Post on 13-Feb-2019
DCM230Docking Entertainment System
Cadastre seu produto e obtenha suporte em
Registre su producto y obtenga asistencia en
www.philips.com/welcomeUser manual
pg001-027_DCM230_BK-Eng 8/6/08, 11:481
2
AVISO IMPORTANTEPhilips Mexicana, S.A. de C.V. no se hace
responsable por daños o desperfectos causados por:– Maltrato, descuido o mal uso, presencia de
insectos o roedores (cucarachas, ratones etc.).– Cuando el aparato no haya sido operarado
de acuerdo con el instructivo del uso, fuera de los valores nominales y tolerancias de lastensiones (voltaje), frecuencia (ciclaje) dealimentación eléctrica y las características que deben reunir las instalaciones auxiliares.
– Por fenómenos naturales tales como:temblores, inundaciones, incendios, descargaseléctricas, rayos etc. o delitos causados porterceros (choques asaltos, riñas, etc.).
MéxicoEs necesario que lea cuidadosamente su instructivo demanejo.
No abrir, riesgo de choque eléctrico
Verifique que el voltaje de alimentaciónsea el requerido para su aparato
ATENCIÓN
Para evitar el riesgo de choque eléctrico, no quite la tapa.En caso de requerir servicio, dirijase al personal calificado.
PRECAUCIÓN - ADVERTENCIA
Descripción: Minisistema de AudioModelo : DCM230/ 55Alimentación: 100–240V~; 50/60 HzConsumo: 30 WImportador : Philips Mexicana, S.A. de C.V.Domicilio: Av. La Palma No.6
Col. San Fernando La HerraduraHuixquilucan
Localidad y Tel: Edo. de México C.P. 52784Tel.52 69 90 00
Exportador: Philips Electronics HK, Ltd.País de Origen: ChinaNº de Serie: ______________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVOANTES DE USAR SU APARATO.
pg001-027_DCM230_BK-Eng 8/6/08, 11:482
3
1
2
6
3
50
0
8£*
&
7
4
#
⁄ºª
$
TIMER
#
^3
(
(
@
)
5
£&
¡™
≤
9
8
§
∞
!
≥
•
@
¤
%
$
1iPod
pg001-027_DCM230_BK-Eng 8/6/08, 11:483
4
CAUTIONUse of controls or adjustments orperformance of procedures other thanherein may result in hazardousradiation exposure or other unsafeoperation.
pg001-027_DCM230_BK-Eng 8/6/08, 11:484
5
En
glis
h
Index
English ------------------------------------------------ 6
pg001-027_DCM230_BK-Eng 8/6/08, 11:485
6
En
glish
Contents
General InformationEnvironmental Information ................................ 7Supplied accessories ............................................ 7Safety Information ................................................ 7Hearing Safety ....................................................... 8
PreparationsRear connections ................................................. 9
Connecting a USB device or memory ................. 10card .............................................................................. 10Connecting other equipment to your ................. 10system ......................................................................... 10
Before using the remote control .................... 11Replacing battery (lithium CR2025) into theremote control ................................................... 11
ControlsControls on the system and remote control ................................................................................... 12
Basic FunctionsSwitching the system on ................................... 14Switching the system to Eco Power Standbymode ..................................................................... 14Power Saving Automatic Standby .................... 14Adjusting volume and sound ............................ 14
CD/MP3-CD OperationLoading a disc ...................................................... 15Basic playback controls ..................................... 15Playing an MP3 disc ............................................ 16Different play modes: SHUFFLE and REPEAT17Programming track numbers ........................... 17Erasing the program .......................................... 17
Radio ReceptionTuning to radio stations .................................... 18Programming radio stations ............................. 18
Automatic programming ......................................... 18Manual programming ............................................... 18
Tuning to preset radio stations ....................... 19RDS ....................................................................... 19
Setting the RDS clock .............................................. 19
External SourcesUsing a non-USB device .................................... 20Using a USB mass storage device ................... 20
Clock/TimerClock setting ....................................................... 22Timer setting ....................................................... 22
Activating and deactivating timer .......................... 22Sleep timer setting ............................................. 23
iPod DockCompatible iPod players ................................... 24Selecting the correct dock adaptor ............... 24Setup ..................................................................... 24Playing an iPod portable player ....................... 24Charging iPod battery using the dock ........... 24
Specifications ........................................... 25
Maintenance .............................................. 25
Troubleshooting ............................. 26~27
pg001-027_DCM230_BK-Eng 8/6/08, 11:486
En
glis
h
7
General Information
Congratulations on your purchase andwelcome to Philips!
To fully benefit from the support that Philipsoffers, register your product atwww.philips.com/welcome.
Environmental InformationAll unnecessary packaging has been omitted. Wehave tried to make the packaging easy toseparate into three materials: cardboard (box),polystyrene foam (buffer) and polyethylene (bags,protective foam sheet).
Your system consists of materials which can berecycled and reused if disassembled by aspecialized company. Please observe the localregulations regarding the disposal of packagingmaterials, exhausted batteries and oldequipment.
Supplied accessories– remote control (with battery)– FM antenna– MW antenna– 4 X iPod dock adaptors– 1 X certified AC/DC adapter
Safety Information Before operating the system, check that the
operating voltage indicated on the typeplate ofyour system is identical with the voltage of yourlocal power supply. If not, please consult yourdealer.
Place the system on a flat, hard and stablesurface.
Place the system in a location with adequateventilation to prevent internal heat build-up inyour system. Allow at least 10 cm (4 inches)clearance from the rear and the top of the unitand 5 cm (2 inches) from each side.
The ventilation should not be impeded bycovering the ventilation openings with items,such as newspapers, table-cloths, curtains, etc.
Do not expose the system, batteries or discs toexcessive moisture, rain, sand or heat sourcescaused by heating equipment or direct sunlight.
No naked flame sources, such as lighted candles,should be placed on the apparatus.
No objects filled with liquids, such as vases, shallbe placed on the apparatus.
Install this unit near the AC outlet and where theAC power plug can be reached easily.
The apparatus shall not be exposed to drippingor splashing.
If the system is brought directly from a cold to awarm location, or is placed in a very damp room,moisture may condense on the lens of the discunit inside the system. Should this occur, the CDplayer would not operate normally. Leave thepower on for about one hour with no disc in thesystem until normal playback is possible.
The mechanical parts of the set contain self-lubricating bearings and must not be oiled orlubricated.
When the system is switched to Standbymode, it is still consuming some power.
To disconnect the system from thepower supply completely, remove the ACpower plug from the wall socket.
pg001-027_DCM230_BK-Eng 8/6/08, 11:487
8
En
glish
General Information
Hearing SafetyListen at a moderate volume.
Using headphones at a high volume can impairyour hearing. This product can produce soundsin decibel ranges that may cause hearing loss fora normal person, even for exposure less than aminute. The higher decibel ranges are offeredfor those that may have already experiencedsome hearing loss.
Sound can be deceiving. Over time your hearing"comfort level" adapts to higher volumes ofsound. So after prolonged listening, what sounds"normal" can actually be loud and harmful toyour hearing. To guard against this, set yourvolume to a safe level before your hearingadapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can hear itcomfortably and clearly, without distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even at normally"safe" levels, can also cause hearing loss.
Be sure to use your equipment reasonably andtake appropriate breaks.
Be sure to observe the followingguidelines when using your headphones.
Listen at reasonable volumes for reasonableperiods of time.
Be careful not to adjust the volume as yourhearing adapts.
Do not turn up the volume so high that youcan't hear what's around you.
You should use caution or temporarilydiscontinue use in potentially hazardoussituations.
Do not use headphones while operating amotorized vehicle, cycling, skateboarding, etc.; itmay create a traffic hazard and is illegal in manyareas.
pg001-027_DCM230_BK-Eng 8/6/08, 11:488
En
glis
h
9
Preparations
Rear connections
The type plate is located at the rear of thesystem.For users in the U.K.: please follow theinstructions on page 2.
A Power
Before connecting the AC power adaptor to thewall outlet, ensure that all other connectionshave been made.
WARNING!– For optimal performance, use only theoriginal AC power adaptor.– Never make or change connections withthe power switched on.
To avoid overheating of the system, a safetycircuit has been built in. Therefore, yoursystem may switch to Standby modeautomatically under extreme conditions. Ifthis happens, let the system cool downbefore reusing it (not available for all versions).
B Antennas Connection
Connect the supplied MW loop antenna and FMantenna to the respective terminals. Adjust theposition of the antenna for optimal reception.
MW Antenna
Position the antenna as far as possible from a TV,VCR or other radiation source.
AC power adaptor
MW loop antenna
FM wire antenna
pg001-027_DCM230_BK-Eng 8/6/08, 13:229
10
En
glish
Preparations
FM Antenna
For better FM stereo reception, connect anoutdoor FM antenna to the FM AERIAL (FMANTENNA) terminal.
C Optional connectionThe optional equipment and connecting cords arenot supplied. Refer to the operating instructionsof the connected equipment for details.
Connecting a USB device or memorycard
By connecting a USB mass storage device(including USB flash memory, USB flash playersor memory cards) to the Hi-Fi system, you canenjoy the device's stored music through thepowerful speakers of Hi-Fi system.
Insert the USB device's USB plug into the socket on the set.
ORfor the devices with USB cables:
1 Insert one plug of the USB cable (not supplied)to the socket on the set.
2 Insert the other plug of the USB cable to theUSB output terminal of the USB device.
OR
for the memory card:1 Insert the memory card into a card reader (not
supplied).
2 Use a USB cable (not supplied) to connect thecard reader into the socket on the set.
Connecting other equipment to yoursystem
Use a cinch cable to connect AUX to theanalogue audio out terminals of an externalequipment (TV, VCR, Laser Disc player, DVDplayer or CD Recorder).
Note:– If you are connecting equipment with a monooutput (a single audio out terminal), connect it tothe AUX left terminal. Alternatively, you can use a“single to double” cinch cable (the output soundstill remain mono).
pg001-027_DCM230_BK-Eng 8/6/08, 11:4810
En
glis
h
11
Before using the remote control
1 Pull out the plastic protective sheet.
2 Select the source you wish to control bypressing one of the source select keys on theremote control (for example DISC, FM).
3 Then select the desired function (for exampleÉÅ , à , á).
Remove the plastic protective sheet
Replacing battery (lithiumCR2025) into the remote control
1 Press the slot on the battery compartment.
2 Pull out the battery compartment.
3 Replace a new battery and fully insert thebattery compartment back to the originalposition.
1
2
3
CR2025
CAUTION!Batteries contain chemical substances, sothey should be disposed of properly.
Preparations
pg001-027_DCM230_BK-Eng 8/6/08, 11:4811
12
En
glish
Controls (illustrations on page 3)
Controls on the system andremote control
1 STANDBY-ON/ECO POWERB– switches the system on or to Eco Power
standby/normal standby with clock display.
2 Display screen– shows the status of the system.
3 EJECT 0– ejects a disc from the disc loader.
4 IR SENSOR– remote sensor
5 VOLUME -/+ (VOL +/-)– adjusts the volume level.
6 Disc loader
7 S/Tfor CD/MP3-CD/USB
fast searches back and forwardwithin a track/disc (press andhold).
................................. skips to the beginning of acurrent/previous/subsequenttrack.
8 STOP 9– stops disc playback or erases a disc program.
9 ÉÅ
– starts or interrupts playback.
0 ALBUM/PRESET +/-– (for MP3-CD/USB) skips to the beginning of a
current/previous/subsequent album.– adjusts the hours and minutes for the clock/timer
function.– selects a preset radio station.
! 5 /6for CD/MP3-CD/USB
fast searches back and forwardwithin a track/disc (press andhold).
for TUNER ........ tunes to radio stations (down/up).
@ ¡ / ™
for CD/MP3-CD/USB................................. skips to the beginning of a
current/previous/subsequenttrack.
# SOURCE– selects the respective sound source for CD/USB/
iPod/TUNER (FM/MW)/AUX.$ PROG– (for CD/MP3/USB) programs tracks.– (for TUNER) programs radio stations.– sets the clock function.
% REPEATfor CD/MP3/USB selects a repeat playback
mode.
^ SHUFFLE– plays disc/USB tracks randomly.
& TIMER– sets the timer function.
* PLAY•MODE– selects various repeat modes or the shuffle play
mode for a disc.
( 3 / 4– (for MP3-CD/USB) skips to the beginning of a
current/previous/subsequent album.
) MUTE– interrupts and resumes sound production.
¡ DSC (Digital Sound Control)– selects sound characteristics: ROCK/POP/JAZZ/
CLASSIC.
™ DBB (Dynamic Bass Boost)– enhances the bass.
£ DISPLAY– selects different disc information display modes
during playback.
≤ RDS– for TUNER, displays RDS information.
∞ SLEEP– selects the sleeper time.
pg001-027_DCM230_BK-Eng 8/6/08, 11:4812
En
glis
h
13
Controls
§ MENU– equivalent to the MENU button on your iPod
player.
≥ Numerical Keypad (0~9)– (for CD/MP3/USB) selects a track directly.
• BAND– For tuner (TUNER): press to switch between
MW and FM.
ª iPod dock– is used to dock your iPod player for playback or
recharging through this system.
º AUX– is the jack used to connect an auxiliary device.
⁄ USB DIRECT – jack for the external USB mass storage device.
¤ OK– confirms a selection (for iPod menu operation
only).
Notes for remote control:– First select the source you wish to controlby pressing one of the source select keys onthe remote control (for example CD, FM).– Then select the desired function (forexample ÉÅ, à , á).
pg001-027_DCM230_BK-Eng 8/6/08, 11:4813
14
En
glish
Basic Functions
Important!Before you operate the system, completethe preparation procedures.
Switching the system on
Press STANDBY-ON/ECO POWER B (orB on the remote). The system will switch to the last selectedsource.
Press SOURCE on the top of the system orCD, USB, iPod, TUNER or AUX on theremote control. The system will switch to the selected source.
Switching the system to standbymode
Press STANDBY-ON/ECO POWER B (orB on the remote). The backlight for clock display is dim in standby. The volume level (up to a maximum volumelevel of 12), interactive sound settings, lastselected mode (ECO Power Standby or normalstandby), source and tuner presets will beretained in the player's memory.
Switching the system to EcoPower Standby mode
Press and hold STANDBY-ON/ECOPOWER B (or B on the remote) for morethan 2 seconds. The backlight will go blank.
Power Saving Automatic StandbyAs a power-saving feature, the systemautomatically switches to Eco Power/ Standby 15minutes after a CD/MP3/USB has reached theend and no control is operated.
Adjusting volume and sound
1 Press VOLUME +/- (or VOL +/- on the remotecontrol) to decrease or increase the volume. Display shows the volume level VOL and anumber from MIN 01, 02, ...31 MAX.
2 Press DSC repeatedly to select the desiredsound effect: ROCK/POP/JAZZ/CLASSIC.
3 Press DBB to switch bass enhancement on or off. If the DBB is activated, DBB ON is shown. If the DBB is deactivated, DBB OFF is shown.
4 Press MUTE on the remote control tointerrupt sound reproduction instantly. Playback will continue without sound and --MUTE-- will flash on the display.
To activate sound reproduction you can:– press MUTE again;– adjust the volume controls;– change source.
To listen through the headphone Connect the headphone plug to the n socket
on the rear of the set. The speakers will be muted.
TIMER
iPod
pg001-027_DCM230_BK-Eng 8/6/08, 11:4814
En
glis
h
15
Basic playback controls
To play a disc
Press ÉÅ to start playback. The current track number and elapsedplaying time of the track are displayed duringdisc playback.
To select a different track
Press S/T (or ¡ / ™ on the remotecontrol) once or repeatedly until the desiredtrack number appears in the display.
You can also use the Numerical Keypad(0~9) on the remote to select a track directly.
If you have selected a track number shortly afterloading a disc or in the PAUSE position, you willneed to press ÉÅ to start playback.
Text display during playback
In CD mode
Press DISPLAY repeatedly to see thefollowing information. Track number and elapsed playback time ofcurrent track. Track number and total elapsed playbacktime. Track number and remaining playback timeof current track. Track number and total remaining playbacktime. Clock time.
In MP3-CD mode
Press DISPLAY to display the ID-3information if available and the clock time.
Important!The lens of the CD player should never betouched.
Loading a discThis CD player plays Audio Discs including CDRecordables, CD-Rewritables and MP3 CD.
CD-ROM, CD-I, CDV, VCD, DVD or computerCDs, however, are not possible.
1 Press SOURCE on the top of the system toselect CD or press CD on the remote.
2 Insert a disc into the disc loader.. Make sure the label side is facing up. Make sure you have removed any other discfrom the slot loader.
3 Press ÉÅ to start playback.4 At any time, simply press 9 to stop playback.
CD/MP3-CD Operation
TIMER
iPod
pg001-027_DCM230_BK-Eng 8/6/08, 11:4815
16
En
glish
CD/MP3-CD Operation
To find a passage within a track
1 Press and hold S/T (or 5 /6 on theremote control).
2 When you recognize the passage you want,
release S/T (or 5 /6 on the remotecontrol). Normal playback continues.
To stop playback
Press 9.
To interrupt playback
Press ÉÅ during playback. The display freezes and the elapsed playingtime flashes when playback is interrupted. To resume, press ÉÅ again.
Notes:CD play will also stop when;– you eject the disc.– the disc has reached the end.– you select another source: TUNER, USB, DOCKor AUX.– you select standby.– the set auto off time expires.
Playing an MP3 disc
1 Load an MP3 disc. The disc reading time may exceed 10seconds due to the large number of songscompiled into one disc.
2 Press ALBUM/PRESET +/- (or 3 / 4 on theremote control) to select a desired album.
3 Press S/T (or ¡ /™ on the remotecontrol) to select a desired track. The album number will change accordingly asyou reach the first track of an album by pressingS (¡ on the remote) or the last track of analbum by pressing T (™ on the remote).
4 Press ÉÅ to start playback.
Supported MP3 disc formats:– ISO9660, Joliet– Maximum title number: 999 (depending onfilename length)– Maximum album number: 99– Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz– Supported Bit-rates: 32~256 (kbps), variable
bitrates
pg001-027_DCM230_BK-Eng 8/6/08, 11:4816
En
glis
h
17
CD/MP3-CD Operation
Different play modes: SHUFFLEand REPEATYou can select and change the various playmodes before or during playback. The REPEATmodes can also be combined with PROGRAM.
1 To select your play mode, press PLAY•MODE(SHUFFLE or REPEAT on the remotecontrol) before or during playback until thedisplay shows the desired function. appears if the shuffle playback is activatedand disappears if deactivated. If appears, it indicates to play the currenttrack repeatedly. If ALL is displayed, it indicates to play alltracks in the whole disc repeatedly. For an MP3 CD, if both and ALB flashon the display panel, it indicates to play thecurrent album repeatedly.
2 Press ÉÅ to start playback if in the STOPposition. If you have selected SHUFFLE, playback startsautomatically.
3 To return to normal playback, press thePLAY•MODE (SHUFFLE or REPEAT onthe remote control) until or is nolonger displayed.
You can also press 9 to stop playback andcancel your play mode.
Note:– The Repeat and Shuffle functions cannot beactivated simultaneously.
Programming track numbersProgram in the STOP position to select andstore your disc tracks in the desired sequence. Ifyou like, store any track more than once. Up to40 tracks can be stored in the memory.
1 Press PROG to enter the programming mode. A track number flashes.
2 Press S/T (or ¡ / ™ on the remotecontrol) to select your desired track number.
For an MP3 CD, Press ALBUM/PRESET +/-(or ¡ / ™ on the remote control) to select adesired album number.
3 Press PROG to confirm the track number to bestored. PR X displays, in which X denotes the nextprogram number to be stored.
4 Repeat steps 2-3 to select and store all desiredtracks. PROGRAM FULL appears if you attempt toprogram more than 40 tracks.
5 Press 9 to finish programming. PROG displays on the screen.
6 To start playback of your disc program, pressÉÅ directly.
Erasing the programYou can erase the program by:
pressing 9 once in the STOP mode;
pressing 9 twice during playback; PROG disappears.
ejecting the current disc;
pg001-027_DCM230_BK-Eng 8/6/08, 11:4817
18
En
glish
Radio Reception
Tuning to radio stations
1 Press SOURCE repeatedly (or TUNER on theremote control) to select the tuner source.
2 Press BAND on the remote control to selectthe desired waveband : FM or MW.
3 Hold S/T (or 5 /6 on the remotecontrol) and then release the button. The system will start searching for a radiostation with sufficient signal strength.
4 Repeat step 3 if necessary until you find thedesired station.
To tune to a weak station, press S/T (or
5 /6 on the remote control) briefly andrepeatedly until you have found optimalreception.
Programming radio stationsYou can store up to a total of 20 radio stationsfor each band in the memory.
Automatic programming
Automatic programming will start with a chosenpreset number. From this preset numberupwards, former programmed radio stations willbe overridden.
1 Press ALBUM/PRESET +/- (or ¡ / ™ on theremote control) to select the preset numberwhere programming should start.
Note:– If no preset number is selected, default is preset(1) and all your presets will be overridden.
2 Press PROG for more than two seconds toactivate programming. All available stations are programmed.
Manual programming
1 Tune to your desired station (refer to “Tuning toradio stations”).
2 Press PROG to activate programming. PROG flashes in the display.
3 Press ALBUM/PRESET +/- (or ¡ / ™ on theremote control) to allocate a number from 1 to20 to this station.
4 Press PROG again to confirm the setting. PROG disappears, the preset number andthe frequency of the preset station are shown.
5 Repeat the above four steps to store otherstations.
You can override a preset station by storinganother frequency in its place.
TIMER
iPod
pg001-027_DCM230_BK-Eng 8/6/08, 11:4818
En
glis
h
19
Tuning to preset radio stations
Press ALBUM/PRESET +/- (or 3 / 4 on theremote control) until the desired preset stationis displayed.
RDSRadio Data System is a service that allowsFM stations to show additional information. Ifyou are receiving a RDS station, and thestation name are displayed.When automatic programming is used, RDSstations will be programmed first.
Scrolling through different RDSinformation
Press RDS on the remote control briefly andrepeatedly to scroll through the followinginformation (if available):– Station name– Radio text messages– Program type– Frequency
Radio Reception
pg001-027_DCM230_BK-Eng 8/6/08, 11:4819
20
En
glish
External Sources
Using a non-USB device1 Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVDplayer or CD Recorder) to the AUX terminals ofyour system.
2 Press SOURCE repeatedly (or AUX on theremote control) to select external equipment.
Note:– All the sound control features (DSC or DBB, forexample) are available for selection.– Refer to the operating instructions for theconnected equipment for details.
Using a USB mass storage device
By connecting a USB mass storage device to theHi-Fi system, you can enjoy the device's storedmusic through the powerful speakers of Hi-Fisystem.
Playing a USB mass storage deviceCompatible USB mass storage devicesWith the Hi-Fi system, you can use:– USB flash memory (USB 2.0 or USB1.1)– USB flash players (USB 2.0 or USB1.1)– memory cards (requires an additional card
reader to work with this Hi-Fi system)
Notes:– In some USB flash players (or memory devices),the stored contents are recorded using copyrightprotection technology. Such protected contents willbe unplayable on any other devices (such as thisHi-Fi system).– Compatibility of the USB connection on thisproduct:a) This product supports most USB Mass storagedevices (MSD) that are compliant to the USBMSD standards.
i) Most common Mass storage class devices areflash drives, memory sticks, jump drives and etc.ii) If you see a "Disc Drive" show up on yourcomputer after you plugged the mass storagedevice into your computer, most likely it is MSDcompliant and it will work with this product.
b) If your Mass storage device required a battery/power source. Please make sure you have a freshbattery in it or charge the USB device first andthen plug it into the product again.
– Supported Music type:a) This device only supports unprotected musicwith the following file extension:.mp3.wmab) Music bought from on-line music stores are notsupported because they are secured by DigitalRights Management protection (DRM).c) File name extensions that end with thefollowing are not supported:.wav; .m4a; .m4p; mp4; .aac and etc.
– No Direct connection can be made fromComputer USB port to the product even you haveeither or both mp3 or wma files in your computer.
Supported formats:– USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 bytes)– MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate– WMA v9 or earlier– Directory nesting up to a maximum of 8
levels– Number of albums/ folders: maximum 99– Number of tracks/titles: maximum 400– ID3 tag v2.0 or later– File name in Unicode UTF8 (maximum length:
128 bytes)
The system will not play or support thefollowing:– Empty albums: an empty album is an album
that does not contain MP3/WMA files, andwill not be shown in the display.
– Non-supported file formats are skipped. Thismeans that e.g.: Word documents .doc orMP3 files with extension .dlf are ignored andwill not be played.
– AAC, WAV, PCM audio files– DRM protected WMA files– WMA files in Lossless format
pg001-027_DCM230_BK-Eng 8/6/08, 11:4820
En
glis
h
21
External Sources
How to transfer music files from PC to aUSB mass storage device
By dragging and dropping music files, you caneasily transfer your favorite music from PC to aUSB mass storage device.For the flash player, you can also use its musicmanagement software for the music transfer.However, those WMA files may beunplayable for compatibility reasons.
How to organize your MP3/WMA files onthe USB mass storage deviceThis Hi-Fi system will browse the MP3/WMAfiles in the folders/sub-folders/titles order.Example:
Root
Title 001 Title 002 Title 003
Album 01
Title 001 Title 002
Title 003
Album 02
Title 001 Title 002 Title 003 Album 03
Title 001 Title 002 Title 003
Organize your MP3/WMA files in differentfolders or subfolders as required.
Notes:– If you have not organized MP3/WMA files intoany albums on your disc, an album "01" will beautomatically assigned for all those files.– Make sure that the file names of MP3 files endwith .mp3. and the file names of WMA files endwith .wma.– For DRM protected WMA files, use WindowsMedia Player 10 (or later) for conversion. Visitwww.microsoft.com for details about WindowsMedia Player and WM DRM (Windows MediaDigital Rights Management).
1 Check the USB device has been properlyconnected. (See Installation: Connecting anadditional appliance).
2 Press SOURCE (USB on the remote) once ormore to select USB.– NO FILE appears if no audio file is found inthe USB device.
3 Play the USB's audio files as you do with thealbums/tracks on a CD (See CD/MP3Operations).
Notes:– For compatibility reasons, the album/trackinformation may differ from what it is displayedthrough flash players' music management software.– File names or ID3 tags will be displayed as --- ifthey are not in English.
pg001-027_DCM230_BK-Eng 8/6/08, 11:4821
22
En
glish
Clock/Timer
Clock settingThe clock can be set in either 12-hour or24-hour mode (12HR or 24HR for example).
1 In standby mode, press PROG. SET CLOCK is displayed briefly. Then, 12HRor 24HR is displayed.
2 Press ALBUM/PRESET +/- (or ¡ / ™ on theremote control) to select clock mode. The clock digits for the hours continue toflash.
3 Press ALBUM/PRESET +/- (or ¡ / ™ on theremote control) to set the hours.
4 Press PROG again. The clock digits for the minutes flash.
5 Press ALBUM/PRESET +/- (or ¡ / ™ on theremote control) to set the minutes.
6 Press PROG to confirm the time.
Timer setting The system can be used as an alarm clock,
whereby the CD, TUNER, USB or DOCK isswitched on at a set time (one time operation).The clock time needs to be set first before thetimer can be used.
During setting, if no button is pressed within 90seconds, the system will exit timer setting modeautomatically.
1 Press TIMER for more than two seconds.
2 Press SOURCE repeatedly to select the soundsource. “SET TIMER” and “SELECT SOURCE” aredisplayed.
3 Press TIMER to confirm your desired mode. The clock digits for the hours flash.
4 Press ALBUM/PRESET +/- (or ¡ / ™ on theremote control) to set the hours.
5 Press TIMER again. The clock digits for the minutes flash.
6 Press ALBUM/PRESET +/- (or ¡ / ™ on theremote control) to set the minutes.
7 Press TIMER to confirm the time. The timer is now set and activated.
Activating and deactivating timer
In standby or during playback, press TIMERonce on the remote control. Display shows if activated, and disappears ifdeactivated.
TIMER
iPod
pg001-027_DCM230_BK-Eng 8/6/08, 11:4822
En
glis
h
23
Sleep timer settingThe sleep timer enables the system to switch offby itself after a set period of time.
1 Press SLEEP on the remote control repeatedlyto select a preset time. The selections are as follows (time inminutes):OFF ™ 90 ™ 75 ™ 60 ™ 45 ™ 30 ™ 15 ™OFF ™ 90 …
"SLEEP XX" is displayed. "XX" is the time inminutes. is displayed if the sleep time you haveselected is not OFF.
2 When you reach the desired length of time, stoppressing the SLEEP button.
To deactivate the sleep timer Press SLEEP repeatedly until "0FF" is displayed,
or press ECO POWER/STANDBY ON 2.
Clock/Timer
pg001-027_DCM230_BK-Eng 8/6/08, 11:4823
24
En
glish
iPod Dock
Compatible iPod players Most Apple iPod models with 30-pin dock
connectors as follows:Nano 1st /2nd/3rd generation, iPod 5thgeneration (video), iPod touch and iPod classic.
Selecting the correct dockadaptor
4 iPod dock adaptors of different type, asindicated at the back of the adaptor, are includedto fit the following iPod:Nano 1st /2nd/3rd generation, iPod 5thgeneration (video), iPod touch and iPod classic.
Setup
Insert a dock adapter corresponding to theportable player you use.
2
11
To connect with a different iPod portable player,pop up the corresponding dock adapter andreplace with a new one of the matching type.
Playing an iPod portable player1 Correctly dock your iPod portable player in the
cradle. Make sure the dock adaptor iscompatible.
Make sure that you have powered on your iPodplayer before selecting DOCK source. On the display, "iPod" is displayed if iPod isconnected.
2 Press SOURCE on the system repeatedly oriPod on the remote control to select iPodsource.
3 Playback starts automatically. You can selectavailable features (such as play/pause, skip track,fast forward/backward, menu selection) duringplayback.
Charging iPod battery using thedock
In DOCK mode, directly dock your iPodportable player on the cradle for charging.
Note:– For the purpose of SAVING POWER, rechargingof your iPod or USB device is NOT SUPPORTEDwhen the main set is in the STANDBY MODE.
pg001-027_DCM230_BK-Eng 8/6/08, 11:4824
En
glis
h
25
Cleaning the Cabinet
Use a soft cloth slightly moistened with a milddetergent solution. Do not use a solutioncontaining alcohol, spirits, ammonia or abrasives.
Cleaning Discs
When a disc becomes dirty,clean it with a cleaning cloth.Wipe the disc from the centreout.
Do not use solvents such asbenzene, thinner, commerciallyavailable cleaners, or antistatic spray intended foranalogue records.
Cleaning the disc lens
After prolonged use, dirt or dust mayaccumulate at the disc lens. To ensure goodplayback quality, clean the disc lens with PhilipsCD Lens Cleaner or any commercially availablecleaner. Follow the instructions supplied withcleaner.
Maintenance
Specifications
AMPLIFIEROutput power ....................................... 2 x 15 W RMSSignal-to-noise ratio ....................................... ≥ 70 dBAFrequency response ...... 20 Hz – 20 KHz, ± 3 dBInput sensitivity AUX ....................... 0.5 V (max. 2 V)Impedance loudspeakers ......................................... 4 ΩImpedance headphones ........................................ 32 ΩOutput power headphones ....................... <50 mW
CD PLAYERFrequency range ................................ 20 Hz – 20 kHzSignal-to-noise ratio ............................................ 70 dBA
TUNERFM wave range ................................... 87.5 – 108 MHzSensitivity at 75 Ω– FM ................................................................................ 20dBfSelectivity ................................................................. ≥ 25 dBTotal harmonic distortion ..................................... ≤ 1%Frequency response– FM .............................................................. 63 – 6000 HzSignal-to-noise-ratio– FM ....................................................................... ≥ 50 dBA
USB PLAYERUSB ................................................................... 12Mb/s, V1.1......................................... support MP3 and WMA filesNumber of albums/folders ................. maximum 99Number of tracks/titles ...................... maximum 400
GENERAL INFORMATIONAC Power ............................. 100 – 240 V / 50-60 HzDimensions (w x h x d) . 206 x 141 x 390 (mm)Weight ....................................................................... 2.33 kgStandby power consumption ............................ <7 WEco power standby ................................................. <1 W
Specifications and external appearance aresubject to change without notice.
pg001-027_DCM230_BK-Eng 8/6/08, 11:4825
26
En
glish
Troubleshooting
WARNINGUnder no circumstances should you try to repair the system yourself, as this will invalidate thewarranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If youare unable to remedy a problem by following these hints, consult your dealer or Philips forhelp.
“PLEASE INSERT CD/MP3 DISC” isdisplayed.
Radio reception is poor.
The system does not react when buttonsare pressed.
Sound cannot be heard or is of poorquality.
The remote control does not functionproperly.
The timer is not working.
The Clock/Timer setting is erased.
Insert a disc. Check if the disc is inserted upside down. Wait until the moisture condensation at the lens
has cleared. Replace or clean the disc, see “Maintenance”. Use a finalised CD-RW or correct format disc.
If the signal is too weak, adjust the antenna orconnect an external antenna for betterreception.
Increase the distance between the Micro HiFiSystem and your TV or VCR.
Remove and reconnect the AC power plug andswitch on the system again.
Adjust the volume. Disconnect the headphone.
Select the source (CD or TUNER, for example)before pressing the function button (ÉÅ, 5 /6).
Reduce the distance between the remotecontrol and the system.
Insert the battery with its polarities(+/– signs) aligned as indicated.
Replace the battery. Point the remote control directly toward
IR sensor on the front of the system.
Set the clock correctly. Switch on the timer.
Power has been interrupted or the power cordhas been disconnected. Reset the clock/timer.
Problem Solution
pg001-027_DCM230_BK-Eng 8/6/08, 11:4826
En
glis
h
27
Troubleshooting
Some files on the USB device are notdisplayed.
“DEVICE NOT SUPPORTED” scrolls on thedisplay.
Check if the number of folders exceeds 99 orthe number of titles exceeds 400.
Remove the USB mass storage device or selectanother source.
Problem Solution
pg001-027_DCM230_BK-Eng 8/6/08, 11:4827