QUEMU QUEDA TAL COMO ESTA
Arrastramos las imagens que requerimos routers y switch
Seleccionamos los 2 routers y click derecho sobre uno de ellos y elegimos “configure”
Y nos sale el siguiente menu
Vamos a “slot” y cambiamos donde dice “wic 0” y elegimos WIC-2T
Apply y OK
Luego damos click en “add link”
Damos click sobre alguno de los objetos y nos muestra las interfaces para seleccionar , elegimos y apare automáticamente el cable para conectar a otro objeto a alguna de sus interfaces
Una vez realizados las conexiones damos click en el icono que tiene la forma de un triangulo verde
Al aparecer todos los puntos en verde significa que la estructura esta trabajando con normalidad.
Luego damos click en le botón “console to all device”
Y aparece las siguientes ventanas
Nos percatamos que el rendimiento es pésimo del S.O. por lo cual, primero damos click en el botón “add link” para que vuelva a su icono original, luego selecionamos una de los routers y damos click en “Idle PC” , aparece un cuadro y damos “YES”
Aparece un cuadro como el de la imagen
Damos click en la pestaña y seleccionamos alguno de los números que empiezan con “*” damos aply y luego OK y con esto se reduce el consumo del CPU.
Username: cisco
Password:cisco
R1>enable
Password:class
R1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#interface f0/0
R1(config-if)#
R1 con0 is now available
Press RETURN to get started.
ACCESO RESTRINGIDO - SOLO PERSONAL AUTORIZADO - TODAS LAS CONEXIONES SON REGISTRADAS
banner motd
User Access Verification
Username: cisco1
Password:
R1>R1>
% Unknown command or computer name, or unable to find computer address
R1>R1>Password:
% Unknown command or computer name, or unable to find computer address
R1>% Unknown command or computer name, or unable to find computer address
^
% Invalid input detected at '^' marker.
R1>R1>Password:
% Unknown command or computer name, or unable to find computer address
R1>% Unknown command or computer name, or unable to find computer address
^
% Invalid input detected at '^' marker.
R1>R1>R1>enable
% Unknown command or computer name, or unable to find computer address
R1>% Unknown command or computer name, or unable to find computer address
^
% Invalid input detected at '^' marker.
R1>R1>Password:
% Unknown command or computer name, or unable to find computer address
R1>% Unknown command or computer name, or unable to find computer address
^
% Invalid input detected at '^' marker.
R1>R1>R1#conf term
^
% Invalid input detected at '^' marker.
R1> ^
% Unknown command or computer name, or unable to find computer address
R1>% Invalid input detected at '^' marker.
^
% Invalid input detected at '^' marker.
R1>
R1>R1>Enter configuration commands, one per line. End with CNTL/Z.
^
% Invalid input detected at '^' marker.
R1> ^
% Unknown command or computer name, or unable to find computer address
R1>% Invalid input detected at '^' marker.
^
% Invalid input detected at '^' marker.
R1>
R1>R1>R1(config)#username cisco password cisco
^
% Invalid input detected at '^' marker.
R1> ^
% Unknown command or computer name, or unable to find computer address
R1>% Invalid input detected at '^' marker.
^
% Invalid input detected at '^' marker.
R1>
R1>R1>R1(config)#username cisco1 password cisco1
^
% Invalid input detected at '^' marker.
R1> ^
% Unknown command or computer name, or unable to find computer address
R1>% Invalid input detected at '^' marker.
^
% Invalid input detected at '^' marker.
R1>
R1>
R1>enable
Password:
Password:
R1#disable
R1>
R1 con0 is now available
Press RETURN to get started.
ACCESO RESTRINGIDO - SOLO PERSONAL AUTORIZADO - TODAS LAS CONEXIONES SON REGISTRADAS
banner motd
User Access Verification
Username: cisco
Password:
R1>enable
Password:
R1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#interface f0/0
R1(config-if)#
R1#
*Mar 1 00:40:09.047: %SYS-5-CONFIG_I: Configured from console by cisco on console
R1#
R1#ip address 192.168.1.1 255.255.255.0
^
% Invalid input detected at '^' marker.
R1#enable
R1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#interface f0/0
R1(config-if)#ip address 192.168.1.1 255.255.255.0
R1(config-if)#no shut
R1(config-if)#
*Mar 1 00:43:13.567: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
*Mar 1 00:43:14.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
R1(config-if)#exit
R1(config)#line console 0
R1(config-line)#logg
% Incomplete command.
R1(config-line)#logging syn
R1(config-line)#logging synchronous
R1(config-line)#interface s0
% Incomplete command.
R1(config)#interface s0/0
R1(config-if)#ip address 192.168.2.1 255.255.255.0
R1(config-if)#no shutdown
R1(config-if)#
*Mar 1 00:46:02.807: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
R1(config-if)#
*Mar 1 00:46:03.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
R1(config-if)#
*Mar 1 00:46:26.199: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down
R1(config-if)#
*Mar 1 00:49:56.199: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
R1(config-if)#
R1 con0 is now available
Press RETURN to get started.
*Mar 1 00:56:01.255: %SYS-5-CONFIG_I: Configured from console by cisco on console
Connected to Dynamips VM "R2" (ID 1, type c2691) - Console port
Press ENTER to get the prompt.
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: n
Would you like to terminate autoinstall? [yes]:
Press RETURN to get started!
*Mar 1 00:00:04.347: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0 , changed state to up
*Mar 1 00:00:04.347: %LINEPROTO-5-UPDOWN: Line protocol on Interface IPv6-mpls, changed state to up
*Mar 1 00:00:04.351: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
*Mar 1 00:00:04.355: %LINK-3-UPDOWN: Interface Serial0/1, changed state to up
*Mar 1 00:00:04.359: %LINK-3-UPDOWN: Interface Serial0/2, changed state to up
*Mar 1 00:00:04.363: %LINK-3-UPDOWN: Interface Serial0/3, changed state to up
*Mar 1 00:00:05.351: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
*Mar 1 00:00:05.355: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1, changed state to up
*Mar 1 00:00:05.359: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/2, changed state to up
*Mar 1 00:00:05.363: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/3, changed state to up
*Mar 1 00:00:33.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1, changed state to down
*Mar 1 00:00:33.131: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/2, changed state to down
*Mar 1 00:00:33.139: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/3, changed state to down
*Mar 1 00:01:14.883: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to administratively down
*Mar 1 00:01:15.139: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down
*Mar 1 00:01:15.703: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down
*Mar 1 00:01:15.883: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0/1, changed state to down
*Mar 1 00:01:16.139: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0/0, changed state to down
*Mar 1 00:01:16.703: %LINK-5-CHANGED: Interface Serial0/0, changed state to adm inistratively down
*Mar 1 00:01:16.735: %LINK-5-CHANGED: Interface Serial0/1, changed state to adm inistratively down
*Mar 1 00:01:16.739: %LINK-5-CHANGED: Interface Serial0/2, changed state to adm inistratively down
*Mar 1 00:01:16.743: %LINK-5-CHANGED: Interface Serial0/3, changed state to adm inistratively down
*Mar 1 00:01:19.339: %IP-5-WEBINST_KILL: Terminating DNS process
*Mar 1 00:01:20.627: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 2600 Software (C2691-ADVENTERPRISEK9-M), Version 12.4(25), R ELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Tue 21-Apr-09 10:48 by prod_rel_team
*Mar 1 00:01:20.639: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Router>y
Translating "y"...domain server (255.255.255.255)
(255.255.255.255)
Translating "y"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address
Router>
Router>ena
Router#hostname R2
^
% Invalid input detected at '^' marker.
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R2
R2(config)#
R2 con0 is now available
Press RETURN to get started.
*Mar 1 00:12:29.755: %SYS-5-CONFIG_I: Configured from console by console
R2>
R2>
R2>
R2>
R2>
R2>
R2 con0 is now available
Press RETURN to get started.
R2>enable
R2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#line console 0
R2(config-line)#loggin synchronous
R2(config-line)#interface f0/0
R2(config-if)#ip address 192.168.3.1 255.255.255.0
R2(config-if)#no shutdown
R2(config-if)#
*Mar 1 00:47:51.399: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state t o up
*Mar 1 00:47:52.399: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0/0, changed state to up
R2(config-if)#interface s0/0
R2(config-if)#ip address 192.168.2.2 255.255.255.0
R2(config-if)#no shutdown
R2(config-if)#
*Mar 1 00:49:05.603: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
R2(config-if)#
*Mar 1 00:49:06.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
R2(config-if)#end
R2#
*Mar 1 00:49:16.295: %SYS-5-CONFIG_I: Configured from console by console
R2#show ip interface brief
Interface IP-Address OK? Method Status Prot ocol
FastEthernet0/0 192.168.3.1 YES manual up up
Serial0/0 192.168.2.2 YES manual up up
FastEthernet0/1 unassigned YES unset administratively down down
Serial0/1 unassigned YES unset administratively down down
Serial0/2 unassigned YES unset administratively down down
Serial0/3 unassigned YES unset administratively down down
R2#ping 192.168.2.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/13/32 ms
R2#
R2#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
C 192.168.2.0/24 is directly connected, Serial0/0
C 192.168.3.0/24 is directly connected, FastEthernet0/0
R2#
R2#telnet 192.168.2.1
Trying 192.168.2.1 ... Open
ACCESO RESTRINGIDO - SOLO PERSONAL AUTORIZADO - TODAS LAS CONEXIONES SON REGISTRADAS
banner motd
User Access Verification
Password:
R1>enable
Password:
R1#show ip interface
FastEthernet0/0 is up, line protocol is up
Internet address is 192.168.1.1/24
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Local Proxy ARP is disabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP CEF switching is enabled
IP CEF Fast switching turbo vector
IP multicast fast switching is enabled
IP multicast distributed fast switching is disabled
IP route-cache flags are Fast, CEF
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Policy routing is disabled
Network address translation is disabled
BGP Policy Mapping is disabled
WCCP Redirect outbound is disabled
WCCP Redirect inbound is disabled
WCCP Redirect exclude is disabled
Serial0/0 is up, line protocol is up
Internet address is 192.168.2.1/24
Broadcast address is 255.255.255.255
Address determined by setup command
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Local Proxy ARP is disabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
IP fast switching on the same interface is enabled
IP Flow switching is disabled
IP CEF switching is enabled
IP CEF Fast switching turbo vector
IP multicast fast switching is enabled
IP multicast distributed fast switching is disabled
IP route-cache flags are Fast, CEF
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Policy routing is disabled
Network address translation is disabled
BGP Policy Mapping is disabled
WCCP Redirect outbound is disabled
WCCP Redirect inbound is disabled
WCCP Redirect exclude is disabled
FastEthernet0/1 is administratively down, line protocol is down
Internet protocol processing disabled
Serial0/1 is administratively down, line protocol is down
Internet protocol processing disabled
Serial0/2 is administratively down, line protocol is down
Internet protocol processing disabled
Serial0/3 is administratively down, line protocol is down
Internet protocol processing disabled
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#
R1#show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
C 192.168.1.0/24 is directly connected, FastEthernet0/0
C 192.168.2.0/24 is directly connected, Serial0/0
R1#
Top Related