

• Mandatory Appendix E Flexibility and Stress Intensification Factors

• Mandatory Appendix F Extruded Headers and Welded Branch Connections

• Mandatory Appendix G Testing of Welders Limited to Work on Lines Operating at Hoop Stresses of Less Than 20% of the Specified Minimum Yield Strength

• Mandatory Appendix H Flattening Test for Pipe

• Mandatory Appendix I End Preparations for Buttwelding

• Nonmandatory Appendix J Commonly Used Conversion Factors

• Mandatory Appendix K Criteria for Cathodic Protection

• Nonmandatory Appendix L Determination of Remaining Strength of Corroded Pipe

• Nonmandatory Appendix M Gas Leakage Control Criteria

• Nonmandatory Appendix N Recommended Practice for Hydrostatic Testing of Pipelines in Place Nonmandatory Appendix O Preparation of Technical Inquiries

• Nonmandatory Appendix P Nomenclature for Figures

• Mandatory Appendix Q Scope Diagrams Nonmandatory Appendix R Estimating Strain in Dents

11

PROCESS PIPING

• Chapter I Scope and Definitions

• Chapter II Design • Chapter III Materials • Chapter IV Standards for

Piping Components • Chapter V Fabrication,

Assembly and Erection • Chapter VI Inspection,

Examination and Testing • Chapter VII Non Metallic

Piping and Piping Lined With Non Metals

A300 General Statements • Chapter VIII Piping for

Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure

Piping K300 General Statements • Chapter X High Purity

Piping U300 General Statements

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional

Requirements • Chapter V Construction,

Welding, and Assembly • Chapter VI Inspection

and Testing • Chapter VII Operation

and Maintenance Procedures

• Chapter VIII Corrosion Control

• Chapter IX Offshore Liquid Pipeline Systems

A400 General Statements • Chapter X Carbon Dioxide

Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline

Systems C400 General Statements

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions • Chapter I Materials and

Equipment • Chapter II Welding • Chapter III Piping System

Components and Fabrication Details

• Chapter IV Design, Installation, and Testing

• Chapter V Operating and Maintenance Procedures

• Chapter VI Corrosion Control

• Chapter VII Intentionally Left Blank

• Chapter VIII Offshore Gas Transmission

A800 Offshore Gas Transmission • Chapter IX Sour Gas

Service B800 Sour Gas Service

12

PROCESS PIPING

• Chapter I Scope and Definitions

• Chapter II Design • Chapter III Materials • Chapter IV Standards for

Piping Components • Chapter V Fabrication,

Assembly and Erection • Chapter VI Inspection,

Examination and Testing • Chapter VII Non Metallic

Piping and Piping Lined With Non Metals

A300 General Statements • Chapter VIII Piping for

Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure

Piping K300 General Statements • Chapter X High Purity

Piping U300 General Statements

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional

Requirements • Chapter V Construction,

Welding, and Assembly • Chapter VI Inspection

and Testing • Chapter VII Operation

and Maintenance Procedures

• Chapter VIII Corrosion Control

• Chapter IX Offshore Liquid Pipeline Systems

A400 General Statements • Chapter X Carbon Dioxide

Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline

Systems C400 General Statements

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions • Chapter I Materials and

Equipment • Chapter II Welding • Chapter III Piping System

Components and Fabrication Details

• Chapter IV Design, Installation, and Testing

• Chapter V Operating and Maintenance Procedures

• Chapter VI Corrosion Control

• Chapter VII Intentionally Left Blank

• Chapter VIII Offshore Gas Transmission

A800 Offshore Gas Transmission • Chapter IX Sour Gas

Service B800 Sour Gas Service

13

PROCESS PIPING

• Chapter I Scope and Definitions

• Chapter II Design • Chapter III Materials • Chapter IV Standards for

Piping Components • Chapter V Fabrication,

Assembly and Erection • Chapter VI Inspection,

Examination and Testing • Chapter VII Non Metallic

Piping and Piping Lined With Non Metals

A300 General Statements • Chapter VIII Piping for

Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure

Piping K300 General Statements • Chapter X High Purity

Piping U300 General Statements

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional

Requirements • Chapter V Construction,

Welding, and Assembly • Chapter VI Inspection

and Testing • Chapter VII Operation

and Maintenance Procedures

• Chapter VIII Corrosion Control

• Chapter IX Offshore Liquid Pipeline Systems

A400 General Statements • Chapter X Carbon Dioxide

Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline

Systems C400 General Statements

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions • Chapter I Materials and

Equipment • Chapter II Welding • Chapter III Piping System

Components and Fabrication Details

• Chapter IV Design, Installation, and Testing

• Chapter V Operating and Maintenance Procedures

• Chapter VI Corrosion Control

• Chapter VII Intentionally Left Blank

• Chapter VIII Offshore Gas Transmission

A800 Offshore Gas Transmission • Chapter IX Sour Gas

Service B800 Sour Gas Service

14

PROCESS PIPING

• Chapter I Scope and Definitions

• Chapter II Design • Chapter III Materials • Chapter IV Standards for

Piping Components • Chapter V Fabrication,

Assembly and Erection • Chapter VI Inspection,

Examination and Testing • Chapter VII Non Metallic

Piping and Piping Lined With Non Metals

A300 General Statements • Chapter VIII Piping for

Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure

Piping K300 General Statements • Chapter X High Purity

Piping U300 General Statements

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional

Requirements • Chapter V Construction,

Welding, and Assembly • Chapter VI Inspection

and Testing • Chapter VII Operation

and Maintenance Procedures

• Chapter VIII Corrosion Control

• Chapter IX Offshore Liquid Pipeline Systems

A400 General Statements • Chapter X Carbon Dioxide

Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline

Systems C400 General Statements

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions • Chapter I Materials and

Equipment • Chapter II Welding • Chapter III Piping System

Components and Fabrication Details

• Chapter IV Design, Installation, and Testing

• Chapter V Operating and Maintenance Procedures

• Chapter VI Corrosion Control

• Chapter VII Intentionally Left Blank

• Chapter VIII Offshore Gas Transmission

A800 Offshore Gas Transmission • Chapter IX Sour Gas

Service B800 Sour Gas Service

15

PROCESS PIPING

• Chapter I Scope and Definitions

• Chapter II Design • Chapter III Materials • Chapter IV Standards for

Piping Components • Chapter V Fabrication,

Assembly and Erection • Chapter VI Inspection,

Examination and Testing • Chapter VII Non Metallic

Piping and Piping Lined With Non Metals

A300 General Statements • Chapter VIII Piping for

Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure

Piping K300 General Statements • Chapter X High Purity

Piping U300 General Statements

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional

Requirements • Chapter V Construction,

Welding, and Assembly • Chapter VI Inspection

and Testing • Chapter VII Operation

and Maintenance Procedures

• Chapter VIII Corrosion Control

• Chapter IX Offshore Liquid Pipeline Systems

A400 General Statements • Chapter X Carbon Dioxide

Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline

Systems C400 General Statements

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions • Chapter I Materials and

Equipment • Chapter II Welding • Chapter III Piping System

Components and Fabrication Details

• Chapter IV Design, Installation, and Testing

• Chapter V Operating and Maintenance Procedures

• Chapter VI Corrosion Control

• Chapter VII Intentionally Left Blank

• Chapter VIII Offshore Gas Transmission

A800 Offshore Gas Transmission • Chapter IX Sour Gas

Service B800 Sour Gas Service

16

PROCESS PIPING

• Chapter I Scope and Definitions

• Chapter II Design • Chapter III Materials • Chapter IV Standards for

Piping Components • Chapter V Fabrication,

Assembly and Erection • Chapter VI Inspection,

Examination and Testing • Chapter VII Non Metallic

Piping and Piping Lined With Non Metals

A300 General Statements • Chapter VIII Piping for

Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure

Piping K300 General Statements • Chapter X High Purity

Piping U300 General Statements

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional

Requirements • Chapter V Construction,

Welding, and Assembly • Chapter VI Inspection

and Testing • Chapter VII Operation

and Maintenance Procedures

• Chapter VIII Corrosion Control

• Chapter IX Offshore Liquid Pipeline Systems

A400 General Statements • Chapter X Carbon Dioxide

Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline

Systems C400 General Statements

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions • Chapter I Materials and

Equipment • Chapter II Welding • Chapter III Piping System

Components and Fabrication Details

• Chapter IV Design, Installation, and Testing

• Chapter V Operating and Maintenance Procedures

• Chapter VI Corrosion Control

• Chapter VII Intentionally Left Blank

• Chapter VIII Offshore Gas Transmission

A800 Offshore Gas Transmission • Chapter IX Sour Gas

Service B800 Sour Gas Service

17

PROCESS PIPING

• Chapter I Scope and Definitions

• Chapter II Design • Chapter III Materials • Chapter IV Standards for

Piping Components • Chapter V Fabrication,

Assembly and Erection • Chapter VI Inspection,

Examination and Testing • Chapter VII Non Metallic

Piping and Piping Lined With Non Metals

A300 General Statements • Chapter VIII Piping for

Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure

Piping K300 General Statements • Chapter X High Purity

Piping U300 General Statements

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional

Requirements • Chapter V Construction,

Welding, and Assembly • Chapter VI Inspection

and Testing • Chapter VII Operation

and Maintenance Procedures

• Chapter VIII Corrosion Control

• Chapter IX Offshore Liquid Pipeline Systems

A400 General Statements • Chapter X Carbon Dioxide

Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline

Systems C400 General Statements

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions • Chapter I Materials and

Equipment • Chapter II Welding • Chapter III Piping System

Components and Fabrication Details

• Chapter IV Design, Installation, and Testing

• Chapter V Operating and Maintenance Procedures

• Chapter VI Corrosion Control

• Chapter VII Intentionally Left Blank

• Chapter VIII Offshore Gas Transmission

A800 Offshore Gas Transmission • Chapter IX Sour Gas

Service B800 Sour Gas Service

18

PROCESS PIPING

• Chapter I Scope and Definitions

• Chapter II Design • Chapter III Materials • Chapter IV Standards for

Piping Components • Chapter V Fabrication,

Assembly and Erection • Chapter VI Inspection,

Examination and Testing • Chapter VII Non Metallic

Piping and Piping Lined With Non Metals

A300 General Statements • Chapter VIII Piping for

Catergory M Fluid Service M300 General Statements • Chapter IX High Pressure

Piping K300 General Statements • Chapter X High Purity

Piping U300 General Statements

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Contenido

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions • Chapter II Design • Chapter III Materials • Chapter IV Dimensional

Requirements • Chapter V Construction,

Welding, and Assembly • Chapter VI Inspection

and Testing • Chapter VII Operation

and Maintenance Procedures

• Chapter VIII Corrosion Control

• Chapter IX Offshore Liquid Pipeline Systems

A400 General Statements • Chapter X Carbon Dioxide

Pipeline Systems B400 General Statements • Chapter XI Slurry Pipeline

Systems C400 General Statements

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions • Chapter I Materials and

Equipment • Chapter II Welding • Chapter III Piping System

Components and Fabrication Details

• Chapter IV Design, Installation, and Testing

• Chapter V Operating and Maintenance Procedures

• Chapter VI Corrosion Control

• Chapter VII Intentionally Left Blank

• Chapter VIII Offshore Gas Transmission

A800 Offshore Gas Transmission • Chapter IX Sour Gas

Service B800 Sour Gas Service

19

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Definitions

20

PROCESS PIPING

• Chapter I Scope and Definitions

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Definitions

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Chapter I Scope and

Definitions

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• General Provisions and

Definitions

21

PROCESS PIPING 1.- Introducción

2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Definitions

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

22

PROCESS PIPING 1.- Introducción

2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Definitions

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

23

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Definitions

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

PROCESS PIPING

24

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Definitions

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

PROCESS PIPING

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

25

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Definitions

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

PROCESS PIPING

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

26

27

PROCESS PIPING

• Conditions and Criteria 1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES • Loads

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

• Design, Installation, and

Testing

28

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

29

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

30

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

31

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

32

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

renebecerramatias@yahoo.com

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

33

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

34

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

35

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

36

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

37

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

38

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

39

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

40

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

41

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

42

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

43

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

44

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing .

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

45

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

46

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

47

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

48

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Design

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

49

50

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Materials

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

51

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Materials

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

52

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Materials

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

53

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Materials

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

54

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Materials

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

55

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Components

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

56

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Components

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

57

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Components

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

58

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Fabrication

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

59

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Fabrication

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

60

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Fabrication

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

61

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Fabrication

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

62

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Fabrication

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

63

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Testing

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

64

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Testing

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

65

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Testing

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

66

PROCESS PIPING

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Testing

PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES

GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

67

1.- Introducción 2.- Sistemas de Cañerías 3.- Contenido 4.- Definitions 5.- Design 6.- Materials 7.- Components 8.- Fabrication 9.- Testing

Bibliografía.

68