CAPITULO 3-4

download CAPITULO 3-4

of 67

Transcript of CAPITULO 3-4

  • 5/26/2018 CAPITULO 3-4

    1/67

    CAPITULO 3

    Actividad PT 3.2.3: Investigacin de los enlaces troncales de la VLAN

    Qu interfaces estn configuradas actualmente en el enlace troncal?

    interface FastEthernet0/1

    switchport trunk native vlan 99

    switchport mode trunk

    !

    interface FastEthernet0/3

    switchport trunk native vlan 99

    switchport mode trunk

  • 5/26/2018 CAPITULO 3-4

    2/67

    Actividad PT 3.3.4: Configuracin de las VLAN y de los enlaces troncales

    S1#show vlan

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16

    Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/21002 fddi-default act/unsup

    1003 token-ring-default act/unsup

    1004 fddinet-default act/unsup

    1005 trnet-default act/unsup

    VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

    ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

  • 5/26/2018 CAPITULO 3-4

    3/67

    1 enet 100001 1500 - - - - - 0 0

    1002 fddi 101002 1500 - - - - - 0 0

    1003 tr 101003 1500 - - - - - 0 0

    1004 fdnet 101004 1500 - - - ieee - 0 0

    1005 trnet 101005 1500 - - - ibm - 0 0

    Remote SPAN VLANs

    ------------------------------------------------------------------------------

    Primary Secondary Type Ports

    ------- --------- ----------------- ------------------------------------------

    S1#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    S1(config)#vlan 10

    S1(config-vlan)#name Faculty/Staff

    S1(config-vlan)#vlan 20

    S1(config-vlan)#name Students

    S1(config-vlan)#vlan 30

    S1(config-vlan)#name Guest(Default)

    S1(config-vlan)#vlan 99

    S1(config-vlan)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    S1(config-vlan)#name Management&Native

    S1(config-vlan)#end

    %SYS-5-CONFIG_I: Configured from console by console

    S1#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16

    Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    10 Faculty/Staff active

    20 Students active

    30 Guest(Default) active

    99 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

  • 5/26/2018 CAPITULO 3-4

    4/67

    1005 trnet-default active

    S2#config term

    Enter configuration commands, one per line. End with CNTL/Z.

    S2(config)#vlan 10

    S2(config-vlan)#name Faculty/StaffS2(config-vlan)#vlan 20

    S2(config-vlan)#name Students

    S2(config-vlan)#vlan 30

    S2(config-vlan)#name Guest(Default)

    S2(config-vlan)#vlan 99

    S2(config-vlan)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    S2(config-vlan)#name Management&Native

    S2(config-vlan)#end

    S2#

    %SYS-5-CONFIG_I: Configured from console by console

    S2#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    10 Faculty/Staff active

    20 Students active

    30 Guest(Default) active

    99 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S3(config)#vlan 10

    S3(config-vlan)#name Faculty/Staff

    S3(config-vlan)#vlan 20

    S3(config-vlan)#name Students

    S3(config-vlan)#vlan 30

  • 5/26/2018 CAPITULO 3-4

    5/67

    S3(config-vlan)#name Guest(Default)

    S3(config-vlan)#vlan 99

    S3(config-vlan)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    S3(config-vlan)#name Management&Native

    S3(config-vlan)#end

    S3#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16

    Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    10 Faculty/Staff active

    20 Students active

    30 Guest(Default) active

    99 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S2(config)#interface fa0/6

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 30

    S2(config-if)#interface fa0/11

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 10

    S2(config-if)#interface fa0/18

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 20

    S2(config-if)#end

    S2#

    %SYS-5-CONFIG_I: Configured from console by console

    S2#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

  • 5/26/2018 CAPITULO 3-4

    6/67

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/7, Fa0/8, Fa0/9

    Fa0/10, Fa0/12, Fa0/13, Fa0/14

    Fa0/15, Fa0/16, Fa0/17, Fa0/19

    Fa0/20, Fa0/21, Fa0/22, Fa0/23

    Fa0/24, Gig1/1, Gig1/210 Faculty/Staff active Fa0/11

    20 Students active Fa0/18

    30 Guest(Default) active Fa0/6

    99 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S3(config)#inter fa0/6

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 30

    S3(config-if)#inter fa0/11

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 10

    S3(config-if)#inter fa0/18

    S3(config-if)#switchport mode accessS3(config-if)#switchport access vlan 20

    S3(config-if)#end

    S3#

    %SYS-5-CONFIG_I: Configured from console by console

    S3#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/7, Fa0/8, Fa0/9

    Fa0/10, Fa0/12, Fa0/13, Fa0/14

    Fa0/15, Fa0/16, Fa0/17, Fa0/19

    Fa0/20, Fa0/21, Fa0/22, Fa0/23

    Fa0/24, Gig1/1, Gig1/2

    10 Faculty/Staff active Fa0/11

    20 Students active Fa0/18

  • 5/26/2018 CAPITULO 3-4

    7/67

    30 Guest(Default) active Fa0/6

    99 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S1(config)#inter fa0/1

    S1(config-if)#switchport mode trunk

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#inter fa0/3

    S1(config-if)#switchport mode trunk

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#end

    S2#show interface fa0/1 switchport

    Name: Fa0/1

    Switchport: Enabled

    Administrative Mode: dynamic auto

    Operational Mode: trunk

    Administrative Trunking Encapsulation: dot1q

    Operational Trunking Encapsulation: dot1q

    Negotiation of Trunking: On

    Access Mode VLAN: 1 (default)

    Trunking Native Mode VLAN: 1 (default)

    Voice VLAN: noneAdministrative private-vlan host-association: none

    Administrative private-vlan mapping: none

    Administrative private-vlan trunk native VLAN: none

    Administrative private-vlan trunk encapsulation: dot1q

    Administrative private-vlan trunk normal VLANs: none

    Administrative private-vlan trunk private VLANs: none

    Operational private-vlan: none

    Trunking VLANs Enabled: ALL

    Pruning VLANs Enabled: 2-1001

    Capture Mode Disabled

    Capture VLANs Allowed: ALL

    Protected: false

    S3#show inter fa0/3 switchport

    Name: Fa0/3

    Switchport: Enabled

    Administrative Mode: dynamic auto

  • 5/26/2018 CAPITULO 3-4

    8/67

    Operational Mode: trunk

    Administrative Trunking Encapsulation: dot1q

    Operational Trunking Encapsulation: dot1q

    Negotiation of Trunking: On

    Access Mode VLAN: 1 (default)

    Trunking Native Mode VLAN: 1 (default)Voice VLAN: none

    Administrative private-vlan host-association: none

    Administrative private-vlan mapping: none

    Administrative private-vlan trunk native VLAN: none

    Administrative private-vlan trunk encapsulation: dot1q

    Administrative private-vlan trunk normal VLANs: none

    Administrative private-vlan trunk private VLANs: none

    Operational private-vlan: none

    Trunking VLANs Enabled: ALL

    Pruning VLANs Enabled: 2-1001

    Capture Mode Disabled

    Capture VLANs Allowed: ALL

    Protected: false

  • 5/26/2018 CAPITULO 3-4

    9/67

    Actividad PT 3.5.1: Configuracin bsica de la VLAN

    S1(config)#vlan 99

    S1(config-vlan)#name Management&Native

    S1(config-vlan)#exit

    S1(config)#vlan 10S1(config-vlan)#name Faculty/Staff

    S1(config-vlan)#exit

    S1(config)#vlan 20

    S1(config-vlan)#name Students

    S1(config-vlan)#exit

    S1(config)#vlan 30

    S1(config-vlan)#name Guest(Default)

    S1(config-vlan)#exit

    S1(config)#end

    S1#

    %SYS-5-CONFIG_I: Configured from console by console

    S1#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

  • 5/26/2018 CAPITULO 3-4

    10/67

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16

    Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/210 Faculty/Staff active

    20 Students active

    30 Guest(Default) active

    99 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S2(config)#vlan 99

    S2(config-vlan)#name Management&Native

    S2(config-vlan)#exit

    S2(config)#vlan 10

    S2(config-vlan)#name Faculty/Staff

    S2(config-vlan)#exit

    S2(config)#vlan 20

    S2(config-vlan)#name Students

    S2(config-vlan)#exit

    S2(config)#vlan 30

    S2(config-vlan)#name Guest(Default)

    S2(config-vlan)#exitS2(config)#exit

    S2#

    %SYS-5-CONFIG_I: Configured from console by console

    S2#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16

    Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    10 Faculty/Staff active

    20 Students active

  • 5/26/2018 CAPITULO 3-4

    11/67

    30 Guest(Default) active

    99 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S3(config)#vlan 99

    S3(config-vlan)#name Management&Native

    S3(config-vlan)#exit

    S3(config)#vlan 10

    S3(config-vlan)#name Faculty/Staff

    S3(config-vlan)#exit

    S3(config)#vlan 20

    S3(config-vlan)#name Students

    S3(config-vlan)#exit

    S3(config)#vlan 30

    S3(config-vlan)#name Guest(Default)

    S3(config-vlan)#exit

    S3(config)#exit

    S3#

    %SYS-5-CONFIG_I: Configured from console by console

    S3#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16

    Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    10 Faculty/Staff active

    20 Students active

    30 Guest(Default) active

    99 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

  • 5/26/2018 CAPITULO 3-4

    12/67

    S2(config)#inter fa0/6

    S2(config-if)#switchport access vlan 30

    S2(config-if)#inter fa0/11

    S2(config-if)#switchport access vlan 10S2(config-if)#inter fa0/18

    S2(config-if)#switchport access vlan 20

    S2(config-if)#end

    S2#

    %SYS-5-CONFIG_I: Configured from console by console

    S2#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/7, Fa0/8, Fa0/9

    Fa0/10, Fa0/12, Fa0/13, Fa0/14

    Fa0/15, Fa0/16, Fa0/17, Fa0/19

    Fa0/20, Fa0/21, Fa0/22, Fa0/23

    Fa0/24, Gig1/1, Gig1/2

    10 Faculty/Staff active Fa0/11

    20 Students active Fa0/18

    30 Guest(Default) active Fa0/6

    99 Management&Native active

    1002 fddi-default active1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S3(config)#inter fa0/6

    S3(config-if)#switchport access vlan 30

    S3(config-if)#inter fa0/11

    S3(config-if)#switchport access vlan 10

    S3(config-if)#inter fa0/18

    S3(config-if)#switchport access vlan 20

    S3(config-if)#end

    S3#

    %SYS-5-CONFIG_I: Configured from console by console

  • 5/26/2018 CAPITULO 3-4

    13/67

    S3#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/7, Fa0/8, Fa0/9

    Fa0/10, Fa0/12, Fa0/13, Fa0/14

    Fa0/15, Fa0/16, Fa0/17, Fa0/19

    Fa0/20, Fa0/21, Fa0/22, Fa0/23

    Fa0/24, Gig1/1, Gig1/2

    10 Faculty/Staff active Fa0/11

    20 Students active Fa0/18

    30 Guest(Default) active Fa0/6

    99 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S1(config)#inter vlan 99

    S1(config-if)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    S1(config-if)#ip add 172.17.99.11 255.255.255.0

    S1(config-if)#no shutS1(config-if)#no shutdown

    S2(config)#inter vlan 99

    S2(config-if)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    S2(config-if)#ip add 172.17.99.12 255.255.255.0

    S2(config-if)#no shutdown

    S3(config)#inter vlan 99

    S3(config-if)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    ip add

    % Incomplete command.

    S3(config-if)#ip add 172.17.99.13 255.255.255.0

    S3(config-if)#no shutdown

  • 5/26/2018 CAPITULO 3-4

    14/67

    S1(config)#inter fa0/1

    S1(config-if)#switchport mode trunk

    S1(config-if)#

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to up

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#inter fa0/2

    S1(config-if)#switchport mode trunk

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#end

    S1#

    %SYS-5-CONFIG_I: Configured from console by console

    S1#show interface trunk

    Port Mode Encapsulation Status Native vlan

    Fa0/1 on 802.1q trunking 99

    Fa0/2 on 802.1q trunking 99

    Port Vlans allowed on trunk

    Fa0/1 1-1005

    Fa0/2 1-1005

    Port Vlans allowed and active in management domain

    Fa0/1 1,10,20,30,99

    Fa0/2 1,10,20,30,99

    Port Vlans in spanning tree forwarding state and not pruned

    Fa0/1 1,10,20,30,99

    Fa0/2 none

    S1#

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (99),

    with S2 FastEthernet0/1 (1).

  • 5/26/2018 CAPITULO 3-4

    15/67

    S2(config)#inter fa0/1

    S2(config-if)#switchport mode trunk

    S2(config-if)#switchport trunk native vlan 99

    S2(config-if)#%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/1 on VLAN0099.Port consistency restored.

    %SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/1 on VLAN0001. Port

    consistency restored.

    S2(config-if)#end

    S2#

    %SYS-5-CONFIG_I: Configured from console by console

    S2#show interface trunk

    Port Mode Encapsulation Status Native vlan

    Fa0/1 on 802.1q trunking 99

    Port Vlans allowed on trunk

    Fa0/1 1-1005

    Port Vlans allowed and active in management domain

    Fa0/1 1,10,20,30,99

    Port Vlans in spanning tree forwarding state and not prunedFa0/1 1,10,20,30,99

    S3(config)#inter fa 0/2

    S3(config-if)#

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S1 FastEthernet0/2 (99).

    S3(config-if)#switchport mode trunk

    S3(config-if)#

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S1 FastEthernet0/2 (99).

    S3(config-if)#switchport mode trunk

    S3(config-if)#switchport trunk native vlan 99

    S3(config-if)#en%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/2 on

    VLAN0099. Port consistency restored.

  • 5/26/2018 CAPITULO 3-4

    16/67

    %SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/2 on VLAN0001. Port

    consistency restored.

    d

    S3#%SYS-5-CONFIG_I: Configured from console by console

    S3#show interface trunk

    Port Mode Encapsulation Status Native vlan

    Fa0/2 on 802.1q trunking 99

    Port Vlans allowed on trunk

    Fa0/2 1-1005

    Port Vlans allowed and active in management domain

    Fa0/2 1,10,20,30,99

    Port Vlans in spanning tree forwarding state and not pruned

    Fa0/2 10,20,30

    S1#ping 172.17.99.12

    Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 172.17.99.12, timeout is 2 seconds:

    !!!!!

    Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/1 ms

    S1#ping 172.17.99.13

    Type escape sequence to abort.

    Sending 5, 100-byte ICMP Echos to 172.17.99.13, timeout is 2 seconds:

    !!!!!

    Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/1 ms

  • 5/26/2018 CAPITULO 3-4

    17/67

  • 5/26/2018 CAPITULO 3-4

    18/67

    Actividad PT 3.5.2: Desafo de configuracin de VLAN

    Switch#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    Switch(config)#hostname S1

    S1(config)#

    S1(config)#enable secret class

    S1(config)#line console 0

    S1(config-line)#pass cisco

    S1(config-line)#login

    S1(config-line)#line vty 0 4S1(config-line)#pass cisco

    S1(config-line)#exit

    S1(config)#no ip dom

    S1(config)#no ip domain lookup

    S1(config)#vlan 56

    S1(config-vlan)#name Management&Native

    S1(config-vlan)#exit

    S1(config)#vlan 10

    S1(config-vlan)#name Faculty/Staff

    S1(config-vlan)#exit

    S1(config)#vlan 20

    S1(config-vlan)#name Students

    S1(config-vlan)#exit

    S1(config)#vlan 30

    S1(config-vlan)#name Guest(Default)

    S1(config-vlan)#exit

    S1(config-if)#inter vlan 56

  • 5/26/2018 CAPITULO 3-4

    19/67

    S1(config-if)#ip add 192.168.56.11 255.255.255.0

    S1(config-if)#no shutdown

    S1(config-if)#

    S1(config-if)#inter fa0/1

    S1(config-if)#switchport mode trunk

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan56, changed state to up

    S1(config-if)#switchport trunk native vlan 56

    S1(config-if)#

    S1(config-if)#inter fa0/2

    S1(config-if)#switchport mode trunk

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up

    S1(config-if)#switchport trunk native vlan 56

    S1(config-if)#end

    S1#

    %SYS-5-CONFIG_I: Configured from console by console

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (56),

    with Switch FastEthernet0/1 (1).

    S1#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/3, Fa0/4, Fa0/5, Fa0/6

    Fa0/7, Fa0/8, Fa0/9, Fa0/10

    Fa0/11, Fa0/12, Fa0/13, Fa0/14

    Fa0/15, Fa0/16, Fa0/17, Fa0/18

    Fa0/19, Fa0/20, Fa0/21, Fa0/22

    Fa0/23, Fa0/24, Gig1/1, Gig1/2

    10 Faculty/Staff active

    20 Students active

    30 Guest(Default) active

    56 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

  • 5/26/2018 CAPITULO 3-4

    20/67

    S1#

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (99),

    with Switch FastEthernet0/2 (1).

    S1#show inter trunk

    Port Mode Encapsulation Status Native vlanFa0/1 on 802.1q trunking 56

    Fa0/2 on 802.1q trunking 56

    Port Vlans allowed on trunk

    Fa0/1 1-1005

    Fa0/2 1-1005

    Port Vlans allowed and active in management domain

    Fa0/1 1,10,20,30,56

    Fa0/2 1,10,20,30,56

    Port Vlans in spanning tree forwarding state and not pruned

    Fa0/1 1,10,20,30,56

    Fa0/2 1,10,20,30,56

    S1#

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (56),

    with Switch FastEthernet0/1 (1).

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (56),

    with Switch FastEthernet0/2 (1).

    S1#config t%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (56),

    with Switch FastEthernet0/1 (1).

    S2(config)#enable secret class

    S2(config)#line console 0

    S2(config-line)#pass cisco

    S2(config-line)#login

    S2(config-line)#exit

    S2(config)#line vty 0 4

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1),

    with S1 FastEthernet0/1 (56).

    S2(config-line)#pass cisco

    S2(config-line)#login

    S2(config-line)#exit

    S2(config)#no ip domain lookup

  • 5/26/2018 CAPITULO 3-4

    21/67

    S2(config)#vlan 56

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1),

    with S1 FastEthernet0/1

    S2(config-vlan)#name Management&Native

    S2(config-vlan)#exit

    S2(config)#vlan 10S2(config-vlan)#name Faculty/Staff

    S2(config-vlan)#exit

    S2(config)#vlan 20

    S2(config-vlan)#name Students

    S2(config-vlan)#

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1),

    with S1 FastEthernet0/1 (56).

    S2(config-vlan)#exit

    S2(config)#vlan 30

    S2(config-vlan)#name Guest(default)

    S2(config-vlan)#exit

    S2(config)#

    S2(config)#inter vlan 56

    S2(config-if)#

    %LINK-5-CHANGED: Interface Vlan56, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan56, changed state to up

    S2(config-if)#ip add 192.168.56.12 255.255.255.0

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1),with S1 FastEthernet0/1 (56).

    shutdown

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1),

    with S1 FastEthernet0/1 (56).

    S2(config)#inter fa0/6

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 30

    S2(config)#inter fa0/11

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 10

    S2(config-if)#inter fa0/18

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 20

    S2(config-if)#exit

    S2#

  • 5/26/2018 CAPITULO 3-4

    22/67

    %SYS-5-CONFIG_I: Configured from console by console

    S2#

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1),

    with S1 FastEthernet0/1 (56).

    S2#config term

    Enter configuration commands, one per line. End with CNTL/Z.

    S2(config)#inter fa0/1

    S2(config-if)#switchport mode trunk

    S2(config-if)#switchport trunk native vlan 56

    S2(config-if)#end

    %SYS-5-CONFIG_I: Configured from console by console

    S2#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5

    Fa0/7, Fa0/8, Fa0/9, Fa0/10

    Fa0/12, Fa0/13, Fa0/14, Fa0/15

    Fa0/16, Fa0/17, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    10 Faculty/Staff active Fa0/1120 Students active Fa0/18

    30 Guest(Default) active Fa0/6

    56 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S2#show inter trunk

    Port Mode Encapsulation Status Native vlan

    Fa0/1 on 802.1q trunking 56

    Port Vlans allowed on trunk

    Fa0/1 1-1005

    Port Vlans allowed and active in management domain

    Fa0/1 1,10,20,30,56

  • 5/26/2018 CAPITULO 3-4

    23/67

    Port Vlans in spanning tree forwarding state and not pruned

    Fa0/1 10,20,30,56

    Switch(config)#hostname S3

    S3(config)#

    S3(config)#enable secret classS3(config)#line console 0

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S1 FastEthernet0/2 (56).

    S3(config-line)#pass cisco

    S3(config-line)#login

    S3(config-line)#exit

    S3(config)#line vty 0 4

    S3(config-line)#pass cisco

    S3(config-line)#login

    S3(config-line)#exit

    S3(config)#no ip domain lookup

    S3(config)#

    S3(config)#vlan 56

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S1 FastEthernet0

    S3(config-vlan)#name Management&Native

    S3(config-vlan)#exit

    S3(config)#vlan 10

    S3(config-vlan)#name Faculty/Staff

    S3(config-vlan)#exitS3(config)#vlan 20

    S3(config-vlan)#name Students

    S3(config-vlan)#exit

    S3(config)#

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S1 FastEthernet0/2 (56).

    S3(config)#vlan 30

    S3(config-vlan)#name Guest(Default)

    S3(config-vlan)#exit

    S3(config)#

    S3(config)#inter fa0/6

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S1 FastEthernet0/2 (56).

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 30

  • 5/26/2018 CAPITULO 3-4

    24/67

    S3(config-if)#exit

    S3(config)#inter fa0/11

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 10

    S3(config-if)#exit

    S3(config)#switchport mode access%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S1 FastEthernet0/2 (56).

    S3(config)#inter fa0/18

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 20

    S3(config-if)#exit

    S3(config)#

    S3(config)#inter vlan 56

    S3(config-if)#ip add 192.168.56.13 255.255.255.0

    S3(config-if)#no shutdown

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S1 FastEthernet0/2 (56).

    S3(config-if)#

    S3(config-if)#inter fa0/2

    S3(config-if)#sw

    S3(config-if)#switchport mode trunk

    S3(config-if)#switchport trunk native vlan 56

    S3(config-if)#endS3#

    %SYS-5-CONFIG_I: Configured from console by console

    S3#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/3, Fa0/4, Fa0/5

    Fa0/7, Fa0/8, Fa0/9, Fa0/10

    Fa0/12, Fa0/13, Fa0/14, Fa0/15

    Fa0/16, Fa0/17, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    10 Faculty/Staff active Fa0/11

    20 Students active Fa0/18

    30 Guest(Default) active Fa0/6

    56 Management&Native active

  • 5/26/2018 CAPITULO 3-4

    25/67

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S3#show interface trunk

    Port Mode Encapsulation Status Native vlanFa0/2 on 802.1q trunking 56

    Port Vlans allowed on trunk

    Fa0/2 1-1005

    Port Vlans allowed and active in management domain

    Fa0/2 1,10,20,30,56

    Port Vlans in spanning tree forwarding state and not pruned

    Fa0/2 10,20,30,56

  • 5/26/2018 CAPITULO 3-4

    26/67

    Actividad PT 3.5.3: Resolucin de problemas de configuraciones de VLAN

    S1#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/3, Fa0/4, Fa0/5, Fa0/6

    Fa0/7, Fa0/8, Fa0/9, Fa0/10

    Fa0/11, Fa0/12, Fa0/13, Fa0/14

    Fa0/15, Fa0/16, Fa0/17, Fa0/18

    Fa0/19, Fa0/20, Fa0/21, Fa0/22

    Fa0/23, Fa0/24, Gig1/1, Gig1/2

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S1(config)#vlan 56

    %LINK-5-CHANGED: Interface Vlan56, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan56, changed state to up

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S3 FastEthernet0/2 (56).

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1),

    with S2 FastEthernet0/1 (56

    S1(config-vlan)#name Management&Native

    S1(config-vlan)#exit

    S1(config)#vlan 10

    S1(config-vlan)#name Faculty/Staff

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S3 FastEthernet0/2 (56).

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1),with S2 FastEthernet0/1 (56).

    S1(config-vlan)#exit

    S1(config)#vlan 20

    S1(config-vlan)#name Students

    S1(config-vlan)#exit

    S1(config)#vlan 30

    S1(config-vlan)#name Guest(Default)

  • 5/26/2018 CAPITULO 3-4

    27/67

    S1(config-vlan)#exit

    S1(config)#interface vlan 56

    S1(config-if)#ip add 192.168.56.11 255.255.255.0

    S1(config-if)#no shutdownS1(config-if)#

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (1),

    with S2 FastEthernet0/1 (56).

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S3 FastEthernet0/2 (56).

    S1(config-if)#

    S1(config-if)#exit

    S1(config-if)#inter fa0/1

    S1(config-if)#switchport mode trunk

    S1(config-if)#switchport trunk native vlan 56

    S1(config-if)#exit

    S1(config)#inter fa0/2

    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2 (1),

    with S3 FastEthernet0/2 (56).

    S1(config-if)#switchport mode trunk

    S1(config-if)#switchport trunk native vlan 56S1(config-if)#end

    S1#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/3, Fa0/4, Fa0/5, Fa0/6

    Fa0/7, Fa0/8, Fa0/9, Fa0/10

    Fa0/11, Fa0/12, Fa0/13, Fa0/14

    Fa0/15, Fa0/16, Fa0/17, Fa0/18

    Fa0/19, Fa0/20, Fa0/21, Fa0/22

    Fa0/23, Fa0/24, Gig1/1, Gig1/2

    10 Faculty/Staff active

    20 Students active

    30 Guest(Default) active

  • 5/26/2018 CAPITULO 3-4

    28/67

    56 Management&Native active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S1#show inter trunk

    Port Mode Encapsulation Status Native vlan

    Fa0/1 on 802.1q trunking 56

    Fa0/2 on 802.1q trunking 56

    Port Vlans allowed on trunk

    Fa0/1 1-1005

    Fa0/2 1-1005

    Port Vlans allowed and active in management domain

    Fa0/1 1,10,20,30,56

    Fa0/2 1,10,20,30,56

    Port Vlans in spanning tree forwarding state and not pruned

    Fa0/1 1,10,20,30,56

    Fa0/2 1,10,20,30,56

    S2#show inter trunk

    S2#

    S2#

    S2#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    S2(config)#

    S2(config)#

    S2(config)#

    S2(config)#inter fa0/1

    S2(config-if)#switchport mode trunk

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

  • 5/26/2018 CAPITULO 3-4

    29/67

    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up

    S2(config-if)#switchport trunk native vlan 56

    S2(config-if)#exit

    S2(config)#end

    S2#%SYS-5-CONFIG_I: Configured from console by console

    S2#show inter trunk

    Port Mode Encapsulation Status Native vlan

    Fa0/1 on 802.1q trunking 56

    Port Vlans allowed on trunk

    Fa0/1 1-1005

    Port Vlans allowed and active in management domain

    Fa0/1 1,10,20,30,56

    Port Vlans in spanning tree forwarding state and not pruned

    Fa0/1 1,10,20,30,56

    S3#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/3, Fa0/4, Fa0/5Fa0/6, Fa0/7, Fa0/8, Fa0/9

    Fa0/10, Fa0/11, Fa0/12, Fa0/13

    Fa0/14, Fa0/15, Fa0/16, Fa0/17

    Fa0/18, Fa0/19, Fa0/20, Fa0/21

    Fa0/22, Fa0/23, Fa0/24, Gig1/1

    Gig1/2

    10 Faculty/Staff active

    20 Students active

    30 Guest(Default) active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

  • 5/26/2018 CAPITULO 3-4

    30/67

    S3(config)#inter fa0/6

    S3(config-if)#switchport mode acces

    S3(config-if)#switchport access vlan 30

    S3(config-if)#exit

    S3(config)#inter fa0/11S3(config-if)#switchport mode acces

    S3(config-if)#switchport access vlan 10

    S3(config-if)#exit

    S3(config)#inter fa0/18

    S3(config-if)#switchport mode acces

    S3(config-if)#switchport access vlan 20

    S3(config-if)#exit

    S3(config)#

    S3(config)#end

    S3(config)#vlan 56

    S3(config-vlan)#name Management&Native

    S3(config-vlan)#exit

    S3(config)#inter vlan 56

    S3(config-if)#ip add 192.168.56.13 255.255.255.0

    S3(config-if)#no shutdown

    S1#ping 192.168.56.13

    Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.56.13, timeout is 2 seconds:

    !!!!!

    Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/1 ms

    S1#ping 192.168.56.12

    Type escape sequence to abort.

    Sending 5, 100-byte ICMP Echos to 192.168.56.12, timeout is 2 seconds:

    !!!!!

    Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/1 ms

  • 5/26/2018 CAPITULO 3-4

    31/67

    PING PC1 A PC4

    PING PC2 A PC5

  • 5/26/2018 CAPITULO 3-4

    32/67

    PING PC3 A PC6

    PING PC4 A PC1

  • 5/26/2018 CAPITULO 3-4

    33/67

    PING PC5 A PC2

    PING PC6 A PC3

  • 5/26/2018 CAPITULO 3-4

    34/67

    CAPITULO 4

    Actividad PT 4.3.3: Configurar VTP

    S1#show run

    Building configuration...

    Current configuration : 1276 bytes

    !

    version 12.2

    no service timestamps log datetime msec

    no service timestamps debug datetime msec

    no service password-encryption

    !

    hostname S1

    !enable secret 5 $1$n6kA$3hhB8rRv3Z/3EME7s7som1

    enable password cisco

    !

    !

    !

    no ip domain-lookup

    !

  • 5/26/2018 CAPITULO 3-4

    35/67

    spanning-tree mode pvst

    !

    interface FastEthernet0/1

    !

    interface FastEthernet0/2

    !interface FastEthernet0/3

    !

    interface FastEthernet0/4

    !

    interface FastEthernet0/5

    !

    interface FastEthernet0/6

    !

    interface FastEthernet0/7

    !

    interface FastEthernet0/8

    !

    interface FastEthernet0/9

    !

    interface FastEthernet0/10

    !

    interface FastEthernet0/11

    !

    interface FastEthernet0/12

    !

    interface FastEthernet0/13!

    interface FastEthernet0/14

    !

    interface FastEthernet0/15

    !

    interface FastEthernet0/16

    !

    interface FastEthernet0/17

    !

    interface FastEthernet0/18

    !

    interface FastEthernet0/19

    !

    interface FastEthernet0/20

    !

    interface FastEthernet0/21

    !

  • 5/26/2018 CAPITULO 3-4

    36/67

    interface FastEthernet0/22

    !

    interface FastEthernet0/23

    !

    interface FastEthernet0/24

    !interface GigabitEthernet1/1

    !

    interface GigabitEthernet1/2

    !

    interface Vlan1

    no ip address

    shutdown

    !

    interface Vlan99

    ip address 172.17.99.31 255.255.255.0

    !

    banner motd ^C

    AUTHORIZED ACCESS ONLY

    ^C

    !

    line con 0

    password cisco

    login

    !

    line vty 0 4

    password ciscologin

    line vty 5 15

    password cisco

    login

    !

    !

    end

    S1#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16

  • 5/26/2018 CAPITULO 3-4

    37/67

    Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active1005 trnet-default active

    S2#show run

    Building configuration...

    Current configuration : 1276 bytes

    !

    version 12.2

    no service timestamps log datetime msec

    no service timestamps debug datetime msec

    no service password-encryption

    !

    hostname S2

    !

    enable secret 5 $1$cJdD$ruUj9RgymakTbAZWzh0in/

    enable password cisco

    !

    !

    !

    no ip domain-lookup

    !spanning-tree mode pvst

    !

    interface FastEthernet0/1

    !

    interface FastEthernet0/2

    !

    interface FastEthernet0/3

    !

    interface FastEthernet0/4

    !

    interface FastEthernet0/5

    !

    interface FastEthernet0/6

    !

    interface FastEthernet0/7

    !

    interface FastEthernet0/8

  • 5/26/2018 CAPITULO 3-4

    38/67

    !

    interface FastEthernet0/9

    !

    interface FastEthernet0/10

    !

    interface FastEthernet0/11!

    interface FastEthernet0/12

    !

    interface FastEthernet0/13

    !

    interface FastEthernet0/14

    !

    interface FastEthernet0/15

    !

    interface FastEthernet0/16

    !

    interface FastEthernet0/17

    !

    interface FastEthernet0/18

    !

    interface FastEthernet0/19

    !

    interface FastEthernet0/20

    !

    interface FastEthernet0/21

    !interface FastEthernet0/22

    !

    interface FastEthernet0/23

    !

    interface FastEthernet0/24

    !

    interface GigabitEthernet1/1

    !

    interface GigabitEthernet1/2

    !

    interface Vlan1

    no ip address

    shutdown

    !

    interface Vlan99

    ip address 172.17.99.32 255.255.255.0

    !

  • 5/26/2018 CAPITULO 3-4

    39/67

    banner motd ^C

    AUTHORIZED ACCESS ONLY

    ^C

    !

    line con 0

    password ciscologin

    !

    line vty 0 4

    password cisco

    login

    line vty 5 15

    password cisco

    login

    !

    !

    end

    S2#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S3#show run

    Building configuration...

    Current configuration : 1276 bytes

    !

    version 12.2

    no service timestamps log datetime msec

    no service timestamps debug datetime msec

    no service password-encryption

  • 5/26/2018 CAPITULO 3-4

    40/67

    !

    hostname S3

    !

    enable secret 5 $1$9Han$RnE35tl9zUAsWuBjYhczi1

    enable password cisco

    !!

    !

    no ip domain-lookup

    !

    spanning-tree mode pvst

    !

    interface FastEthernet0/1

    !

    interface FastEthernet0/2

    !

    interface FastEthernet0/3

    !

    interface FastEthernet0/4

    !

    interface FastEthernet0/5

    !

    interface FastEthernet0/6

    !

    interface FastEthernet0/7

    !

    interface FastEthernet0/8!

    interface FastEthernet0/9

    !

    interface FastEthernet0/10

    !

    interface FastEthernet0/11

    !

    interface FastEthernet0/12

    !

    interface FastEthernet0/13

    !

    interface FastEthernet0/14

    !

    interface FastEthernet0/15

    !

    interface FastEthernet0/16

    !

  • 5/26/2018 CAPITULO 3-4

    41/67

    interface FastEthernet0/17

    !

    interface FastEthernet0/18

    !

    interface FastEthernet0/19

    !interface FastEthernet0/20

    !

    interface FastEthernet0/21

    !

    interface FastEthernet0/22

    !

    interface FastEthernet0/23

    !

    interface FastEthernet0/24

    !

    interface GigabitEthernet1/1

    !

    interface GigabitEthernet1/2

    !

    interface Vlan1

    no ip address

    shutdown

    !

    interface Vlan99

    ip address 172.17.99.33 255.255.255.0

    !banner motd ^C

    AUTHORIZED ACCESS ONLY

    ^C

    !

    line con 0

    password cisco

    login

    !

    line vty 0 4

    password cisco

    login

    line vty 5 15

    password cisco

    login

    !

    !

    End

  • 5/26/2018 CAPITULO 3-4

    42/67

    S3#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16

    Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S1(config)#vtp mode server

    Device mode already VTP SERVER.

    S1(config)#vtp domain CCNA

    Changing VTP domain name from NULL to CCNA

    S1(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S1(config)#

    S1(config)#end

    S1#show vtp status

    VTP Version : 2Configuration Revision : 0

    Maximum VLANs supported locally : 255

    Number of existing VLANs : 5

    VTP Operating Mode : Server

    VTP Domain Name : CCNA

    VTP Pruning Mode : Disabled

    VTP V2 Mode : Disabled

    VTP Traps Generation : Disabled

    MD5 digest : 0x8C 0x29 0x40 0xDD 0x7F 0x7A 0x63 0x17

    Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

    Local updater ID is 0.0.0.0 (no valid interface found)

    S2(config)#vtp mode client

    Setting device to VTP CLIENT mode.

  • 5/26/2018 CAPITULO 3-4

    43/67

    S2(config)#

    S2(config)#vtp domain CCNA

    Changing VTP domain name from NULL to CCNA

    S2(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S2(config)#S2(config)#exit

    S2#

    %SYS-5-CONFIG_I: Configured from console by console

    S2#show vtp status

    VTP Version : 2

    Configuration Revision : 0

    Maximum VLANs supported locally : 255

    Number of existing VLANs : 5

    VTP Operating Mode : Client

    VTP Domain Name : CCNA

    VTP Pruning Mode : Disabled

    VTP V2 Mode : Disabled

    VTP Traps Generation : Disabled

    MD5 digest : 0x8C 0x29 0x40 0xDD 0x7F 0x7A 0x63 0x17

    Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

    S2#show vtp pass

    VTP Password: cisco

    S3(config)#vtp mode client

    Setting device to VTP CLIENT mode.

    S3(config)#vtp domain CCNA

    Changing VTP domain name from NULL to CCNA

    S3(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S3(config)#

    S3(config)#exit

    S3#

    %SYS-5-CONFIG_I: Configured from console by console

    S3#show vtp status

    VTP Version : 2

    Configuration Revision : 0

    Maximum VLANs supported locally : 255

    Number of existing VLANs : 5

    VTP Operating Mode : Client

  • 5/26/2018 CAPITULO 3-4

    44/67

    VTP Domain Name : CCNA

    VTP Pruning Mode : Disabled

    VTP V2 Mode : Disabled

    VTP Traps Generation : Disabled

    MD5 digest : 0x8C 0x29 0x40 0xDD 0x7F 0x7A 0x63 0x17

    Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00S3#show vtp pass

    VTP Password: cisco

    S1(config)#vlan 10

    S1(config-vlan)#name Faculty/Staff

    S1(config-vlan)#exit

    S1(config)#vlan 20

    S1(config-vlan)#name Students

    S1(config-vlan)#exit

    S1(config)#vlan 30

    S1(config-vlan)#name Guest(Default)

    S1(config-vlan)#exit

    S1(config)#vlan 99

    S1(config-vlan)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    S1(config-vlan)#name Management&Native

    S1(config-vlan)#exit

    S1(config)#exit

    S1#

    %SYS-5-CONFIG_I: Configured from console by console

    S1#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Fa0/6, Fa0/7, Fa0/8

    Fa0/9, Fa0/10, Fa0/11, Fa0/12

    Fa0/13, Fa0/14, Fa0/15, Fa0/16

    Fa0/17, Fa0/18, Fa0/19, Fa0/20

    Fa0/21, Fa0/22, Fa0/23, Fa0/24

    Gig1/1, Gig1/2

    10 Faculty/Staff active

    20 Students active

    30 Guest(Default) active

    99 Management&Native active

    1002 fddi-default active

  • 5/26/2018 CAPITULO 3-4

    45/67

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S1(config)#inter fa0/1S1(config-if)#switchport mode trunk

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to up

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#exit

    S1(config)#inter fa0/3

    S1(config-if)#switchport mode trunk

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#exit

    S2(config)#inter fa0/1

    S2(config-if)#switchport mode trunk

    S2(config-if)#switchport trunk native vlan 99

    S2(config-if)#exit

    S3(config)#inter fa0/3

    S3(config-if)#switchport mode trunk

    S3(config-if)#switchport trunk native vlan 99

    S3(config-if)#exi%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/3 on

    VLAN0099. Port consistency restored.

    %SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/3 on VLAN0001. Port

    consistency restored

    S3(config-if)#exit

    S2(config)#inter fa0/11

    S2(config-if)#switchport mode acces

    S2(config-if)#switchport access vlan 10

    S2(config-if)#exit

    S2(config)#inter fa0/18

    S2(config-if)#switchport mode acces

  • 5/26/2018 CAPITULO 3-4

    46/67

    S2(config-if)#switchport access vlan 20

    S2(config-if)#exit

    S2(config)#inter fa0/6

    S2(config-if)#switchport mode acces

    S2(config-if)#switchport access vlan 30

    S2(config-if)#exit

    S3(config)#inter fa 0/11

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 10

    S3(config-if)#exit

    S3(config)#inter fa 0/18

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 20

    S3(config-if)#inter fa 0/6

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 30

    S3(config-if)#exit

  • 5/26/2018 CAPITULO 3-4

    47/67

    Actividad PT 4.4.1: Configuracin bsica del VTP

    Switch#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    Switch(config)#hostname S1

    S1(config)#enable secret clas

    S1(config)#enable secret class

    S1(config)#no ip domain-lookup

    S1(config)#line console 0

    S1(config-line)#pass cisco

    S1(config-line)#login

    S1(config-line)#line vty 0 15

    S1(config-line)#pass cisco

    S1(config-line)#login

    S1(config-line)#end

    S1#

    %SYS-5-CONFIG_I: Configured from console by console

    S1#show vtp statusVTP Version : 2

    Configuration Revision : 0

    Maximum VLANs supported locally : 255

    Number of existing VLANs : 5

    VTP Operating Mode : Server

    VTP Domain Name :

    VTP Pruning Mode : Disabled

  • 5/26/2018 CAPITULO 3-4

    48/67

    VTP V2 Mode : Disabled

    VTP Traps Generation : Disabled

    MD5 digest : 0x7D 0x5A 0xA6 0x0E 0x9A 0x72 0xA0 0x3A

    Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

    Local updater ID is 0.0.0.0 (no valid interface found)

    S1#S1#config

    Configuring from terminal, memory, or network [terminal]?

    Enter configuration commands, one per line. End with CNTL/Z.

    S1(config)#vtp mode server

    Device mode already VTP SERVER.

    S1(config)#vtp domain lab4

    Changing VTP domain name from NULL to lab4

    S1(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S1(config)#end

    S1#

    %SYS-5-CONFIG_I: Configured from console by console

    S1#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    S1(config)#

    S1(config)#inter fa0/1

    S1(config-if)#switchport mode trunk

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#no shutdown

    %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to down

    S1(config-if)#inter fa0/2

    S1(config-if)#switchport mode trunk

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#no shutdown

    %LINK-5-CHANGED: Interface FastEthernet0/2, changed state to down

    S1(config-if)#end

    S1#

    %SYS-5-CONFIG_I: Configured from console by console

    S1#config

    Configuring from terminal, memory, or network [terminal]?

    Enter configuration commands, one per line. End with CNTL/Z.

    S1(config)#vlan 99

    S1(config-vlan)#name management

    S1(config-vlan)#exit

  • 5/26/2018 CAPITULO 3-4

    49/67

    S1(config)#vlan 10

    S1(config-vlan)#name faculty/staff

    S1(config-vlan)#exit

    S1(config)#vlan 20

    S1(config-vlan)#name students

    S1(config-vlan)#exitS1(config)#vlan 30

    S1(config-vlan)#name guest

    S1(config-vlan)#exit

    S1(config)#

    S1(config)#

    S1(config)#inter vlan 99

    S1(config-if)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    S1(config-if)#ip add 172.17.99.11 255.255.255.0

    S1(config-if)#no shutdown

    Switch>en

    Switch#config

    Configuring from terminal, memory, or network [terminal]?

    Enter configuration commands, one per line. End with CNTL/Z.

    Switch(config)#hostname S2

    S2(config)#enable secret class

    S2(config)#no ip domain-lookup

    S2(config)#line console 0

    S2(config-line)#pass ciscoS2(config-line)#login

    S2(config-line)#line vty 0 15

    S2(config-line)#pass cisco

    S2(config-line)#login

    S2(config-line)#end

    S2#

    %SYS-5-CONFIG_I: Configured from console by console

    S2#

    S2#config

    Configuring from terminal, memory, or network [terminal]?

    Enter configuration commands, one per line. End with CNTL/Z.

    S2(config-if)#inter fa 0/18

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 20

    S2(config-if)#no shutdown

    S2(config-if)#inter fa 0/11

  • 5/26/2018 CAPITULO 3-4

    50/67

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 10

    S2(config-if)#no shutdown

    S2(config-if)#inter fa 0/6

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 30S2(config-if)#no shutdown

    S2(config-if)#

    %LINK-5-CHANGED: Interface FastEthernet0/18, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18, changed state to up

    S2(config-if)#

    S2(config-if)#exit

    S2(config)#vtp mode client

    Setting device to VTP CLIENT mode.

    S2(config)#vtp domain Lab4

    Changing VTP domain name from NULL to Lab4

    S2(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S2(config)#end

    S2#

    %SYS-5-CONFIG_I: Configured from console by console

    S2#config

    Configuring from terminal, memory, or network [terminal]?Enter configuration commands, one per line. End with CNTL/Z.

    S2(config)#inter fa0/1

    S2(config-if)#switchpot mode trunk

    ^

    % Invalid input detected at '^' marker.

    S2(config-if)#switchport mode trunk

    S2(config-if)#switchport trunk native vlan 99

    S2(config-if)#no shutdown

    S2(config-if)#

    %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    S2(config-if)#inter fa 0/6

    S2(config-if)#switchport port-security

  • 5/26/2018 CAPITULO 3-4

    51/67

    S2(config-if)#switchport port-security maximum 1

    S2(config-if)#switchport port-security mac-address sticky

    S2(config-if)#inter fa 0/11

    S2(config-if)#switchport port-security

    S2(config-if)#switchport port-security maximum 1

    S2(config-if)#switchport port-security mac-address stickyS2(config-if)#inter fa 0/18

    S2(config-if)#switchport port-security

    S2(config-if)#switchport port-security maximum 1

    S2(config-if)#switchport port-security mac-address sticky

    S2(config-if)#end

    S2#

    %SYS-5-CONFIG_I: Configured from console by console

    S2#

    S2#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    S2(config)#vlan 88

    VTP VLAN configuration not allowed when device is in CLIENT mode.

    S2(config)#

    S2(config)#

    S2(config)#inter vlan 99

    S2(config-if)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to up

    S2(config-if)#ip add 172.17.99.12 255.255.255.0

    S2(config-if)#no shutdown

    S2(config-if)#exit

    S2(config)#exit

    Switch>

    Switch>en

    Switch#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    Switch(config)#hostname S3

    S3(config)#enable secret class

    S3(config)#no ip domain-lookup

    S3(config)#line console 0

    S3(config-line)#pass cisco

    S3(config-line)#login

    S3(config-line)#line vty 0 15

    S3(config-line)#pass cisco

  • 5/26/2018 CAPITULO 3-4

    52/67

    S3(config-line)#login

    S3(config-line)#end

    S3#

    %SYS-5-CONFIG_I: Configured from console by console

    S3#config tEnter configuration commands, one per line. End with CNTL/Z.

    S3(config)#

    S3(config)#inter fa0/6

    S3(config-if)#switchpot mode access

    ^

    % Invalid input detected at '^' marker.

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 30

    % Access VLAN does not exist. Creating vlan 30

    S3(config-if)#inter fa0/6

    S3(config-if)#switchport mode access

    S3(config-if)#no shutdown

    S3(config-if)#

    %LINK-5-CHANGED: Interface FastEthernet0/6, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed state to up

    S3(config-if)#inter fa0/11

    S3(config-if)#switchport mode access

    S3(config-if)#no shutdown

    S3(config-if)#

    %LINK-5-CHANGED: Interface FastEthernet0/11, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state to up

    S3(config-if)#inter fa0/18

    S3(config-if)#switchport mode access

    S3(config-if)#no shutdown

    S3(config-if)#

    %LINK-5-CHANGED: Interface FastEthernet0/18, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/18, changed state to up

    S3(config-if)#exit

    S3(config)#vtp mode transparent

    Setting device to VTP TRANSPARENT mode.

  • 5/26/2018 CAPITULO 3-4

    53/67

    S3(config)#vtp domain Lab4

    Changing VTP domain name from NULL to Lab4

    S3(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S3(config)#inter fa0/2S3(config-if)#switchport mode trunk

    S3(config-if)#switchport trunk native vlan 99

    S3(config-if)#no shutdown

    S3#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    S3(config)#

    S3(config)#inter fa0/6

    S3(config-if)#switchport port-security

    S3(config-if)#switchport port-security maximum 1

    S3(config-if)#switchport port-security mac-address sticky

    S3(config-if)#inter fa0/11

    S3(config-if)#switchport port-security

    S3(config-if)#switchport port-security maximum 1

    S3(config-if)#switchport port-security mac-address sticky

    S3(config-if)#inter fa0/18

    S3(config-if)#switchport port-security

    S3(config-if)#switchport port-security maximum 1

    S3(config-if)#switchport port-security mac-address sticky

    S3(config-if)#endS3#

    %SYS-5-CONFIG_I: Configured from console by console

    S3#

    S3#

    S3#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    S3(config)#vlan 99

    S3(config-vlan)#name management

    S3(config-vlan)#exit

    S3(config)#vlan 10

    S3(config-vlan)#name faculty/staff

    S3(config-vlan)#exit

    S3(config)#vlan 20

    S3(config-vlan)#name students

    S3(config-vlan)#exit

    S3(config)#vlan 30

  • 5/26/2018 CAPITULO 3-4

    54/67

    S3(config-vlan)#name guest

    S3(config-vlan)#exit

    S3(config)#

    S3(config)#inter vlan 99

    S3(config-if)#

    %LINK-5-CHANGED: Interface Vlan99, changed state to up

    S3(config-if)#ip add 172.17.99.13 255.255.255.0

    S3(config-if)#no shutdown

    S3(config-if)#

    S3(config-if)#inter fa0/6

    S3(config-if)#switchport access vlan 30

    S3(config-if)#inter fa0/11

    S3(config-if)#switchport access vlan 10

    S3(config-if)#inter fa0/18

    S3(config-if)#switchport access vlan 20

    S3(config-if)#end

  • 5/26/2018 CAPITULO 3-4

    55/67

    Actividad PT 4.4.3: Resolucin de problemas de configuracin del VTP

    S1#show vlan brie

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5

    Fa0/6, Fa0/7, Fa0/8, Fa0/9

    Fa0/10, Fa0/11, Fa0/12, Fa0/13

    Fa0/14, Fa0/15, Fa0/16, Fa0/17

    Fa0/18, Fa0/19, Fa0/20, Fa0/21

    Fa0/22, Fa0/23, Fa0/24, Gig1/1

    Gig1/2

    10 Faculty/Staff active20 Students active

    30 Guest active

    99 management active

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S1#show interface trunk

    Port Mode Encapsulation Status Native vlan

    Fa0/1 on 802.1q trunking 99

    Port Vlans allowed on trunk

    Fa0/1 1-1005

    Port Vlans allowed and active in management domain

    Fa0/1 1,10,20,30,99

    Port Vlans in spanning tree forwarding state and not prunedFa0/1 1,10,20,30,99

    S1(config)#inter fa0/2

    S1(config-if)#switchport mode trunk

  • 5/26/2018 CAPITULO 3-4

    56/67

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#no shutdown

    S1(config-if)#exit

    S1#show interface trunk

    Port Mode Encapsulation Status Native vlan

    Fa0/1 on 802.1q trunking 99

    Fa0/2 on 802.1q trunking 99

    Port Vlans allowed on trunk

    Fa0/1 1-1005

    Fa0/2 1-1005

    Port Vlans allowed and active in management domain

    Fa0/1 1,10,20,30,99

    Fa0/2 1,10,20,30,99

    Port Vlans in spanning tree forwarding state and not pruned

    Fa0/1 1,10,20,30,99

    Fa0/2 1,10,20,30,99

    show vtp status

    VTP Version : 2Configuration Revision : 8

    Maximum VLANs supported locally : 255

    Number of existing VLANs : 9

    VTP Operating Mode : Server

    VTP Domain Name : Lab4_3

    VTP Pruning Mode : Disabled

    VTP V2 Mode : Disabled

    VTP Traps Generation : Disabled

    MD5 digest : 0xD3 0x94 0xF8 0x2B 0xAA 0x7E 0xB9 0x50

    Configuration last modified by 0.0.0.0 at 3-1-93 00:01:36

    Local updater ID is 176.17.99.11 on interface Vl99 (lowest numbered VLAN interface found)

    S1#show vtp pass

    VTP Password: Cisco

  • 5/26/2018 CAPITULO 3-4

    57/67

    S1(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S1#show vtp passVTP Password: cisco

    S1(config-if)#inter vlan 99

    S1(config-if)#ip add 172.17.99.11 255.255.255.0

    S1(config-if)#no shutdown

    S1(config-if)#exit

    S2#show vlan brief

    VLAN Name Status Ports

    ---- -------------------------------- --------- -------------------------------

    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

    Fa0/5, Gig1/1, Gig1/2

    10 VLAN0010 active Fa0/6, Fa0/7, Fa0/8, Fa0/9

    Fa0/1020 VLAN0020 active Fa0/11, Fa0/12, Fa0/13, Fa0/14

    Fa0/15, Fa0/16, Fa0/17

    30 VLAN0030 active Fa0/18, Fa0/19, Fa0/20, Fa0/21

    Fa0/22, Fa0/23, Fa0/24

    1002 fddi-default active

    1003 token-ring-default active

    1004 fddinet-default active

    1005 trnet-default active

    S2#00:16:00 %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/1

    because of VTP domain mismatch.

    S2#show inter trunk

    S2#show vtp status

  • 5/26/2018 CAPITULO 3-4

    58/67

    VTP Version : 2

    Configuration Revision : 0

    Maximum VLANs supported locally : 255

    Number of existing VLANs : 8

    VTP Operating Mode : Client

    VTP Domain Name : Lab4VTP Pruning Mode : Disabled

    VTP V2 Mode : Disabled

    VTP Traps Generation : Disabled

    MD5 digest : 0x81 0xFC 0x36 0x2C 0x36 0xB4 0x23 0x13

    Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

    S2#00:17:30 %DTP-5-DOMAINMISMATCH: Unable to perform trunk negotiation on port Fa0/1

    because of VTP domain mismatch.

    S2#show vtp pass

    The VTP password is not configured.

    S2(config-if)#inter fa0/18

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 20

    S2(config-if)#no shutdownS2(config-if)#inter fa0/11

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 10

    S2(config-if)#no shutdown

    S2(config-if)#inter fa0/6

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 30

    S2(config-if)#no shutdown

    S2(config-if)#inter fa0/1

    S2(config-if)#switchport mode trunk

    S2(config-if)#switchport trunk native vlan 99

    S2(config-if)#no shutdown

    S2#show inter trunk

  • 5/26/2018 CAPITULO 3-4

    59/67

    Port Mode Encapsulation Status Native vlan

    Fa0/1 on 802.1q trunking 99

    Port Vlans allowed on trunk

    Fa0/1 1-1005

    Port Vlans allowed and active in management domain

    Fa0/1 1,10,20,30

    Port Vlans in spanning tree forwarding state and not pruned

    Fa0/1 1,10,20,30

    S2(config)#vtp mode client

    Device mode already VTP CLIENT.

    S2(config)#vtp domain Lab3_4

    Changing VTP domain name from Lab4 to Lab3_4

    S2(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S2(config)#end

    S2#show vtp pass

    VTP Password: cisco

    S2#show vtp status

    VTP Version : 2

    Configuration Revision : 0

    Maximum VLANs supported locally : 255

    Number of existing VLANs : 8

    VTP Operating Mode : Client

    VTP Domain Name : Lab4_3

    VTP Pruning Mode : Disabled

    VTP V2 Mode : Disabled

    VTP Traps Generation : Disabled

    MD5 digest : 0x3D 0xB9 0x8F 0xB5 0x39 0xF4 0x6C 0x76

    Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

  • 5/26/2018 CAPITULO 3-4

    60/67

    S3#show vtp status

    VTP Version : 2

    Configuration Revision : 0

    Maximum VLANs supported locally : 255

    Number of existing VLANs : 8

    VTP Operating Mode : ClientVTP Domain Name : Lab4

    VTP Pruning Mode : Disabled

    VTP V2 Mode : Disabled

    VTP Traps Generation : Disabled

    MD5 digest : 0x81 0xFC 0x36 0x2C 0x36 0xB4 0x23 0x13

    Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00

    S3#show vtp pass

    The VTP password is not configured.

    S3(config-if)#inter vlan 99

    S3(config-if)#ip add 172.17.99.13 255.255.255.0

    S3(config-if)#no shutdown

    S3(config-if)#end

    S3(config)#vtp domain Lab4_3Changing VTP domain name from Lab to Lab4_3

    S3(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S3#show vtp status

    VTP Version : 2

    Configuration Revision : 8

    Maximum VLANs supported locally : 255

    Number of existing VLANs : 9

    VTP Operating Mode : Client

    VTP Domain Name : Lab4_3

    VTP Pruning Mode : Disabled

    VTP V2 Mode : Disabled

    VTP Traps Generation : Disabled

    MD5 digest : 0x81 0x95 0xD8 0xA7 0x78 0x4F 0x04 0xB8

  • 5/26/2018 CAPITULO 3-4

    61/67

    Configuration last modified by 0.0.0.0 at 3-1-93 00:01:36

    S3#show vtp pass

    VTP Password: cisco

  • 5/26/2018 CAPITULO 3-4

    62/67

    Actividad PT 4.5.1: Desafo de habilidades de integracin de Packet Tracer

    Switch#config t

    Enter configuration commands, one per line. End with CNTL/Z.

    Switch(config)#hostname S1

    S1(config)#enable secret clas

    S1(config)#enable secret class

    S1(config)#no ip domain-lookup

    S1(config)#line console 0

    S1(config-line)#pass cisco

    S1(config-line)#login

    S1(config-line)#line vty 0 15

    S1(config-line)#pass cisco

    S1(config-line)#login

    S1(config-line)#endS1(config)#vtp mode server

    Setting device to VTP SERVER mode.

    S1(config)#vtp domain CCNA

    Changing VTP domain name from NULL to CCNA

    S1(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S1(config)#inter fa0/1

  • 5/26/2018 CAPITULO 3-4

    63/67

    S1(config-if)#switchport mode trunk

    S1(config-if)#switchport trunk native vlan 99

    S1(config-if)#no shutdown

    S1(config-if)#inter fa0/3

    S1(config-if)#switchport mode trunkS1(config-if)#switchport trunk native vlan 99

    S1(config-if)#no shutdown

    S1(config-if)#vlan 99

    S1(config-vlan)#name Management&Native

    S1(config-vlan)#exit

    S1(config)#vlan 10

    S1(config-vlan)#name Faculty/Staff

    S1(config-vlan)#exit

    S1(config)#vlan 20

    S1(config-vlan)#name Students

    S1(config-vlan)#exit

    S1(config)#vlan 30

    S1(config-vlan)#name Guest(Default)

    S1(config-vlan)#exit

    S1(config)#inter vlan 99

    S1(config-if)#ip add 172.17.99.31 255.255.255.0

    S1(config-if)#no shutdown

    Switch#config tEnter configuration commands, one per line. End with CNTL/Z.

    Switch(config)#hostname S2

    S2(config)#enable secret class

    S2(config)#no ip domain-lookup

    S2(config)#line console 0

    S2(config-line)#pass cisco

    S2(config-line)#login

    S2(config-line)#line vty 0 15

    S2(config-line)#pass cisco

    S2(config-line)#login

    S2(config-line)#inter fa 0/18

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 20

    % Access VLAN does not exist. Creating vlan 20

    S2(config-if)#no shutdown

    S2(config-if)#inter fa 0/11

    S2(config-if)#switchport mode access

  • 5/26/2018 CAPITULO 3-4

    64/67

    S2(config-if)#switchport access vlan 10

    % Access VLAN does not exist. Creating vlan 10

    S2(config-if)#no shutdown

    S2(config-if)#inter fa 0/6

    S2(config-if)#switchport mode access

    S2(config-if)#switchport access vlan 30S2(config-if)#no shutdown

    S2(config-if)#vtp mode client

    Setting device to VTP CLIENT mode.

    S2(config)#vtp domain CCNA

    Domain name already set to CCNA.

    S2(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S2(config)#inter fa0/1

    S2(config-if)#switchport mode trunk

    S2(config-if)#switchport trunk native vlan 99

    S2(config-if)#no shutdown

    S2(config-if)#inter fa 0/6

    S2(config-if)#switchport port-security

    S2(config-if)#switchport port-security maximum 1

    S2(config-if)#switchport port-security mac-address sticky

    S2(config-if)#inter fa 0/11

    S2(config-if)#switchport port-security

    S2(config-if)#switchport port-security maximum 1

    S2(config-if)#switchport port-security mac-address sticky

    S2(config-if)#inter fa 0/18

    S2(config-if)#switchport port-securityS2(config-if)#switchport port-security maximum 1

    S2(config-if)#switchport port-security mac-address sticky

    S2(config)#inter vlan 99

    S2(config-if)#ip add 172.17.99.32 255.255.255.0

    S2(config-if)#no shutdown

    Switch(config)#hostname S3

    S3(config)#enable secret class

    S3(config)#no ip domain-lookup

    S3(config)#line console 0

    S3(config-line)#pass cisco

    S3(config-line)#login

    S3(config-line)#line vty 0 15

    S3(config-line)#pass cisco

    S3(config-line)#login

  • 5/26/2018 CAPITULO 3-4

    65/67

    S3(config-line)#inter fa 0/18

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 20

    % Access VLAN does not exist. Creating vlan 20

    S3(config-if)#no shutdown

    S3(config-if)#inter fa 0/11S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 10

    % Access VLAN does not exist. Creating vlan 10

    S3(config-if)#no shutdown

    S3(config-if)#inter fa 0/6

    S3(config-if)#switchport mode access

    S3(config-if)#switchport access vlan 30

    % Access VLAN does not exist. Creating vlan 30

    S3(config-if)#no shutdown

    S3(config-if)#vtp mode client

    Setting device to VTP CLIENT mode.

    S3(config)#vtp domain CCNA

    Domain name already set to CCNA.

    S3(config)#vtp pass cisco

    Setting device VLAN database password to cisco

    S3(config)#inter fa0/3

    S3(config-if)#switchport mode trunk

    S3(config-if)#switchport trunk native vlan 99

    S3(config-if)#no shutdown

    S3(config-if)#inter fa 0/6

    S3(config-if)#switchport port-securityS3(config-if)#switchport port-security maximum 1

    S3(config-if)#switchport port-security mac-address sticky

    S3(config-if)#inter fa 0/11

    S3(config-if)#switchport port-security

    S3(config-if)#switchport port-security maximum 1

    S3(config-if)#switchport port-security mac-address sticky

    S3(config-if)#inter fa 0/18

    S3(config-if)#switchport port-security

    S3(config-if)#switchport port-security maximum 1

    S3(config-if)#switchport port-security mac-address sticky

    S3(config)#inter vlan 99

    S3(config-if)#ip add 172.17.99.33 255.255.255.0

    S3(config-if)#no shutdown

    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to up

  • 5/26/2018 CAPITULO 3-4

    66/67

    PING PC1 A PC4

    PING PC2 A PC5

  • 5/26/2018 CAPITULO 3-4

    67/67

    PING PC3 A PC46