Catalogo de Material Deportivo 3

7/30/2019 Catalogo de Material Deportivo 3

1/40


2/40www.gillathletics.com [email protected]

Sand Trap Systems & Covers ............2-4

Take-Off Boards...................................5-6

Circles & Toeboards .........................7-10

Discus & Hammer & Shot Cages 11-19

Vault Boxes .......................................20-21

Steeplechase .....................................22-23

Infield Installations ..........................24-25Track Curbing

VersaCom Boxes

Football/Combination Goals ........26-30

FootBall/Soccer ValuePacks .................31

Soccer Goals & Accessories .........32-35

Field Hockey/Lacrosse Goals/Seating ......................................................36

Ball Stops .................................................37

TABLE OF CONTENTS

Why Specify Gill...

Market Position

Gill Athletics

is the worlds largest manufacturer of outdoor construction-relatedathletic equipment. Most coaches will select a Gill product if given a choice. Since1918 we have been designing and building products that make the staging of athleticevents safer, more accurate and more expeditious.

PrecisionGill construction products are built to exacting standards. We go to painstakinglengths to make products to the precise specifications of the NFHS, NCAA andIAAF. Gill Athletics currently has more IAAF certified products than any othermanufacturer.

InnovationMany Gill products are unique. Other manufacturers cannot supply them becausethey are exclusive. One example of this would be the Skydex Soft Vault Box. This

one of a kind product represents a quantum leap forward in pole vault safety.

ReputationThe name Gill is synonymous with service. When we say a product is warranted for10 years, we mean it. We have been proving our commitment of service to custom-ers for almost 90 years. Service is the central value upon which our reputation hasbeen built.

ConvenienceOur products are made with consideration for those who will specify, install and usethem. This catalog, our Facility Planning CD and the gillathletics.com website all existsolely to make our products the easiest and most convenient for design, construc-tion and maintenance professionals to use.

Specify the best in 2011..Specify Gill!

601 Mercury DriveChampaign, IL 61822

TRACK& FIELD FACILITYFIXTURES CD &

ONLINE SUPPORT INFORMATION

Perfect for planning of outdoor multi-use athletic facilities. The Gill Athletics Facility

Fixtures CD is available upon request. This is the complete technical reference for

sports facility architects, track designers, contractors and developers. Complete with

detailed CAD drawings and installation guidelines. Drawings also available online at

www.gillathletics.com/facility.

Contact us at: [email protected]

WELCOMEWELCOMEPRICES PUBLISHED IN THIS

CATALOG EFFECTIVE

OCTOBER 1, 2010 THROUGH

SEPTEMBER 30, 2011

INDEX

Gill Athletics and Porter Athletic are trademarks

of Gill Athletics, Inc.

A Litania Sports Group Company


3/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 1

NCAA DIVISION I

Arkansas State UniversityBaylor UniversityCollege of William and MaryColorado State UniversityDrake University (IAAF Facility)East Carolina UniversityEastern Illinois UniversityEastern Kentucky UniversityFlorida Atlantic UniversityHigh Point UniversityJohns Hopkins UniversityIllinois State UniversityIowa State UniversityMiddle Tennessee State UniversityMississippi State UniversityNorthern Illinois UniversitySouth Dakota StateTexas State UniversityUniversity of ColoradoUniversity of HawaiiUniversity of IllinoisUniversity of IowaUniversity of KansasUniversity of LouisvilleUniversity of NebraskaUniversity of Northern ColoradoUniversity of Northern IowaUniversity of Oregon (IAAF Facility)University of South Florida

University of TulsaWake Forest UniversityWashington State UniversityWestern Carolina UniversityWestern Illinois University

NCAA DIVISION II

Bellarmine UniversityCal State-StanislausColorado School of MinesColorado State University-PuebloFayetteville State UniversityGrand Valley State UniversityMesa State CollegeMSU-MankatoNorthwestern CollegeOklahoma Baptist University

Southern Illinois-EdwardsvilleSt. Martins UniversityWestern Oregon University

NCAA DIVISION III

Anderson UniversityBenedictine UniversityBethany CollegeCarroll CollegeCarthage CollegeCentral College

Christopher Newport UniversityFranklin CollegeGeorge Fox UniversityGreenville CollegeGrinnell CollegeHardin Simmons UniversityIllinois Wesleyan UniversityJuniata CollegeKnox CollegeLake Forest CollegeLinfield CollegeMacalester College (MN)-indoorMarietta CollegeMessiah CollegeNorth Central CollegePacific UniversitySt. Olaf CollegeTrine UniversityUniversity of WI-Parkside

University of Dubuque (IA)University of St. ThomasUniversity of Wisconsin-La CrosseWheaton College (IL)

NAIA

Adrian CollegeAshford UniversityAzusa Pacific UniversityConcordia CollegeDickinson State UniversityFresno Pacific UniversityMarian UniversityOlivet Nazarene UniversitySoka UniversitySouth Western CollegeSterling College

COMMUNITY COLLEGE

Barton County CCCowley County CCGlendale CCIowa Western CCLane CCLas Positas CollegeMonterey Peninsula CollegeRend Lake CollegeSan Mateo City CollegeSanta Barbara City CollegeSanta Monica City CollegeSouthwest Mississippi CCSouthwestern Oregon CC

OTHER FACILITIES

South Lake Tahoe, Olympic Trials FacilityWest Seattle StadiumWinona Community Track

HIGH SCHOOL

Ayala HS (Chino Hills, CA)Barrington HS (IL)Carlsbad HS (CA)Chino Hills HS (CA)Chino HS (CA)Davis Sr HS (CA)Delphi HS (IN)Don Lugo HS (Chino, CA)King Kamehameha Schools (HI)Madison Sr HS (LA)Mahomet-Seymour HS (IL)Montgomery Academy (AL)Mira Mesa HS (San Diego, CA)North Central HS (Indianapolis, IN)Raymore-Peculiar MS (MO)San Diego HS (CA)St. Marks School of Texas (Dallas, TX)St. George Ind. School (TN)Staley HS (KS)Summit High School (Bend, OR)Terra Nova HS (CA)Union County HS (KY)

TRACK& FIELD FACILITIESFEATURING GILL EQUIPMENT

University of Oregon

Eugene, Oregon

Santa Barbara City College

Santa Barbara, California



SAND TRAP SYSTEMSSAND TRAP SYSTEMS

LJ/TJ SAND PIT FORM

GENERAL DESCRIPTION:

This prefabricated LJ/TJ Sandpit Form is designed to facilitate easy

set up and convenient concrete pour. Save time and money with

this product and take the guess work out of onsite fabrication. This

form is made of specially folded 1/8 aluminum to maximize integrity

and rigidity. This item meets NFHS, NCAA, and IAAF specifications.

The F400 form is designed for NCAA and IAAF dimensions of

29 x 99. The F400M form is designed for NCAA and IAAF

dimensions of 26 x 99. The F400HS form is designed for NFHS

dimensions of 23 x 99.

MATERIAL SPECIFICATIONS:

5052 Aluminum (Ultimate 28ksi, Yield 13ksi)

CONSULTATION:

Sand pit forms should be installed with some form of drainage system.The absence of a drainage system can result in oversaturation of thesand and consequently an unsafe landing surface. It is recommendedthat a facility have at least two LJ/TJ landing pits. Runways should beplaced in close proximity and parallel to each other. IAAF specifiesthat fill sand should consist of washed river sand or pure quartz sand,without organic components, maximum 2mm granules, of which notmore than 5%in weight is less than 0.2mm.

PRICING:

F400 LJ/TJ Sand Pit Form

(Inside Dimensions: 29 x 99) . . . . . . . . . . . . . . . . . $4,872.00

F400M LJ/TJ Sand Pit Form


F400HS LJ/TJ Sand Pit Form; High School


LJ/TJ SAND PIT FORMW/LEDGEFOR COVER


Similar to the F400 series, the F420 Sandpit Form with Ledge

includes prefabricated ledges designed to hold the Gill Aluminum

Sand Pit Cover. Save time and money with this product and take the

guess work out of onsite fabrication. This form is made of specially

folded 1/8 aluminum to maximize integrity and rigidity. This item

meets NFHS, NCAA, and IAAF specifications.

Designed to accommodate the 730148 Gill Aluminum pit cover.


29 x 99. The F420M form is designed for NCAA and IAAF

dimensions of 26 x 99. The F420HS form is designed for NFHS

dimensions of 23 x 99.

MATERIAL SPECIFICATIONS:5052 Aluminum (Ultimate 28ksi, Yield 13ksi)

CONSULTATION:

Sand pit forms should be installed with some form of drainage system.

The absence of a drainage system can result in oversaturation of the

sand and consequently an unsafe landing surface. It is recommended

that a facility have at least two LJ/TJ landing pits. Runways should be

placed in close proximity and parallel to each other. IAAF specifies

that fill sand should consist of washed river sand or pure quartz sand,

without organic components, maximum 2mm granules, of which not

more than 5%in weight is less than 0.2mm.

PRICING:

F420 LJ/TJ Sand Pit Form w/Ledge


F420M LJ/TJ Sand Pit Form w/Ledge


F420HS LJ/TJ Sand Pit Form w/Ledge; High School


F400F40

M



F440

LJ/TJ SAND PIT FORMW/SAND CATCHER


This LJ/TJ Sandpit Form with Sand Catcher is the deluxe version of

LJ/TJ sand pits. Featuring all the specifications of the F400 and F420

series, this prefabricated sandpit form comes complete with a sand

catcher system that allows sand to be conveniently stored when the

pit is covered and quickly returned to the pit for competition. This

item meets NFHS, NCAA, and IAAF specifications.

Designed to accommodate the 730148 Gill Aluminum Pit Cover.


2973/8 x 99. The F440M form is designed for NCAA and IAAF

dimensions of 2673/8 x 99. The F440HS form is designed for

NFHS dimensions of 2373/8 x 99.



PRICING:

F440 LJ/TJ Sand Pit Form w/Ledge and Sand Trap

(Inside Dimensions: 2973/8 x 99) . . . . . . . . . . . . . $15,215.00

F440M LJ/TJ Sand Pit Form w/Ledge and Sand Trap

(Inside Dimensions: 2673/8x 99) . . . . . . . . . . . . . $14,057.00

F440HS LJ/TJ Sand Pit Form w/Ledge and Sand Trap; High School


LJ/TJ SAND TRAP COVER SYSTEM


For pre-installed LJ/TJ sand pits, the LJ/TJ Sand Trap Cover System

can be utilized for sand storage and removal. This product is

fabricated from galvanized steel bar grating with a perforated rubberoverlay. Each unit measures 18 x 36 x 15/8 and lifts easily for

sand removal. The sand trap covers require a ledge around the

perimeter of the sand trap trench to rest on. The installer may have

to make one or more field cuts to ensure the covers properly fit the

customers sand trap trench.


Steel Grate 1 x 18 x 36 Hot Dipped Galvanized

PRICING:

730149 LJ/TJ Sand Trap Cover System

(18 x 36 x 15/8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$160.00

LJ/TJ DOUBLE ENTRYSAND PIT FORM


This Double Entry Sand Pit Form allows for two LJ/TJ runways to

utilize the same sand pit. Save space, time and money. This item

meets NFHS, NCAA, and IAAF specifications.

Designed to accommodate the 730148 Gill Aluminum Pit Cover.

The F440DE form is designed for NCAA and IAAF dimensions of

2973/8 x 99. The F440MDE form is designed for NCAA and IAAF

dimensions of 2673/8 x 99. The F440HSDE form is designed for

NFHS dimensions of 2373/8 x 99.



PRICING:

F440DE LJ/TJ Double Entry Sand Pit Form


F440MDE LJ/TJ Double Entry Sand Pit Form(Inside Dimensions: 2673/8 x 99) . . . . . . . . . . . . . $13,607.00

F440HSDE LJ/TJ Double Entry Sand Pit Form; High School


730149



730148

LJ/TJ SAND PIT COVER


This LJ/TJ Sand Pit Cover is fabricated from extruded aluminum

seat plank. The ideal cosmetic cover for your LJ/TJ sand pits.Three planks per panel are securely welded together in a frame

of 23/8 x 1 x 3/16 aluminum angle. Each panel comes with four

retractable handles for easy installation and removal. A 2 wide

supporting recess is required on each side wall for the panels. This

recess is not required on the end walls. Manufacturing begins upon

receipt of form 730148-2 (field check guide). A typical sand pit

requires 10-11 cover panels.


6063-T6 Aluminum (Ultimate 35ksi, Yield 31ksi)

CONSULTATION:

When not using a Gill pre-fabricated sand pit form, it is important toinclude a 2 ledge along the sides of the sand pit to accommodate

the 730148 sand pit cover.

PRICING:

730148 LJ/TJ Sand Pit Cover . . . . . . . . . . . . . . . . . . . . . . . . .$27.25/sq ft

PORTABLE SAND PITW/CATCHER


This Portable Sand Pit with Catcher is a portable above ground

sand pit designed for use with a raised runway (not included). Theassembled inside dimensions of the F450 are 2311 x 98. Modular

units bolt together to create a sand pit and come apart for storage.

Excellent addition to any indoor facility needing a temporary LJ/TJ

Sand Pit.



PRICING:

F450 Portable Sand Pit w/Catcher (not shown) . . . . . . . . $11,056.00

SAND CATCHER TUBS


Use the sand catcher tubs inside your sand trap system for easy

storage and replacement of LJ/TJ pit sand before, during and after

each use.

PRICING:

F44001 Sand Catcher Tubs (11 x 17 x 8) . . . . . . . . .$139.00/set of 6

SAND TRAP SYSTEMSSAND TRAP SYSTEMS

730149



NCAA ADJUSTABLE TAKE-OFF

BOARD SYSTEM


This Adjustable Take-Off Board System consists of an aluminum tray

assembly, a steel leveling board, and separate replaceable take-offand foul boards. The steel leveling board makes this one of a kind

product faster and easier to adjust horizontally and vertically with

the turn of a wrench. The tray is fabricated from an aluminum sheet

and angle which is securely welded together. The tray is designed to

be incorporated into runways and holds the take-off and foul boards

flush with the runway surface.

The leveling board is fitted with six adjustable feet and two lateral

constraint adjustments to eliminate any motion in the tray and

ensure a flush fit for the take-off and foul boards. Wood take-off

and foul boards are fabricated from MDO plywood, sealed and

painted with outdoor enamel coating. Synthetic take-off boards are

polyurethane with a plywood backing. This product meets NFHS and

NCAA specifications. Powder coating available for an additional 10%.

Replacement parts available.


Base Board . . . . . . . . . . . . . A513 Steel (Ultimate 55.1ksi, Yield 29.7ksi)

Tray . . . . . . . . . . . . . . 3003-H14 Aluminum (Ultimate 22ksi, Yield 21ksi)

CONSULTATION:

When it comes to take-off boards (and runways), more is better. The

long jump and triple jump events tend to be real bottlenecks in the

schedule of a track meet. Thirty jumpers on one runway means that

each jumper will have over half an hour between jumps. This is not

conducive to performance and is certainly not fan friendly.

NCAA rule allows for two take-off boards per gender for the triple

jump and one board per gender in the long jump. Board placement

must be not less than 1m or greater than 3m from the landing pit

for the long jump and at least 11m for men and 8.5m for women for

the triple jump. NCAA rule also mandates that there be a minimum

runway length of 40m from the nearest edge of the take-off board.

PRICING:

4350 NCAA Take-Off System-Wood . . . . . . . . . . . . . . . . . . .$873.00

4350S NCAA Take-Off System-Synthetic . . . . . . . . . . . . . . . $1,013.00

IAAF ADJUSTABLE TAKE-OFF

BOARD SYSTEM


This Adjustable Take-Off Board System consists of an aluminum tray

assembly, a steel leveling board, and separate replaceable take-offand foul boards. The steel leveling board makes this one of a kind

product faster and easier to adjust horizontally and vertically with

the turn of a wrench. The tray is fabricated from an aluminum sheet

and angle which is securely welded together. The tray is designed to

be incorporated into runways and holds the take off and foul boards

flush with the runway surface.

The leveling board is fitted with six adjustable feet and two lateral

constraint adjustments to eliminate any motion in the tray and

ensure a flush fit for the take-off and foul boards. Take-off and foul

boards are fabricated from MDO plywood, sealed and painted with

outdoor enamel coating. Synthetic take-off boards are polyurethane

with a plywood backing. This product meets NFHS, NCAA, and

IAAF specifications. IAAF certified. Powder coating available for an

additional 10%. Replacement parts available.


Base Board . . . . . . . . . . . . . A513 Steel (Ultimate 55.1ksi, Yield 29.7ksi)


PRICING:

43501 IAAF Take-Off System-Wood . . . . . . . . . . . . . . . . . . . .$899.00

4350

TAKE-OFF BOARDS

4350

TAKE-OFF BOARDS



441T

HIGH SCHOOL TAKE-OFF BOARD SYSTEM


Designed to facilitate faster, more efficient use. System consistsof an aluminum tray, aluminum leveling board, and a 19 wide

replaceable wood or synthetic take-off board. Meets High School

specifications. Powder coating available for an additional 10%.



Base Board . . . . . . . . . .6063-T6 Aluminum (Ultimate 35ksi, Yield 31ksi)


CONSULTATION:

NFHS rules allow for up to a 24 width take-off board. Although

this may seem like a beneficent allowance, in actuality it often results

in the jumper taking off farther from the foul line. The 8 width

take-off board used at collegiate and international competition

levels will facilitate take-offs closer to the foul line and consequently

longer jumps.

NFHS recommends long jump board placement of 8 (foul line to sand

pit) for girls and 12 for boys. Recommendations for the triple jump are

24 for girls and 32 for boys.

PRICING:

441T HS Take-Off System-Wood. . . . . . . . . . . . . . . . . . . . . . .$503.00

441TS HS Take-Off System-Synthetic . . . . . . . . . . . . . . . . . . . .$480.00

COLLEGE TAKE-OFF BOARD SYSTEM


Redesigned to facilitate faster, more efficient use. System consists ofan aluminum tray, aluminum leveling board, and an 8 wide replaceable

wood or synthetic take-off board. Meets NCAA and High School

specifications. Powder coating available for an additional 10%.



Base Board . . . . . . . . . . . . . 3003 Aluminum (Ultimate 16ksi, Yield 6ksi)


PRICING:

444 College Take-Off System-Wood . . . . . . . . . . . . . . . . . . .$413.00

444S College Take-Off System-Synthetic . . . . . . . . . . . . . . . .$495.00

444

TAKE-OFF BOARDSTAKE-OFF BOARDS



362

ALUMINUM CIRCLESW/CROSS BRACING


This Aluminum Circle with Cross Bracing is designed to be

incorporated into concrete to form a (19mm) deep depressed

pad. The circle consists of two half sections fabricated from 3 x

aluminum flat strip with x 1 aluminum angle cross-bracing.

These sections are bolted together prior to installation. This circle

meetsNFHS, NCAA, and IAAF specifications. Dimensions inbrackets are in centimeters. Available in a white powder coat finish

for an additional 10%.


Rim . . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)Spokes . . . . . . . . . . . . . .6063-T5 Aluminum (Ultimate 21ksi, Yield 15ksi)

PRICING:

366 Shot/Hammer Circle . . . . . . . . . . . . . . . . . . . . . . . . . . .$557.00

367 Discus Circle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$573.00

ALUMINUM SHOT/HAMMER CIRCLE


This Aluminum Shot/Hammer Circle consists of 1 x x aluminum angle that is roll bent to a 42 (107mm) radius. Four arcs

of chord length 593/8 form the circle. To assemble and secure the

ring, (.64cm) holes are located at the center and ends of each arc.



CONSULTATION:

NFHS rules require that projecting lines, 2 wide and 8 long lying

on the diameter and outside the circumference, shall be used todesignate the back half of the throwing circle.

PRICING:


370

3751

ALUMINUM DISCUS CIRCLE


This Aluminum Discus Circle consists of 1 x x aluminum

angle roll bent to a 497/32 radius. Four arcs of chord length 625/8

form the circle. To assemble and secure the circle, diameter

mounting holes are located at the center and ends of each arc.



CONSULTATION:NFHS rules require that projecting lines, 2 wide and 8 long, lyingon the diameter extended and outside the circumference shall beused to designate the back half of the throwing circle. It is also

required that a 34.92 degree sector shall be marked on the groundand drawn from the center of the throwing circle.

PRICING:

370 Discus Circle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.00

ALUMINUM THROWING CIRCLE FORMS


Aluminum throwing circle is a four part bolt together form that is

adaptable for a variety of in-ground installation practices. Drainage

can be easily incorporated. Aluminum exterior bracing creates a

strong frame yet leaves the center open for the smoothest pour and

crack-resistant finish. Outer frame is 2 x 3 aluminum angle. Inner

circle is x 3 flat aluminum bar. Drainage tube not included.

PRICING:

3741 Shot/Hammer Circle Form . . . . . . . . . . . . . . . . . . . . $1,400.00

3751 Discus Circle Form . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,820.00

CIRCLES

HAMMER CONVERSION CIRCLE


The Hammer Conversion Circle is designed to be installed in an

existing discus circle to convert it for the hammer throw. This allows

single circle hammer cages to be used for both hammer and discus

competition. The circle is molded out of a stiff but pliable PVC

plastic. Dropped hammers will not bounce off of or damage it. The

circle consists of four interlocking sections that form a solid, rattle

free ring which is easily installed and removed. The circle is compliant

with NCAA specifications for conversion circles.

PRICING:

362 Hammer Conversion Circle . . . . . . . . . . . . . . . . . . . . . .$752.00

NEW



372

373

375

Profile for 375

ALUMINUM SHOT CIRCLE


This Aluminum Shot Circle consists of three 1 x x aluminum

angle sections roll bent to an 42 radius. To facilitate mounting on

a new or existing flat concrete pad, diameter holes are located

at each end and center of each of the three sections. The toeboard

brackets are provided for screw fastening to a synthetic toeboard.

Wedge anchor bolts are provided.


6063-T52 Aluminum (ultimate 21ksi, yield 15ksi)

PRICING:

372 Aluminum Shot Circle . . . . . . . . . . . . . . . . . . . . . . . . . .$170.00

POWDER COATED STEEL SHOT CIRCLE


This Steel Shot Circle consists of two flat segments that are installed

end to end to form a seven foot circle. Each segment is roll bent out

of x 1 steel strip to a radius of 42 This product is designed

to be bolted to the surface of a new or existing level pad. Mounting

holes are punched at the ends of each segment for SS wedge

anchors which are provided. Circle sections are finished with a

baked on white powder coat paint. This circle is compliant with

NFHS, specifications for high schools.


1018 CR Steel (ultimate 64ksi, yield 54ksi)

CONSULTATION:

This circle should be used only for high school facilities. NCAA rule

specifies that circle height must be 19mm (+/- 6mm). The 373 circle is

6mm in height and so should not be specified for collegiate facilities.

The 373 is a 360 degree circle and may only be used with a toe

board allowing for passage of the circle under the board. The Gill

359 and 364 toeboards accommodate this design.

PRICING:

373 Powder Coated Steel Shot Circle . . . . . . . . . . . . . . . . .$211.00

CIRCLES & TOEBOARDSCIRCLES & TOEBOARDS

371Profile for 371 & 373

ALUMINUM CIRCLESW/2 ANGLE PROFILE


This Aluminum Circle is designed to be incorporated into the

concrete to form a deep depressed pad. The circle consists

of two half sections fabricated from 2 x 2 x aluminum

square corner angle. This circle meetsNFHS, NCAA, and IAAF

specifications. Available in a white powder coat finish for an

additional 10%.


6063-T52 Aluminum (ultimate 21ksi, yield 15ksi)

PRICING:


375 Discus Circle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$364.00

POWDER COATED STEEL DISCUS CIRCLE


This Steel Circle consists of three flat segments that are installed

end to end to form an 827/16 circle. Each segment is roll bent out

of steel strip to a radius of 497/32. This product is designed to be

bolted to the surface of a new or existing level pad. Nine SS wedge

anchor bolts are provided to fasten the circle to a concrete pad. If

flat head anchors are used, mounting holes will have to be counter

sunk. Circle sections are finished with a baked on white powder

coat paint. This circle is compliant with NFHS, specifications for

high schools.MATERIAL SPECIFICATIONS:

1018 CR Steel (ultimate 64 ksi, yield 54ksi)

CONSULTATION:

This circle should be used only for high school facilities. NCAA rule

specifies that circle height must be 19mm (+/- 6mm). The 371 circle is

6mm in height and so should not be specified for collegiate facilities.

PRICING:

371 Powder Coated Steel Discus Circle. . . . . . . . . . . . . . . .$229.00



363

364 & 373

364

CAST ALUMINUM TOEBOARDFOR

DEPRESSED PAD

GENERAL DESCRIPTION:This Cast Aluminum Toeboard is designed to be used with a

depressed throwing surface formed by an aluminum shot circle

embedded in the concrete pad. Gill aluminum toeboards are cast

from aluminum alloy with a wall thickness of5/16. All aluminum

toeboards are finished with a durable white powder coat paint.

This toeboard meets all NFHS, NCAA, and IAAF requirements.


ALMAG 535 Cast Aluminum (Ultimate 38ksi, Yield 20 ksi)

PRICING:

363 Aluminum Shot Toeboard for Depressed Pad . . . . . . . .$431.00

CAST ALUMINUM TOEBOARDFOR LEVEL PAD


This Cast Aluminum Toeboard is designed to be used on a level

throwing surface with a Gill 373 Steel Shot Circle. This toeboard

can also be mounted over a 2 wide painted circle. Gill aluminum

toeboards are cast from aluminum alloy with a wall thickness of5/16.

All aluminum toeboards are finished with a durable white powder

coat paint. This toeboard meets all NFHS requirements for high

school use.


ALMAG 535 Cast Aluminum (Ultimate 38ksi, Yield 20 ksi)

CONSULTATION:

This 364 toeboard should be used only for high school facilities. NCAA

rule specifies that circle height must be 19mm (+/- 6mm). The 364 is

designed to accommodate a 6mm (1/4) height (surface-mounted) circle

and so should not be specified for collegiate facilities.

PRICING:

364 Aluminum Shot Toeboard for Level Pad. . . . . . . . . . . . .$431.00

SYNTHETIC SHOT TOEBOARD


This Synthetic Toeboard is designed to be used on a level throwing

surface with the Gill 372 Aluminum Shot Circle or the Gill 373

Steel Shot Circle. Optionally, a painted white line may be used to

designate the throwing circle. The toeboard is fabricated from low

density polyethylene. This toeboard meets all NFHS requirements

for high school use.

CONSULTATION:

NFHS rules require that a 34.92 degree sector is marked on the

throwing surface with 2 width lines originating in the center of the

circle and extending through the extremities of the toe board (and

continue out to form an area into which legal puts must be made.

PRICING:

359 Synthetic Shot Toeboard . . . . . . . . . . . . . . . . . . . . . . . . .$261.00

SYNTHETIC SHOT TOEBOARDFOR

DEPRESSED PADS


The Synthetic Toeboard is designed to be used with a3/4 depressed

throwing surface formed by an aluminum shot circle embedded

in the concrete pad. The toeboard is fabricated from low density

polyethylene with a wall thickness of . This toeboard meets all

NFHS, NCAA and IAAF requirements.

PRICING:

358 Synthetic Shot Toeboard for Depressed Pad . . . . . . . . .$261.00

SYNTHETIC SHOT TOEBOARD


8>G8A:ID:7D6G9

8DBE6I>7>A>IN

CIRCLES

TOEBOARDS

366

369

372

373

374

358 359 363 364

3741



INDOOR SHOT/WEIGHT THROWCIRCLE


These three Indoor Shot Put/Weight Throw portable circle items are

meant to be utilized together. Wood screws are provided to attach

the toeboard (3680) to the circle (368), while this all attaches to

the throwing surface (3681). This Indoor Throwing Circle is built in

accordance with NCAA specifications. It consists of two sections of

plywood crescents joined on each side by 6 plated steel strap

hinges. Four inch plated steel chest handles are located adjacent to

the four corners of the circle board. The handles lift up for transport

and fold away for storage. The board is coated with medium gray

enamel paint and marked with white stripes designating the throwing

arc orientation. Overall surface covered is 8 x 8 square. The Wood

Shot Indoor Toeboard is fabricated from select yellow pine and

sealed with two coats of white enamel paint. The Throwing Surfaceconsists of three pieces of 7-ply birch plywood that fastens to the

underside of the circle to provide the athlete with a smooth, hard

surface inside the circle.

PRICING:

368 Shot/Weight Throw Circle . . . . . . . . . . . . . . . . . . . . . . .$797.00

3680 Indoor Wood Shot Toeboard . . . . . . . . . . . . . . . . . . . . .$382.00

3681 Shot Throwing Surface . . . . . . . . . . . . . . . . . . . . . . . . . .$274.00

3680

3710

CIRCLES & TOEBOARDSCIRCLES & TOEBOARDS

368

PORTABLE DISCUS CIRCLE PLATFORM


This Portable Discus Circle Platform consists of a 12 x 12 x 2

wood platform and an aluminum discus circle. The wood platform

breaks down into four 8 x 4 sections and four 8 long 2 x 6

stringers. The aluminum discus circle consists of aluminum angle roll

bent to a 497/32 radius.

The wood platform is painted gray. Sector lines are painted white,

2 wide, and set at 34.92 degrees.

The platform and circle are fastened together using hex bolts.

This platform is not meant to be moved while assembled. It is

recommended that the platform be stored laying on a flat even

surface. The panels can be stacked on one another to fit in an

8 x 4 floor space.PRICING:

3710 Portable Discus Platform . . . . . . . . . . . . . . . . . . . . . . $4,101.00



DISCUS CAGESDISCUS CAGES

8030Rolling M eadows H igh SchoolRolling M eadows, Illinois

GILL HS STEEL DISCUS CAGE


The 8030 Steel High School Competition Discus Cage consists of

six painted steel net poles with ground sleeves, a vinyl coated net

support cable to reduce net sage, and a weather treated nylon net.

Each pole stands in a 20 deep ground sleeve. The net is 180 lb test

nylon which has been weather treated for longer life. Eighteen inch

steel flip arms secure the 14 x 56 net at the front two poles with

ground stakes used at the back poles. An optional 8 tall barrier net

is available with attaching hardware.


Ground Sleeves . . . . . . . . . . . . . A513 Steel (Ultimate 42ksi, Yield 30ksi)

Poles . . . . . . . . . . .A513 Powder Coated Steel (Ultimate 42ksi, Yield 30ksi)

Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (180 lb break strength)

CONSULTATION:

While the six pole configuration with the outermost (end) poles

being placed 4-5 from the sector lines provides excellent safety for

a 34.92 degree sector, the perception for the thrower may be that

the cage is overly restrictive. In actuality the throwing window is

identical to that provided by seven or eight pole configurations.

PRICING:

8030 Steel High School Discus Cage . . . . . . . . . . . . . . . . . $2,820.00

M2055 Replacement Net for 8030 (14 x 56) . . . . . . . . . . . . . .$567.00

80302 Barrier Net for 8030 . . . . . . . . . . . . . . . . . . . . . . . . . . .$534.00

GILL HS ALUMINUM DISCUS CAGE


The 8020 Aluminum Extended High School Competition Discus

Cage, consists of seven, 14 tall, rolled aluminum net poles with

ground sleeves, a vinyl coated net support cable to reduce net sag,

and a weather treated nylon net. Hinged net arms, at ground level,

hold the net in place at the front of the cage. Each pole stands in a

30 deep ground sleeve. The net is 180 lb test nylon which has been

weather treated for extended service life. The extended cage is

laid out for the 34.92 degree throwing sector and follows the basic

cage mouth dimensions as illustrated in the NFHS 2007 Rule Book,

Appendix A. The out poles of the cage can be moved inward to a

four foot spacing from the sector lines for inside stadium use. An

optional 8 tall barrier net is available with attaching hardware.

MATERIAL SPECIFICATIONS:Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)


CONSULTATION:

The seven pole configuration of the 8020 discus cage has become

very popular due to its ability to accommodate the 34.92 degree

sector without causing the thrower to feel overly restricted by the

cage layout.

PRICING:

8020 Aluminum High School Discus Cage . . . . . . . . . . . . . $3,429.00

80201A Replacement Net for 8020 (14 x 68) . . . . . . . . . . . . . .$498.00

80202A Barrier Net for 8020 . . . . . . . . . . . . . . . . . . . . . . . . . . .$764.00

Discus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).



HIGH SCHOOL PRO-DOWN DISCUS CAGEW/GROUND SLEEVES


This High School Pro-Down Discus Cage consists of six galvanized

steel upright poles with ground sleeves, five galvanized steel top rungs

to eliminate net sag, and a weather treated nylon net. Each steel pole

is swaged at the top to receive the top rungs. Each pole stands in a

24 deep ground sleeve. The top rungs for a solid frame to supportthe net. The 12 x 63 net is supported by 32 net hooks permanently

attached to the top of the net. The nylon net has breaking strength

of 180 lb and has been weather treated for longer life.


Poles . . . . . . . . . . . . . . . . . . . . .1008 Steel (Ultimate 43.9, Yield 26.1ksi)


CONSULTATION:

The #80401 has been designed to closely meet NFHS specifications

for a discus cage. When planning a facility, it should be understood

that when it comes to discus cages, taller is better. This becomes an

increasingly important factor where out of sector throws have thepotential to land in heavily trafficked areas.

PRICING:

80401 Pro-Down Cage w/ ground sleeves . . . . . . . . . . . . . . $1,426.00

80405 Pro-Down Cage Replacement Net (12 x 63) . . . . . . .$841.00

HIGH SCHOOL PRO-DOWN DISCUS CAGEW/GROUND PLATES


This High School Pro-Down Discus Cage with Surface Plates

consists of six galvanized steel upright poles and surface plates,

five galvanized steel top rungs to eliminate net sag, and a weather

treated nylon net. Each steel tube is swaged at the top to receive

the top rungs. Each pole stands on an 18 square steel surfaceplate. Each surface plate is anchored with four 10 ground spikes.

The upright pole is held in place by an 18 tall internal tube welded

to the plate as well as a 1 diameter ground support pole driven a

foot into the ground through a hole in the plate. A stainless steel

ring clamp secures the upright pole to the support pole. The top

rungs form a solid frame to support the net. The 12 x 63 net is

supported by 32 net hooks permanently attached to the top of the

net. The nylon net has a breaking strength of 180 lb and has been

weather treated for longer life.


Poles . . . . . . . . . . . . . . . . . . . . .1008 Steel (Ultimate 43.9, Yield 26.1ksi)


CONSULTATION:

The 80402 has been designed to closely meet NFHS specifications

for a discus cage. When planning a facility, it should be understood

that when it comes to discus cages, taller is better. This becomes an

increasingly important factor where out of sector throws have the

potential to land in heavily trafficked areas.

PRICING:

80402 Pro-Down Cage w/ ground plates . . . . . . . . . . . . . . . $2,336.00

80405 Pro-Down Cage Replacement Net (12 x 63) . . . . . . .$841.00

80401

DISCUS CAGESDISCUS CAGESDiscus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).



732130University of IllinoisChampaign, Illinois

NCAA ALUMINUM DISCUS CAGES


The NCAA Aluminum Discus Cage consists of eight 5.3m tall, rolled

aluminum net poles with ground sleeves and a weather treatednylon net. Each pole stands in a 36 deep ground sleeve. Galvanized

steel tubes support the net between the first two poles on each

side. Four hinged net arms, at ground level, hold the net in place at

the front of the cage. The net is 340 lb test nylon which has been

weather treated for extended service life and features rear entry

access to the cage. The narrow cage opening greatly reduces the

area outside the landing sector that an errant thrown discus can

land in while not impeding a good throw. This layout is still less

restrictive than the current IAAF cage specifications.


Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)


CONSULTATION:

The position of the outermost (forward) poles must be not less

than 2.85m from the sector lines. Shot put, discus and hammer areas

should be located close to each other, as many athletes compete in

more than one of these events. Close proximity also accommodates

coaching efficiency.

PRICING:

732130 Aluminum NCAA Discus Cage . . . . . . . . . . . . . . . . . $3,918.00

732133 Replacement Net for 732130 (166 x 686) . . . . . . . .$1,144.00

732132 Optional Barrier Net . . . . . . . . . . . . . . . . . . . . . . . . . . .$903.00

IAAF ALUMINUM DISCUS CAGE


The IAAF Stadium Discus Cage consists of nine 5.3m tall, rolled

aluminum net poles with ground sleeves and a weather treatednylon net. Each pole stands in a 90cm deep ground sleeve.

Galvanized steel tubes support the net between the first two poles

on each side. Four hinged net arms at ground level hold the net in

place at the front of the cage. The net is 340 lb test nylon which has

been weather treated for extended service life and features rear

entry access to the cage. This layout meets IAAF requirements for

the 34.92 degree landing sector in a stadium with spectators all the

way around and other events taking place.




PRICING:732140 Aluminum IAAF Discus Cage . . . . . . . . . . . . . . . . . . . $4,707.00

732143 Replacement Net for 732140 (5m x 25m) . . . . . . . . $1,315.60


DISCUS CAGESDISCUS CAGES

EXCLUSIVEEXCLUSIVEREAR ENTRYREAR ENTRY

ACCESS SYSTEMACCESS SYSTEM




732100

NCAA DOUBLE RING HAMMER/DISCUS CAGE


This NCAA Double Ring Hammer/Discus Cage consists of eight

rolled aluminum net poles, two galvanized steel door hinge poles,

and two 7m tall aluminum moveable doors. A ground sleeve kit is

sold separately. The main net is 206 x 113 and features rear entryaccess to the cage. The door net is 23 x 148. Both nets are

749 lb test knotted nylon and have been weather treated for

extended service life. This cage is designed to host two circles;

one for the discus competitions, the other one for the hammer

competitions. Per NCAA rules, the net is supported at full cage

height between the door poles and first net support poles.


Ground Sleeves . . . . . . . . . . .1008 Steel (Ultimate 43.9ksi, Yield 26.1ksi)



CONSULTATION:

Two circle (hammer/discus) cages provide increased safety for the

discus throw. Rotating doors allow for a closing down on the

sector. Door position can be adjusted to accommodate heightened

safety for left or right-handed throwers.

PRICING:

732105 NCAA Double Ring Hammer/Discus Cage . . . . . . . $23,103.00

732106 Replacement Main Net for 732105 . . . . . . . . . . . . . . $6,910.00

732102 Replacement Door Net for 732105 . . . . . . . . . . . . . $1,799.00


73210501 Ground Sleeve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,760.00

NCAA HAMMER/DISCUS CAGE


This NCAA Hammer/Discus Cage consists of six rolled aluminum

net poles, two galvanized steel door hinge poles, and two 7m tall

aluminum moveable doors. A ground sleeve kit is sold separately.

The main net is 206 x 968 and features rear entry access to the

cage. The door net is 23 x 148. Both nets are 749 lb test knotted

nylon and have been weather treated for extended service life.

With a discus circle installed in the cage and a Gill 362 Hammer

Conversion circle, this cage can be used for both hammer and discus

competitions. The suggested layout complies with 2007 NCAA rules.





CONSULTATION:

NCAA rule requires hammer cage doors to be a minimum of

6.15m in height. When choosing a hammer cage it is important torecognize that the most critical safety factor is door height. Stated

simply, taller is better. If budgets allow, hammer cages with taller

doors should be considered.

PRICING:

732100 NCAA Hammer/Discus Cage . . . . . . . . . . . . . . . . . $21,924.00





University of Illinois

Champaign, Illinois

HAMMER/DISCUS CAGESHAMMER/DISCUS CAGES






732200

NCAA TALL HAMMER/DISCUS CAGE


This NCAA Tall Hammer/Discus Cage consists of six rolled

aluminum net poles, two galvanized steel door hinge poles, and

two 8m tall aluminum moveable doors. A ground sleeve kit is sold

separately. The main net is 236 x 968 and features rear entryaccess to the cage. The door net is 263 x 148. Both nets are


extended service life. With a discus circle installed in the cage and a

Gill 362 Hammer Conversion circle, this cage can be used for both

hammer and discus competitions. The suggested layout complies

with 2007 NCAA rules.





CONSULTATION:

NCAA rule requires hammer cage doors to be a minimum of6.15m in height. When choosing a hammer cage it is important to

recognize that the most critical safety factor is door height. Stated

simply, taller is better. If budgets allow, hammer cages with taller

doors should be considered.

PRICING:

732200 NCAA Tall Hammer/Discus Cage . . . . . . . . . . . . . . $25,139.00





University of H awaii

Honolulu, Hawaii

NCAA DOUBLE RING TALLHAMMER/DISCUS CAGE


This NCAA Tall Double Ring Hammer/Discus Cage consists of eight

rolled aluminum net poles, two galvanized steel door hinge poles, and

two 8m tall aluminum moveable doors. A ground sleeve kit is sold

separately. The main net is 236 x 113 and features rear entry accessto the cage. The door net is 263 x 148. Both nets are


extended service life. This cage is designed to host two circles; one for

the discus competitions, the other one for the hammer competitions.

The suggested layout complies with 2007 NCAA rules. Per NCAA

rules, the net is supported at full cage height between the door poles

and first net support poles.





CONSULTATION:Two circle (hammer/discus) cages provide increased safety for the

discus throw. Rotating doors allow for a closing down on the

sector. Door position can be adjusted to accommodate heightened

safety for left or right-handed throwers.

PRICING:

732205 NCAA Double Ring Tall

Hammer/Discus Cage. . . . . . . . . . . . . . . . . . . . . . . . $25,946.00








HAMMER/DISCUS CAGESHAMMER/DISCUS CAGES



UCLA

Los Angeles, Californ ia732215

IAAF TALL HAMMER CAGE


The IAAF Tall Hammer Cage consists of eight rolled aluminum net

poles, two galvanized steel door hinge poles, and 10m tall aluminum

moveable doors. Each pole stands in a 48 deep ground sleeve.

A ground sleeve kit is sold separately. The main net is 10m x 31.1m

and features rear entry access to the cage. The door net is

10m x 2m. Both nets are 340.7kg test knotted nylon and have

been weather treated for extended service life.



Poles & Doors . . . . . . . . . . . . 6063-T6 Aluminum(Ultimate 30ksi,Yield 25ksi)

Net . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (340.7kg break strength)

CONSULTATION:

The IAAF hammer cage was designed to provide adequate safety

for an in-stadium (within the track oval) cage. In accomplishing thislevel of safety, the cage creates an extremely restrictive feel for the

thrower. Such is the compromise necessary for achieving safety for

a within-the-stadium hammer cage.

PRICING:

732215 IAAF Tall Hammer/Discus Cage . . . . . . . . . . . . . . . . $29,085.00



732218 Optional Barrier Net . . . . . . . . . . . . . . . . . . . . . . . . . $1,330.00


SHOT CAGE


This Shot Cage consists of

four net poles with ground

sleeves, a vinyl coated netsupport cable to reduce netsag, and a weather treated

nylon net. Steel poles arefinished with a durable whitepowder coat paint. Each pole

stands in a 20 deep ground sleeve. The net is 340 lb test nylonwhich has been weather treated for longer life. Eighteen inch steelflip arms secure the 14 by 426 net at the front two poles with

ground stakes used at the back poles.



Poles . . . . . . . . . . . . (A513 Powder Coated Steel Ultimate 42ksi, Yield 30ksi)

Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (340 lb break strength)CONSULTATION:

The use of a shot cage is required by neither NFHS nor NCAA

rules. However, with the ever increasing use of the spin technique,a shot cage should be considered. A predominance of throwerschanging from the glide to the spin technique has changed the eventfrom a linear to a rotational venue, resulting in an increase in the

frequency of out of sector throws. This is especially true following

the implementation of the 34.92 degree sector.

PRICING:

805 Steel Shot Cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,796.00

8050 Aluminum Shot Cage . . . . . . . . . . . . . . . . . . . . . . . . . $2,233.00

M2054 Replacement Main Net . . . . . . . . . . . . . . . . . . . . . . . . . .$567.00

HAMMER & SHOT CAGESHAMMER & SHOT CAGESDiscus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).

805



732220

HIGH SCHOOL PORTABLE DISCUS CAGE


This High School Portable Discus Cage is designed to be set up and

removed as needed. The cage consists of six aluminum net poles with

steel bases, weather treated nylon net, and replaceable bungee cords

to secure the net at each base. The steel bases are each furnished

with two 8 wheels, allowing the assembled net poles to be rolled into

position with ease. All steel parts are finished with a durable black

powder coat paint. Pole bases are weighted with five gallon, heavyduty plastic jugs which are to be filled with sand or water. The cage

poles stand 14 tall. The net is #504 knotless, nylon netting with a

breaking strength of over 180 lb.


Bases . . . . . . . . . . . . A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)



CONSULTATION:

The exponential growth of the use of synthetic turf fields at all

levels has generated substantial concern about the compatibility of

these surfaces with the throwing events. This is an evolving area of

expertise, but the UEFA, the European governing body for soccerhas produced guidelines on synthetic turf fields which state that

the staging of the shot put and discus throw on synthetic turf fields

does no serwious damage to the turf. The discus has a stronger

tendency to skip (bounce) when landing on synthetic turf. This

phenomenon should be considered when making cage and landing

area location decisions. NFHS state that the outermost poles should

be positioned 4-5 from the sector line. Increased safety can be

achieved by reducing this distance.

PRICING:

732220 High School Portable Discus Cage. . . . . . . . . . . . . . . $5,790.00

M2055 Replacement Net for 732220 (14 x 56) . . . . . . . . . . . .$567.00

NCAA PORTABLE DISCUS CAGE


This NCAA Portable Discus Cage is designed to be set up and

removed as needed. The cage consists of eight aluminum net poles

with steel bases, weather treated nylon net, and replaceable bungee

cords to secure the net at each base. The steel bases are each

furnished with two wheels, allowing the assembled net poles to be

rolled into position with ease. All steel parts are finished with durable

black powder coat paint. Pole bases are weighted with five gallon,heavy duty plastic jugs which are to be filled with sand or water. The

cage poles stand 5.3m tall. The net is #42A knotless, nylon netting

with a breaking strength of 340 lb test. In practice fields, the front net

poles can be moved out to widen the cage mouth.





CONSULTATION:

The UEFA, the European governing body for soccer has produced

guidelines on synthetic turf fields which state that the staging of the

shot put and discus throw on synthetic turf fields does no seriousdamage to the turf. The discus has a stronger tendency to skip (bounce)

when landing on synthetic turf. This phenomenon should be considered

when making cage and landing area location decisions.

The position of the outermost (forward) poles must be not less

than 2.85m from the sector lines. Position of these poles may be

closer to the sector lines for greater safety (with the permission of

event participants/institutions).

PRICING:

732230 NCAA Portable Discus Cage . . . . . . . . . . . . . . . . . . . $8,750.00

732131A Replacement Net for 732230 (166 x 686) . . . . . . . .$894.00

PORTABLE CAGESPORTABLE CAGESDiscus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).



PORTABLE SHOT CAGE


This Portable Shot Cage is designed to be set up and removed as

needed. The cage consists of four aluminum net poles with steel bases,

weather treated nylon net, and replaceable bungee cords to secure the

net at each base. The steel bases are each furnished with two 8 wheels,

allowing the assembled net poles to be rolled into position with ease.All steel parts are finished with durable black powder coach paint. Pole

bases are weighted with five gallon, heavy duty plastic jugs which are to

be filled with sand or water. The cage poles stand 14 tall. The net is

#42A knotless, nylon netting with a breaking strength of 340 lb test. The

cage can be set up to fit any size sector.





CONSULTATION:

The use of a shot cage is required by neither NFHS nor NCAA rules.

However, with the ever increasing use of the spin technique, a shot cageshould be considered. A predominance of throwers changing from

the glide to the spin technique has changed the event from a linear to a

rotational venue, resulting in an increase in the frequency of out of sector

throws. This is especially true following the implementation of the 34.92

degree sector. The portable shot cage allows for the quick set-up, staging

and take-down of the event. With the exceptional demands being made

of synthetic turf fields these days, portability is essential.

PRICING:

732260 Portable Shot Cage. . . . . . . . . . . . . . . . . . . . . . . . . . . $5,047.00

732261 Replacement Main Net for 732260 (14 x 44) . . . . . . .$527.00

732240M ichael A. Carroll Stadium

Indianapolis, Indiana

IAAF PORTABLE DISCUS CAGE


This IAAF Portable 5m Discus Cage is designed to be set up and

removed as needed. The cage consists of nine aluminum net poles

with steel bases, weather treated nylon net, and replaceable bungee

cords to secure the net at each base. The steel bases are each

furnished with two 8 wheels, allowing the assembled net poles to berolled into position with ease. All steel parts are finished with durable

black powder coat paint. Pole bases are weighted with five gallon,

heavy duty plastic jugs which are to be filled with sand or water. The

cage poles stand 5.1m tall. The net is a #42A knotless, nylon netting

with a breaking strength of 154.2kg test. In practice fields, the front

net poles can be moved out to widen the cage mouth.




Net . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (154.2kg break strength)

CONSULTATION:

The UEFA, the European governing body for soccer has producedguidelines on synthetic turf fields which state that the staging of the

shot put and discus throw on synthetic turf fields does no serious

damage to the turf. The discus has a stronger tendency to skip

(bounce) when landing on synthetic turf. This phenomenon should

be considered when making cage and landing area location decisions.

PRICING:

732240 IAAF Portable Discus Cage . . . . . . . . . . . . . . . . . . . $11,300.00

732141A Replacement Net for 732240 (5m x 25m) . . . . . . . . $1,070.00




NCAA PORTABLE INDOOR CAGE


This NCAA Portable Indoor Weight Cage is designed to be set up

and removed as needed. The cage consists of three aluminum net

poles with steel bases, two aluminum doors with steel bases, and

nylon nets for the cage and the doors. The steel bases are each

furnished with two wheels, allowing the assembled doors and net

poles to be rolled into position with relative ease. All steel parts are

finished with durable black powder paint. Pole bases are weighted

with five gallon, heavy duty plastic jugs which are to be filled with

sand or water. The cage poles stand 14 tall. The nets are 560 lb

test, #72 knotted, nylon netting.MATERIAL SPECIFICATIONS:



Doors . . . . . . . . . . . A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)


732250

Illinois Stat e University

No rmal, Illinois

CONSULTATION:

This cage should be used with the Gill 368 circle and 3681 throwing

circle surface.

PRICING:

732250 NCAA Portable Indoor Cage . . . . . . . . . . . . . . . . . . $9,950.00

732251 Replacement Net for 732250 (14 x 61) . . . . . . . . . . $1,404.00




717

VAULT BOXESVAULT BOXES

500

ALUMINUM VAULT BOX


This Aluminum Vault Box is fabricated from aluminum tempered to a

T6 condition. The sides of the box are cut and folded from1/8 thick

sheets. The box bottom and backstop plates are formed from

plate welded to the sides along the outside edges. The reinforced

backstop prolongs the life of the box. The outer edges of the box

are folded down to eliminate sharp edges. Two outer side wings

secure the box position when placed in concrete. Once installed,

you should never have to remove it. This product meets NFHS,

NCAA and IAAF specifications.



CONSULTATION:

For the pole vault, it is especially important that runways beoriented to take advantage of prevailing wind. The pole vault should

not be placed where prevailing winds are opposing or crossing the

runway. Sun and lighting reflection also are concerns in the vault.

PRICING:

502 Aluminum Vault Box . . . . . . . . . . . . . . . . . . . . . . . . . . . .$397.00

ALUMINUM VAULT BOXLID


Fits the 500, 502 and 505 vault boxes.1/4 supports prevents lid from

sagging. When the 50201 is covered with all weather track material,

the lid will fit flush with the runway surface. The 50202 provides a

flush mount without track material.



PRICING:

50201 Aluminum Vault Box Lid (recessed mount) . . . . . . . . . .$350.00

50202 Aluminum Vault Box Lid (flush mount) . . . . . . . . . . . . .$375.00

CERTIFIED SKYDEX SOFT VAULT BOX


The IAAF certified Skydex Soft Vault Box represents a quantum leap

forward in pole vault safety. This revolutionary new vault box provides

greatly increased safety with no effect on the vaulters experience.

Enhanced safety is accomplished through the integration on Skydex

Smarter Cushioning technology into the design of the vault box without

affecting the feel. Redesigned for easier installation.

CONSULTATION:

The 507 Skydex Vault Box negates the need for a 717 Vault Box

Collar. G-Max rating of this revolutionary product is enhanced by

a factor of four over conventional boxes. Five year warranty on

polymer surface cover.

PRICING:

507 SkydexTM Soft Vault Box . . . . . . . . . . . . . . . . . . . . . . . $1,665.0050701 Vault Box Recessed Cover . . . . . . . . . . . . . . . . . . . . . . .$329.00

507

502

50201

VAULT BOXCOLLARGENERAL DESCRIPTION:

This Vault Box Collar is required by the NFHS for all pole vault

facilities. The 2003 high school rule requiring all hard surfaces to be

covered between vault box and pit is addressed with this vault box

collar. The collar allows for no interference with the pole vault pole

action and the bright yellow color offers a great target for the athlete.

PRICING:

717 Vault Box Collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$234.00

0

5 ft .

10 ft .

15 ft .

20 ft .

No more than 200 Gs when testing in

accordance with ASTM F1292

Peak G:99

Peak G>200

FALL HEIGHT TESTING

VSSKYDEX STANDARD

SKYDEX

STANDARD

VAULT BOX VAULT BOX

17 6

4



50401504

STEEL VAULT BOX


This Steel Vault Box is fabricated of steel with fold and weld

construction. The vault box features flanged edges and flared sides

to prevent damage to the pole and is finished with a white powder

coat finish. This product meets NFHS, NCAA, and

IAAF specifications.


AISI 1011 Steel (Ultimate 53ksi, Yield 30ksi)

PRICING:

500 Steel Vault Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$296.00

UNIVERSAL VAULT BOXLID


This Universal Vault Box Lid is designed to fit over all styles of vault

boxes. Constructed of hot rolled steel with anti-slip surface it is

finished with a durable white powder coat process.

PRICING:

503 Steel Universal Vault Box Lid . . . . . . . . . . . . . . . . . . . . .$255.00

SAFETYMAXVAULT BOXINSERT


Inspired by Olympic medalist and World renowned

pole vault coach, Jan Johnson. Extensive testing shows this design

greatly improves vaulter safety without pole interference. This collar

provides additional protection by padding otherwise exposed hard

surfaces. Patent pending.

PRICING:

720 SafetyMax Vault Box Insert . . . . . . . . . . . . . . . . . . . . . . .$512.00

500

503

505

505SP

CAST ALUMINUM VAULT BOX


This Cast Aluminum Vault Box is made of 100%cast aluminum with

a wall thickness of and a white powder coat finish. The inside

corners are rounded for unhindered pole rotation. This durable

vault box is guaranteed against cracking or warping. This product

meets NFHS, NCAA and IAAF specifications.

MATERIAL SPECIFICATIONS:319.0-F Aluminum (Ultimate 27ksi, Yield 18ksi)

CONSULTATION:

For the pole vault, it is especially important that runways be

oriented to take advantage of prevailing wind. The pole vault should



PRICING:

505 White Cast Aluminum Vault Box . . . . . . . . . . . . . . . . . .$842.00

505SP Orange Powder Coated Cast Aluminum

Vault Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$877.00

STAINLESS STEEL VAULT BOX


This Stainless Steel Vault Box provides wide rounded edges to

prevent poles from being damaged. This is an excellent choice

for warm climates. This product meets NFHS, NCAA, and

IAAF specifications.MATERIAL SPECIFICATIONS:

304L Stainless Steel (Ultimate 81.8ksi, Yield 30.5ksi)

CONSULTATION:

For the pole vault, it is especially important that runways be

oriented to take advantage of prevailing wind. The pole vault should



PRICING:

504 Stainless Steel Vault Box . . . . . . . . . . . . . . . . . . . . . . . . .$665.00

50401 Stainless Steel Vault Box Lid . . . . . . . . . . . . . . . . . . . . . .$453.00



STEEPLECHASESTEEPLECHASE

730146730134

STEEPLECHASE WATER JUMP BARRIERS


This Water Jump Barrier with ground sleeves provides a rigid hurdle

for the water jump. The barrier has a spring loaded top for easy

height adjustment. It adjusts to three heights: 30, 33, and 36 inches.

Includes ground sleeves for in ground installation and is compatible

with the F510 water jump form.

A water barrier seal is required by NCAA rule and IAAF rule, and is

sold separately.


A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)

CONSULTATION:

Sleeve installation for the 730134 water jump barrier is critical.

Barrier height accuracy is dependent on sleeve depth.

PRICING:

730134 Water Jump Barrier-Ground Sleeves . . . . . . . . . . . . . $1,950.00

730145B Water Jump Barrier Seal-Aluminum . . . . . . . . . . . . . . .$487.00

730145V Water Jump Barrier Seal-Vinyl . . . . . . . . . . . . . . . . . . . .$215.00

STEEPLECHASE WATER JUMP COVER


This Steeplechase Water Jump Cover is fabricated from extruded

aluminum seat plank. Three planks per panel are securely welded

together in a frame of aluminum angle. Each panel comes with four

retractable handles for easy installation and removal. The supporting

structure for these panels is fabricated from aluminum tube. Each

main support beam has a supporting leg assembly bolted to it. The

addition or removal of stainless steel washers allow each leg to be

customer fit to its position. Position pins at the front of each beam

engage holes in the front wall support tube to lock them in place.

To ensure a proper fit, production begins only upon receipt of form

730146-3. Measurements in brackets are in centimeters.

The 730146 is designed for a track constructor to apply the

same track surface as on the track for a seamless design.

MATERIAL SPECIFICATIONS:6063-T6 Aluminum (Ultimate 35ksi, Yield 31ksi)

PRICING:

730146 Steeplechase Water Jump Cover . . . . . . . . . . . . . . . . $6,249.00


This Steeplechase Water Jump Barrier for surface mount is

adjustable to three heights: 30, 33, and 36 inches. If needed, it can be

quickly removed and reinstalled. Two steel pins and four clamping

knobs securely lock the barrier in each position. Internal weight

compensation springs and PVC liners separating the inner and outer

leg tubes substantially ease beam height adjustment. The beam is a

square steel tube, covered on three sides with thick Vultraktrack surface.

The leg assemblies are fabricated from round tubular steel. The

leg assemblies bolt securely to half inch thick stainless steel anchor

plates. These plates are secured to the top of the pit wall with four

concrete anchors each. Plates are anchored to new and existing

8 thick walls. For thicker walls, center the plate on the wall. Oval

holes in the leg mounting plates allow for small variations in anchor

plate placement. A 11/8 wrench is required to remove and reinstall

the barrier.

Compatible with F500 waterjump form.

A water barrier seal is required by NCAA rule and IAAF rule , and

is sold separately.


A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)

CONSULTATION:

The 730144A water jump barrier is the best choice when installing a

new barrier in an existing water jump facility. Surface mounting plates

allow for relatively simple placement and installation.

The 730145 provides a seal between the barrier uprights to aid

competitors with depth perception.

PRICING:730144A Water Jump Barrier-Surface Mount . . . . . . . . . . . . . . $2,557.00

730145B Water Jump Barrier Seal-Aluminum . . . . . . . . . . . . . . .$487.00

730145V Water Jump Barrier Seal-Vinyl . . . . . . . . . . . . . . . . . . . .$215.00

STEEPLECHASE WATER JUMP BARRIERS - SURFACE MOUNT



F510F510F500

STEEPLECHASE WATER JUMP FORMS


The Steeplechase Water Jump Form takes the guess work out of

form building. It is prefabricated to meet NFHS, NCAA and IAAF

specifications, which facilitates easy set up and convenient concrete

pour. Structure is made of specially folded 1/8 aluminum to maximize

strength and includes designed inner wall supports that allow the

concrete to flow through and set evenly. This form also is designed

to fit the Gill water jump cover 730146. Drain valve is not included.

The F500 is compatible with 730144A water jump barrier.

The F510 water jump form has integrated ground sleeves and is

compatible with 730134 water jump barrier.

The F50050 valve option includes an installed front wall valve and

is compatible with all Gill steeplechase water jump forms. The only

hook up is the outgoing pipe to the drain source. The valve is easily

accessible for maintenance or replacement.


3003-H14 Aluminum (Ultimate 22ksi, Yield 21ksi)CONSULTATION:

The steeplechase water jump pit may be positioned either inside or

outside the track oval. NCAA recommendation is that it be placed

inside the track. It is mandatory that it be placed on the curve prior

to the finish line. The landing surface inside the water jump should

be composed of non-skid, shock-absorbent material.

PRICING:

F500 Steeplechase Water Jump Form . . . . . . . . . . . . . . . . . $5,109.00

F510 Steeplechase Water Jump Form-Ground Sleeve . . . . . . $5,396.00

F50050 Valve Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$697.00

VALUE PACK500

PACKAGE INCLUDES:

F500 Steeplechase Water Jump Form

730144A Steeplechase Water Jump Barrier-surface

mount version

PRICING:

VPF500 Value Pack500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,490.00

VALUE PACK510

PACKAGE INCLUDES:

F510 Steeplechase Water Jump Form with integrated

ground sleeves

730134 Steeplechase Water Jump Barrier-ground sleeve version

PRICING:

VPF510 Value Pack510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,722.00

F50050 VALVE OPTION GROUND SLEEVE



INTERNATIONAL TRACKCURBING


Heavy gauge aluminum design features a fluted dome-shaped top.

Each section of curbing is notched at one end to allow easy drop in

or removal of section. The curbing is supported by tall ribbed

feet for rapid drainage. Optional pin kit available to help keep the

curbing from shifting on the track. Permanent installation curbing

includes two anchor pins for every 20 section. (Installer to supply

epoxy to anchor pins in place.) Meets NCAA specifications.

IAAF certified.



CONSULTATION:

Track curbing is not required by NCAA rule for the steeplechase

lane. The white line defining the lane to the water jump may bemarked with cones every 4m. Where budgets allow, track curbing

should be incorporated into the track design for the steeplechase.

PRICING:

Non-permanent Installation Curbing851A Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.50/per linear foot

852A Anodized (Gold or Silver) . . . . . . . . . . . . . . . . . $12.50/per linear foot

852P Powder Coated . . . . . . . . . . . . . . . . . . . . . . . . . $10.75/per linear foot

851P Base pins (set of 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $139.00

Permanent Installation Curbing853A Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.50/per linear foot

854A Anodized (Gold or Silver) . . . . . . . . . . . . . . . . . $12.50/per linear foot

854P Powder Coated . . . . . . . . . . . . . . . . . . . . . . . . . $10.75/per linear foot

3-LANE TRACKGATE


This 3 lane track gate effectively discourages joggers and recreational

runners from using the three inside lanes and causing premature anduneven track surface wear. A 24 steel ground sleeve with locking

mechanism is provided for simple lift and rotate operation to allow

training on inside lanes. With the use of a pad lock, the gate can be

secured in position, preventing the gate from being lifted and rotated.

The gate is designed to control traffic on the three inside lanes

yielding reduced surface wear. A set of four gates provides optimal

traffic control and surface protection. Custom colors are available for

a 10%upcharge.



CONSULTATION:Typical track gate placement is at the four straightaway to curve

transition points.

PRICING:

8540 Gill 3-Lane Track Gate . . . . . . . . . . . . . . . . . . . . . .$1,040.00/ea

8540P Track Gate Post Pad . . . . . . . . . . . . . . . . . . . . . . . . . . $49.50/ea

NTERNATIONAL TRACKCURBING


-

851A

INFIELD INSTALLATIONSINFIELD INSTALLATIONS

8540P

8540

Powder-CoatColor Options

NAVY BLUE ROYAL BLUE YELLOW GOLD OLD GOLDLIGHT BLUE DARK GREEN KELLY GREEN REDORANGE MAROON PURPLE WHITE BLACK GRAY SILVER



F91033F900

F92033

F93033

VERSACOM BOX- SYNTHETIC VERSION

GENERAL DESCRIPTION:This VersaCom Box provides a junction for electricity and cable

hookups. This box can be put in virtually any location around

performance areas of varying surfaces. The open bottom of the

VersaCom Box provides adequate drainage and conduit entry,

while the hand holes in the cover allow easy access. Full box has a

divider plate that is also provided to help keep electrical equipment

segregated. The main box structure is made of thick folded

aluminum. The lid is constructed out of1/8 aluminum, reinforced by

angle for maximum support and durability.

This version allows material to be bonded or poured onto the top

of the lid to match the surrounding surface. The F91033 and F93033

versions have black Vultrak bonded to the lid. This addition is usually

for asphalt applications (this material can also be painted).Full - Dimensions: 30 L x 18 W x 14 D w/ wall thickness

Half - Dimensions: 15 L x 18 W x 14 D w/ wall thickness



CONSULTATION:

When installing VersaCom Boxes, there are three things to keep in mind;

location, location and location. The boxes should be installed to provide

optimal proximity to communication, electrical and timing systems.

PRICING:

F910 VersaCom Box - Synthetic Version . . . . . . . . . . . . . . . .$821.00F91033 VersaCom Box - Black Vultrak Factory Installed . . . . . . . . . $971.00

F930 VersaCom Half Box - Synthetic Version . . . . . . . . . . . . .$524.00

F93033 VersaCom Half Box - Black Vultrak

Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$629.00

VERSACOM BOX- FLUSH MOUNT VERSION


The VersaCom box provides a junction for electricity and cable

hookups. The VersaCom Box can be put in virtually any location

around performance areas of varying surfaces. The open bottom

VersaCom Box provides adequate drainage and conduit entry,

while the hand holes in the cover allow easy access. Full box has adivider plate that is also provided to help keep electrical equipment

segregated. This version is designed to sit flush to the surface

without adding any surface material to the box lid.Full - Dimensions: 30 L x 18 W x 1

Catalogo de Material Deportivo 3

Documents

Transcript of Catalogo de Material Deportivo 3