godrej Presentation1
Transcript of godrej Presentation1
-
8/7/2019 godrej Presentation1
1/25
IMPROVING OVERALL
EFFICIENCYOF THE CUTTING MACHINES
BY
IMPLEMENTATION OF PILLARSOF TPM.
-
8/7/2019 godrej Presentation1
2/25
-
8/7/2019 godrej Presentation1
3/25
-
8/7/2019 godrej Presentation1
4/25
PILLAR 1 - JISHU HOZEN (Autonomous maintenance):This pillar is geared towards developing operators to be able to take care of small maintenancetasks, thus freeing up the skilled maintenance people to spend time on more value added activityand technical repairs. The operators are responsible for upkeep of their equipment to prevent it
from deteriorating.
PILLAR 2 KOBETSU KAIZEN:"Kai" means change, and "Zen" means good (for the better). Basically kaizen is for smallimprovements, but carried out on a continual basis and involve all people in the organization.Kaizen is opposite to big spectacular innovations. Kaizen requires no or little investment. The
principle behind is that "a very large number of small improvements are move effective in anorganizational environment than a few improvements of large value. This pillar is aimed atreducing losses in the workplace that affect our efficiencies. By using a detailed and thoroughprocedure we eliminate losses in a systematic method using various Kaizen tools. These activitiesare not limited to production areas and can be implemented in administrative areas as well.
-
8/7/2019 godrej Presentation1
5/25
1 . Easy to implement.2. It can be more cost effective compared to other
three processes.3. Everyone is involved during KK activity i.e. frommanager to shop floor worker
So that every operator gets the feel of experiment4. More operators friendly.5. It can be done with less cost.
-
8/7/2019 godrej Presentation1
6/25
1 . Easy to implement.2. Uninterrupted operation of equipments.3. Flexible operators to operate and maintain
other equipments.4. Eliminating the defects at source through active
employee participation.
-
8/7/2019 godrej Presentation1
7/25
-
8/7/2019 godrej Presentation1
8/25
-
8/7/2019 godrej Presentation1
9/25
-
8/7/2019 godrej Presentation1
10/25
S R.NO. ACTIVITY TIME in min %
1. tti if JO 115 19 .79
2 . M asur m t 83 14 .28
3. Op rator o availability 3 5 4 .30
4 . Cra waiti tim 15 2 .58
5. M/C dow tim 3 13 53.87
6. Tool cha i tim 30 5.16
TOTAL 581 100
-
8/7/2019 godrej Presentation1
11/25
Setting of Job20%
Measurement14%
perator nonavailability
4%Crane Waiting
time3%
M/C Down Time54 %
Tool ChangingTime5%
-
8/7/2019 godrej Presentation1
12/25
M/C Down Time.
Setting Time.Measurement .
-
8/7/2019 godrej Presentation1
13/25
REAS N
Maintenance
S LUTI NPreventive Maintenance of M/C to be done on time toavoid maintenance while M/C is in production.
-
8/7/2019 godrej Presentation1
14/25
REAS NF atigue to perator in Setting the Job.
S LUTI NSensors are to be employed on machine for measurementpurpose.
-
8/7/2019 godrej Presentation1
15/25
REAS NPresently measurement is done manually by operator.New measurement type equipment must be procured tominimize measurement time.
S LUTI NSensors (stops)assembly has to be done near to the
machine blade so measurement time will be minimum.
-
8/7/2019 godrej Presentation1
16/25
-
8/7/2019 godrej Presentation1
17/25
-
8/7/2019 godrej Presentation1
18/25
-
8/7/2019 godrej Presentation1
19/25
S R.NO. ACTIVITY TIME in min %
1. c l / la t a s 98 9 .75
2. tti Tim 17 1.223. tart- L ss s[m ck- ] 288 2 0.52
. Mi r t a [Tim L ss] 20 1.42
5. N Availability f Mat rial 340 24.24
. N Availability f rat r 40 2 .85
T TAL 1403 100
-
8/7/2019 godrej Presentation1
20/25
Scheduled/Planned
Stoppages50%
Setting Time1%
Start-up Loss[mock-up]
21%
Minor Stoppage[Time Loss]
1%
Non Availabilityof Material
24 %
Non Availabilityof perator
3%
-
8/7/2019 godrej Presentation1
21/25
Scheduled/Planned Stoppages.Non Availability of Material.
Start up Loss[mock-up].
-
8/7/2019 godrej Presentation1
22/25
REAS NLoading Time f Plate Is Too High.Time consumed for Setting the Job Plate.
S LUTI NSLoading Time Should Be Minimized By ffline Setting f Plate.Special fixture to be Designed for Quick Setting of Job Plate.
-
8/7/2019 godrej Presentation1
23/25
REAS NImproper & Unplanned Stacking of Plates.
S LUTI NSProper stacking of plates as per priority.Proper proactive planning to feed the m/c as perplan.
-
8/7/2019 godrej Presentation1
24/25
REAS NNo cleaning before perator reports the machine.Major time consumed in Test Run.
S LUTI NSSpecial Cleaning staff to be provided for cleaning of the m/c before operator reports on the m/c duringeach shift.Special F ixture to be made to avoid Test Run.
-
8/7/2019 godrej Presentation1
25/25