ANALIZADORES DE RED - sebatelec.com€¦ · DKM-409S CARACTERISTICAS: Mediciones RMS verdaderas...
Transcript of ANALIZADORES DE RED - sebatelec.com€¦ · DKM-409S CARACTERISTICAS: Mediciones RMS verdaderas...
PRODUCTO TURCO 2019
DKM-405
CARACTERISTICAS: Mediciones RMS verdaderas
Pantalla de distorsión armónica total
Salida de relé configurable
Capacidad de salida de impulsos de energía.
Contadores de potencia reactiva activa.
Contador de horas
Relación de transformador de tensión para aplicaciones MT
Entrada digital opcional acepta señales de CA y CC
Diseñado para red de 230 / 400V
Tasa de muestreo de 4096 s/s rango de precisión del 0,5%
MEDICIONES: Tensiones de fase a fase:: U12-U23-U31
Tensiones de fase a neutro:: V1-V2-V3
Corrientes de fase:: I1-I2-I3
Potencia activa P1-P2-P3
Potencia reactiva: Q1-Q2-Q3
Potencia aparente: S1-S2-S3
Factor de potencia: cos1-cos2-cos3
Contadores de potencia activa: ∑P
Contadores de potencia reactiva: ∑Q
Potencia aparente Total: ∑S
Factor de Potencia Total: ∑cos
Medidor de Potencia Activa: Pc1
Medidor de Potencia Reactiva: Qc1
Contador de horas de Trabajo: Hc1
Valor THD de entradas de Tensión y Corriente.
ESPECIFICACIONES Entrada de alimentación 170-275 VAC, 45-66 Hz
TÉCNICAS: Diferentes voltajes de alimentación de CA disponibles
Voltaje de entrada: 10 - 300 V AC (L-N) / 20 - 520 V AC (L-L)
Entradas actuales: 0.2 - 5.5 A AC
Frecuencia: 30 - 100 Hz
DIMENSIONES: 102 x 102 x 53 mm
DKM-409S
CARACTERISTICAS: Mediciones RMS verdaderas
Puerto serie RS-485 completamente aislado
Comunicación MODBUS-RTU
2 salidas de relé configurables
Entradas digitales configurables y aisladas ópticamente.
Contadores duales conmutados de potencia activa-reactiva
Medición de energía de red / generador independiente
Relación de transformador de tensión para aplicaciones MT
PANTALLA: Pantalla LCD gráfica de alta visibilidad, 128x64 píxeles
MEDICIONES: Tensiones de fase a fase:: U12-U23-U31
Tensiones de fase a neutro:: V1-V2-V3
Corrientes de fase:: I1-I2-I3
Potencia activa P1-P2-P3
Potencia reactiva: Q1-Q2-Q3
Potencia aparente: S1-S2-S3
Factor de potencia: cos1-cos2-cos3
Contadores de potencia activa: ∑P
Contadores de potencia reactiva: ∑Q
Potencia aparente Total: ∑S
Factor de Potencia Total: ∑cos
Medidor de Potencia Activa: Pc1-Pc2
Medidor de Potencia Reactiva: Qc1-Qc2
Contadores Generales: USR1-USR2-USR3-USR4
ESPECIFICACIONES Entrada de alimentación 170-275 VAC, 50-60 Hz nominal
TÉCNICAS: Diferentes voltajes de alimentación de CA disponibles
Voltaje de entrada: 10 - 300 V AC (L-N) / 20 - 520 V AC (L-L)
Entradas actuales: 0.2 - 5.5 A AC
Frecuencia: 30 - 100 Hz
DIMENSIONES: 102 x 102 x 53 mm
Unidad base, sin puerto RS-485, sin E / S digital
ANALIZADORES DE RED
DATAKOM 1
PRODUCTO TURCO 2019
DKM-409S4
CARACTERISTICAS: Mediciones RMS verdaderas
Puerto serie RS-485 completamente aislado
Comunicación MODBUS-RTU
2 salidas de relé configurables
Capacidad de salida de impulsos de energía.
Entradas digitales configurables y aisladas ópticamente.
Contadores duales conmutados de potencia activa-reactiva
Medición de energía de red / generador independiente
Relación de transformador de tensión para aplicaciones MT
PANTALLA: Pantalla LCD gráfica de alta visibilidad, 128x64 píxeles
MEDICIONES: Tensiones de fase a fase:: U12-U23-U31
Tensiones de fase a neutro:: V1-V2-V3
Corrientes de fase:: I1-I2-I3
Potencia activa P1-P2-P3
Potencia reactiva: Q1-Q2-Q3
Potencia aparente: S1-S2-S3
Factor de potencia: cos1-cos2-cos3
Contadores de potencia activa: ∑P
Contadores de potencia reactiva: ∑Q
Potencia aparente Total: ∑S
Factor de Potencia Total: ∑cos
Medidor de Potencia Activa: Pc1-Pc2
Medidor de Potencia Reactiva: Qc1-Qc2
Contadores Generales: USR1-USR2-USR3-USR4
2-31 armónicos de tensión y entrada de corriente.
ESPECIFICACIONES Entrada de alimentación 170-275 VAC, 50-60 Hz nominal
TÉCNICAS: Diferentes voltajes de alimentación de CA disponibles
Voltaje de entrada: 10 - 300 V AC (L-N) / 20 - 520 V AC (L-L)
Entradas actuales: 0.2 - 5.5 A AC
Frecuencia: 30 - 100 Hz
DIMENSIONES: 102 x 102 x 53 mm
Unidad base, puerto RS-485, sin E / S digital
DKM-409
CARACTERISTICAS: Mediciones RMS verdaderas
Puerto serie RS-485 completamente aislado
Comunicación MODBUS-RTU
2 salidas de relé configurables
Capacidad de salida de impulsos de energía.
Entradas digitales configurables y aisladas ópticamente.
Contadores duales conmutados de potencia activa-reactiva
Medición de energía de red / generador independiente
Relación de transformador de tensión para aplicaciones MT
PANTALLA: Pantalla LCD gráfica de alta visibilidad, 128x64 píxeles
MEDICIONES: Tensiones de fase a fase:: U12-U23-U31
Tensiones de fase a neutro:: V1-V2-V3
Corrientes de fase:: I1-I2-I3
Potencia activa P1-P2-P3
Potencia reactiva: Q1-Q2-Q3
Potencia aparente: S1-S2-S3
Factor de potencia: cos1-cos2-cos3
Contadores de potencia activa: ∑P
Contadores de potencia reactiva: ∑Q
Potencia aparente Total: ∑S
Factor de Potencia Total: ∑cos
Medidor de Potencia Activa: Pc1-Pc2
Medidor de Potencia Reactiva: Qc1-Qc2
Contadores Generales: USR1-USR2-USR3-USR4
2-31 armónicos de tensión y entrada de corriente.
ESPECIFICACIONES Entrada de alimentación 170-275 VAC, 50-60 Hz nominal
TÉCNICAS: Voltaje de entrada: 10 - 300 V AC (L-N) / 20 - 520 V AC (L-L)
Entradas actuales: 0.2 - 5.5 A AC
Frecuencia: 30 - 100 Hz
DIMENSIONES: 102 x 102 x 53 mm
Unidad base, puerto RS-485, 2 entradas digitales, 2 salidas digitales
DATAKOM 2
PRODUCTO TURCO 2019
DKM-411
CARACTERISTICAS: Mediciones RMS verdaderas, 0.2% de precisión
Visualización del diagrama de fasor
Batería interna respaldada en tiempo real.
2 entradas digitales opto-aisladas, configurables
2 salidas de relé configurables
Capacidad de salida de impulsos de energía.
Contadores duales de potencia activa-reactiva
Medición de energía tanto de la red como del generador.
Relación de transformador de tensión para aplicaciones MT
PANTALLA: TFT LCD de 3.5 ", 320x240 píxeles
Pantalla de distorsión armónica (63 armónicos)
MEDICIONES: Tensiones de fase a fase: U12-U23-U31-Uavg
Tensiones de fase a neutro: V1-V2-V3-Vavg
Corrientes de fase: I1-I2-I3-In-Iavg-Itot
Potencia activa: P1-P2-P3-∑P
Potencia reactiva: Q1-Q2-Q3-∑Q
Potencia aparente: S1-S2-S3-∑S
Factor de potencia: cos1-cos2-cos3-∑cos
Contadores de potencia activa: Pc1-Pc2
Contadores de potencia reactiva: Qc1-Qc2
Contadores de usuarios: USR1-USR2-USR3-USR4
2 ... 63 armónicos de cualquier tensión o corriente.
Ángulos de vector de fase a neutros
Fases de fase a fase vector ángulos
Diagrama vectorial de fasor
ESPECIFICACIONES Entrada de alimentación 85 A 300V AC, 50-60 Hz nominal
TÉCNICAS: Voltaje de entrada: 5 - 300 V AC (L-N) / 10 - 520 V AC (L-L)
Entradas actuales: 0.1 - 5.5 A AC
Frecuencia: 30 - 500 Hz
Rango CT: 5/5A a 10'000/5A
DIMENSIONES: 102 x 102 x 53 mm
DATAKOM 3
DKM-405
NETWORK ANALYSER
WITH TOTAL HARMONIC
DISTORTION DISPLAY
The DKM-405 is a low cost precision instrument designed to display various AC parameters in a 3-phase distribution panel.
The standard unit is designed for 230/400V network. A different version is available for 120/208V systems.
The harmonic analysis is available for up to 31 harmonics. THD values of both voltage and current inputs are available.
The optional digital input accepts both AC and DC signals and has programmable functions.
The optional relay output is programmable. Relay function is selected through a list.
The unit fits into a standard 92x92mm panel opening.
Phase to phase voltages: U12-U23-U31
Phase to neutral voltages: V1-V2-V3
Phase currents: I1-I2-I3
Phase active power: P1-P2-P3
Phase reactive power: Q1-Q2-Q3
Phase apparent power: S1-S2-S3
Phase power factor: cos1-cos2-cos3
Total active power: ∑P
Total reactive power: ∑Q
Total apparent power: ∑S
Total power factor: ∑cos
Active power counter: Pc1
Reactive power counter: Qc1
Hour counter: Hc1
Total Harmonics of any voltage or current
True RMS measurements
Total harmonic distortion display
Max demand display
Configurable relay output
Energy pulse output capability
Optically isolated, configurable digital input
Active-reactive power counters
Hour counter
Voltage transformer ratio for MV applications
Front panel programming
Reduced panel depth
Wide operating temperature range
Sealed front panel (IP54)
Plug-in connection system
INTRODUCTION
MEASURED PARAMETERS
FEATURES
Power Supply Input: 170 - 275VAC, 50 - 60Hz nominal (± 10%) Different supply voltages available. Measurement Input Range:
Voltage: 10 - 300 V AC (L-N) 20 - 520 V AC (L-L) Current: 0.2 - 5.5 A AC Frequency: 30 - 100 Hz
Accuracy: Voltage: 0.5%+1digit Current: 0.5%+1 digit Frequency: 0.5%+1 digit Power(kW,kVAr): 1.0%+2digit Power factor: 2.0%+2digit Measurement Range: CT range: 5/5A to 5000/5A
VT range: 0.1/1 to 200.0/1 kW range: 0.1 kW to 6.5MW
Power Consumption: < 4 W Voltage burden: < 0.1VA per phase Current burden: < 1VA per phase Relay Output: 5A @ 250V AC Digital Input: Active level: 5 to 30V-DC or AC Min pulse: 250ms. Isolation: 1000V AC, 1 minute Operating Temperature:
-20°C to +80°C (-4 to +176 F). Maximum humidity: 95% non-condensing. Degree of Protection: IP 54 (Front Panel) IP 30 (Back panel) Enclosure: Non-flammable, ROHS compliant Installation: Flush mounting with rear brackets Dimensions: 102x102x53mm (WxHxD) Panel Cutout: 92x92mm Weight: 200 gr
EU Directives: 2006/95/EC (LVD) 2004/108/EC (EMC)
Norms of reference: EN 61010 (safety) EN 61326 (EMC)
Pieces per Package: 12 pieces Package Size: 280 x 170 x 215mm Package Weight: 2.6 kg
CONNECTION DIAGRAM
MOUNTING TOLERANCES
PANEL CUTOUT DIMENSIONS
TECHNICAL SPECIFICATIONS
PACKAGING INFORMATION
DKM-409
NETWORK ANALYSER
WITH HARMONIC
MEASUREMENT AND
SCOPEMETER
The DKM-409 is a precision instrument designed for displaying various AC parameters in 3-phase distribution panels.
Thanks to its isolated RS-485 Modbus RTU communication port, the device is free from ground potential difference issues and measured parameters are safely transferred to factory and building automation systems.
The power supply of the unit is isolated, thus the device can be used safely in 230/400V systems.
The graphic screen allows display of waveforms and harmonic analysis graphs.
Various display screens can be scrolled automatically. The user configurable screen where any measured parameter set can be displayed, transforms the unit to a custom designed measurement panel.
The unit fits into a standard 92x92mm panel opening.
Phase to phase voltages: U12-U23-U31
Phase to neutral voltages: V1-V2-V3
Phase currents: I1-I2-I3
Phase active power: P1-P2-P3
Phase reactive power: Q1-Q2-Q3
Phase apparent power: S1-S2-S3
Phase power factor: cos1-cos2-cos3
Total active power: ∑P
Total reactive power: ∑Q
Total apparent power: ∑S
Total power factor: ∑cos
Active power counters: Pc1-Pc2
Reactive power counters: Qc1-Qc2
User counters: USR1-USR2-USR3-USR4
2...31 Harmonics of any voltage or current
True RMS measurements
Harmonic distortion display (31 harmonics)
Oscilloscope, waveform display
Max demand display
User configurable display screen
Fully isolated RS-485 serial port
MODBUS-RTU communication
2 configurable relay outputs
Energy pulse output capability
Optically isolated, configurable digital inputs
Switched dual active-reactive power counters
Independent mains/generator energy metering
Configurable user counters
Voltage transformer ratio for MV applications
Password protected front panel programming
High visibility, 128x64 pixels graphic LCD
Reduced panel depth
Wide operating temperature range
Sealed front panel (IP54)
Plug-in connection system
MEASUREMENTS
INTRODUCTION
FEATURES
Power Supply Input: 170 - 275VAC, 50 - 60Hz nominal (± 10%) Measurement Input Range:
Voltage: 10 - 300 V AC (L-N) 20 - 520 V AC (L-L) Current: 0.2 - 5.5 A AC Frequency: 30 - 100 Hz
Accuracy: Voltage: 0.5%+1digit Current: 0.5%+1 digit Frequency: 0.5%+1 digit Power(kW,kVAr): 1.0%+2digit Power factor: 2.0%+2digit Measurement Range: CT range: 5/5A to 5000/5A
VT range: 1.0/1 to 5000.0/1 kW range: 1.0 kW to 50.0 MW
Power Consumption: < 4 VA Voltage burden: < 0.1VA per phase Current burden: < 1VA per phase Relay Outputs: 5A @ 250V AC Digital Inputs: Active level: 5 to 30V-DC or AC Min pulse: 250ms. Isolation: 1000V AC, 1 minute Serial Port: Signal level: RS-485 Protocol: Modbus RTU Data Rate: 9600 bauds Isolation: 500V AC, 1 minute Operating Temperature:
-20°C to +70°C (-4 to +158 F). Maximum humidity: 95% non-condensing. Degree of Protection: IP 54 (Front Panel) IP 30 (Back panel) Enclosure: Non-flammable, ROHS compliant Installation: Flush mounting with rear brackets Dimensions: 102x102x53mm (WxHxD) Panel Cutout: 92x92mm Weight: 350 gr
EU Directives: 2006/95/EC (LVD) 2004/108/EC (EMC)
Norms of reference: EN 61010 (safety) EN 61326 (EMC)
Pieces per Package: 12 pieces Package Size: 280 x 170 x 215mm Package Weight: 4.4 kg
CONNECTION DIAGRAM
MOUNTING TOLERANCES
PANEL CUTOUT DIMENSIONS
TECHNICAL SPECIFICATIONS
PACKAGING INFORMATION
DKM-411 POWER ANALYSER
• COLOUR TFT SCREEN
• IP COMMUNICATIONS
• HARMONIC ANALYSIS
• SCOPEMETER
The DKM-411 is an advanced precision metering device offering an 3.5” size, 320x240 pixel color TFT, together with unrivalled remote monitoring capabilities over internet in a compact and low cost package.
The unit itself is a web page and can be opened through any browser for remote monitoring.
The central monitoring feature allows monitoring of thousands of meters from one central PC.
True RMS measurements, 0.2% accuracy
3.5” TFT LCD, 320x240 pixels
Harmonic distortion display (63 harmonics)
Oscilloscope, waveform display
Phasor diagram display
Internal battery backed-up real time clock
Max demand display
User configurable display screen
2 configurable relay outputs
Energy pulse output capability
2 opto-isolated, configurable digital inputs
Dual active-reactive power counters
Both mains/generator energy metering
Configurable user counters
Voltage transformer ratio for MV applications
Password protected front panel programming
Reduced panel depth
Sealed front panel (IP54)
Phase to phase voltages: U12-U23-U31-Uavg
Phase to neutral voltages: V1-V2-V3-Vavg
Phase currents: I1-I2-I3-In-Iavg-Itot
Active power: P1-P2-P3-∑P
Reactive power: Q1-Q2-Q3-∑Q
Apparent power: S1-S2-S3-∑S
Power factor: cos1-cos2-cos3-∑cos
Active power counters: Pc1-Pc2
Reactive power counters: Qc1-Qc2
User counters: USR1-USR2-USR3-USR4
2...63 Harmonics of any voltage or current
Phase to neutral voltages vector angles
Phase to phase voltages vector angles
Phasor vector diagram
Modbus RTU RS-485 Modbus TCP/IP SNMP TCP/IP server TCP/IP client UDP SMTP Embedded web server Web monitoring Web programming GSM-SMSsending e-mailsending Central Monitoring through IP Free configuration & monitoring software
Ethernet 10/100Mb RS-485 isolated (Modbus RTU) RS-232 for external GPRS modem USB Host for data recording on flash memory USB Device for PC connection
3 phases 4 wires, star 3 phases 3 wires, 3 CTs 3 phases 3 wires, 2 CTs (L1-L2) 3 phases 3 wires, 2 CTs (L1-L3) 3 phases 4 wires, delta 2 phases 3 wires, L1-L2 2 phases 3 wires, L1-L3 1 phase 2 wires
FEATURES
MEASUREMENTS
COMMUNICATIONS
SUPPORTED TOPOLOGIES
COMMUNICATION PORTS
o
Power Supply Input: 100-240V AC nominal(± 20%), 50 - 60Hz nominal DC supply versions available. Power Consumption: < 5 VA Measurement Input Range:
Voltage: 5 - 300 V AC (L-N) 10 - 520 V AC (L-L) Current: 0.1 - 5.5 A AC Frequency: 30 - 500 Hz
Accuracy: Voltage: 0.2%+1digit Current: 0.2%+1 digit Frequency: 0.1%+1 digit Power(kW,kVAr): 0.4%+2digit Power factor: 0.2%+1digit Measurement Range: CT range: 5/5A to 10’000/5A
VT range: 0.1/1 to 200.0/1 kW range: 0.1 kW to 6.5MW
Voltage burden: < 0.1VA per phase Current burden: < 1VA per phase Relay Outputs: 5A @ 250V AC Digital Inputs: Active level: 5 to 30V-DC or AC Min pulse: 250ms. Isolation: 1000V AC, 1 minute Operating Temperature: -20°C to +50°C (-4 to +176 °F). Maximum humidity: 95% non-condensing. Degree of Protection: IP 65 (Front), IP 30 (Back) Enclosure: Non-flammable, ROHS compliant Installation: Flush mounting with rear brackets Dimensions: 102x102x53mm (WxHxD) Panel Cutout: 92x92mm Weight: 350 gr
UL-CSA Certification: UL 61010-1, 3rd Edition, 2012-05, CAN/CSA-C22.2 (File: E475547, Vol. D1) EU Directives:
2006/95/EC (LVD) 2004/108/EC (EMC)
Norms of reference:
EN 61010 (safety) EN 61326 (EMC)
CONNECTION DIAGRAM
TECHNICAL SPECIFICATIONS
COMMUNICATION DIAGRAM
o
RAINBOW PROGRAM
o
o
Web Monitoring Web Monitoring Event Log Display
CENTRAL MONITORING
EMBEDDED WEB SERVER